Rointe KYROS KRI0330RAD3 User manual

KYROS
INSTRUCTION MANUAL
DIGITAL ELECTRONIC RADIATOR
Information, operation & installation

2
Contents:
1. Introduction.............................................................................................................................................. 3
2. Product information and operation .................................................................................................... 3
2.1. Control panel ............................................................................................................................... 3
2.2. Switching on and off (stand-by) ................... ............................................................................... 5
2.3. Adjust the day and time ............................................................................................................... 5
2.4. Adjust the temperature ................................................................................................................ 6
2.5. Lock the control panel ................................................................................................................. 6
2.6. Main Menu................................................................................................................................... 7
2.6.1. Settings sub-menu ............................................................................................................7
2.6.2. Energy sub-menu.............................................................................................................. 8
2.6.3. Equilibrium / Balance sub-menu .....................................................................................10
2.6.4. Program sub-menu......................................................................................................... 10
2.7. OPEN WINDOWS function..........................................................................................................17
2.8. Fuzzy Logic Energy Control technology ................................................................................... 18
3. Installation and mounting ................................................................................................................. 18
3.1 Mounting instructions ................................................................................................................ 18
3.2 Installing and fixing the supports .............................................................................................. 19
4. Maintenance and cleaning ............................................................................................................... 20
5. Installation and safety precautions ................................................................................................. 20
5.1. Installation precautions ............................................................................................................. 20
5.2. Safety precautions..................................................................................................................... 20
6. Rointe Product Guarantee................................................................................................................ 21
7. European Directive..................................................................................................................................23
8. Dimensions & Technical Characteristics.......................................................................................... 24
9. Certificate of Guarantee.........................................................................................................................25

3
1. Introduction
Designed with the user in mind, this product contains an exclusive electronic temperature pro-
grammer and is manufactured with high quality components. This product has passed the most
demanding quality controls to meet rigorous safety standards and efficiency requirements. This
product is designed for fixed installation only. The main features of this product are:
• A backlit display
• Safety thermostat
• Low consumption due to patented Fuzzy Logic Energy Control technology
• 4 pre-installed programmes
• Visual menus
• Infrared communication (compatible with AIR Control and BASIC Control remote controls)
• Equilibrium function
• OPEN WINDOWS function
IMPORTANT - Please read this Instruction Manual carefully to ensure correct operation. It is impor-
tant that this manual is left with the product after installation.
2. Product information and operation
2.1. Control panel
2.1.1. Keypad
ICON DESCRIPTION
On / Off button
Accept / Confirm button
Decrease temperature button
Move left button
Increase temperature button
Move right button
Menu button
Move upwards button
MANUAL / AUTOMATIC button
Move downwards button

4
2.1.2. Display panel
* PILOT WIRE function not available in UK. Only on demand.*
2.1.3. Symbol information
SYMBOL DESCRIPTION SYMBOL DESCRIPTION
OPEN WINDOWS function - active no
detection AUTOMATIC function active
OPEN WINDOWS function - active,
detection MANUAL function active
Energy consumption status - green /
amber / red
PILOT WIRE function active
* Not available in UK. Only on demand.*
Heating element active AUTOMATIC function active when USER
mode active
Fuzzy Logic Control technology active MANUAL function active when USER
mode active
COMFORT mode active
PILOT WIRE function active when USER
mode active
* Not available in UK. Only on demand.*
ECO mode active Control panel locked through keypad
ANTI-FROST mode active Control panel locked through remote
NO. DESCRIPTION
1Programming
2Days of the week
3Time of day
4Temperature selected
5Control panel locked / unlocked
6MANUAL / AUTOMATIC / PILOT WIRE function indicator
7COMFORT / ECO / ANTI-FROST mode indicator
8Fuzzy Logic Energy Control technology indicator
9Heating element active indicator
10 Energy consumption indicator
11 OPEN WINDOWS function indicator

5
2.2. Switching on and off (stand-by)
To switch the product on, please press the button on the keypad once.
The image to the right will appear on the display panel when the product is
switched on.
After 5 seconds the temperature, time and days of the week will show on the
display panel.
To switch the product off, please press the button again once.
The product will go into stand-by mode with the word ‘STAND-BY’ displayed on
the display panel. After 5 seconds the Rointe logo will appear.
2.3. Adjust the day and time
To set the day and time, please press the button on the keypad to access
the Main Menu. Select the `Settings´ menu using the or buttons on
the keypad.
To move left press the button and to move right press the button. Once
the icon is highlighted on the display panel, press the button to access.
Now use the and buttons again to select the clock option and press
to access.
Use the and buttons to set the hour and then press to confirm.
Then use the and buttons to set the minutes and press to
confirm. Finally, use the and buttons to set the day (1 = Monday, 2 =
Tuesday etc.) and confirm by pressing the button.

6
2.4. Adjust the temperature
To change the temperature, please press the or the button. To decrease
the temperature press the button and to increase the temperature press the
button.
When the room temperature is lower than the set temperature on the display
panel, the product will come on with the symbol appearing in the top right
of the display panel.
When the Fuzzy Logic Energy Control technology is activated the symbol
will replace the symbol in the top right of the display panel.
To learn more about Fuzzy Logic Energy Control technology please see section
2.8.
2.5. Lock the control panel
You can lock the keypad from the product or from a remote control* (optional).
To lock the keypad manually, please hold and press the button AND the
button TOGETHER for 3 seconds. The symbol will appear on the display panel
and the keys will not respond.
To unlock the keypad manually, please hold and press the button AND the
button TOGETHER for 3 seconds.
*To lock the keypad using a remote control, please see the corresponding
instruction manual for the remote control separately.
Please note that the product is locked using a remote control then it can only
be unlocked using the remote control. If the product is locked using a remote
control and you press the keypad on the product then the following image will
appear on the display panel.

7
2.6. Main Menu
The Main Menu is accessed by pressing the menu button. You can navigate
through the different options available on the menu by pressing the and
buttons to move left and right respectively and to scroll through all 4 options.
The selected sub-menu will be highlighted with a frame, as shown in the image
to the right on the `Settings´ section of the display panel.
The below icons displayed on the screen take you to the following sub-menus:
Settings Energy Equilibrium
/ Balance Program
2.6.1. Main Menu: Settings sub-menu
The `Settings´ sub-menu configures the technical parameters of your product.
To access, select the icon displayed in the Main Menu screen and press
to confirm.
Use the and buttons to move across the different options on the sub-
menu to choose your parameter and press to access.
The below icons displayed on the screen take you to the following parameters:
Display backlight
brightness Clear Memory Language Time
• Adjust display backlight brightness
This allows you to change the brightness of the display panel in both the STAND-
BY and ON modes separately. To change the brightness of the display panel
ensure the icon is highlighted and press the button to confirm. Then
with the and buttons you can switch between the two modes.
With the and buttons you can increase or decrease the brightness as
you wish. The cursor indicates the intensity of the light. Once you have set the
required brightness press the button to save and exit.

8
• Clear the memory
This allows you to clear any information saved in your product.
To clear the memory ensure the icon is highlighted in the `Settings´ sub-
menu and press the button to confirm.
The display panel will show when completed and the language will change to
default.
• Change the language
To change the language of your product, ensure the icon is highlighted in
the `Settings´ sub-menu and press the button to access.
Use the and buttons to move up or down respectively until your chosen
language is highlighted and confirm by pressing the button.
• Adjust the day and time
This option sets the hour, minutes and day of the week in your product. Please
refer to section 2.3.
2.6.2. Main Menu: Energy sub-menu
The `Energy´ sub-menu provides access to functions related to energy management
of the product. To access, select the icon displayed in the Main Menu screen
and press to confirm.
Use the and buttons to move across the different options on the sub-
menu to choose your function and press to confirm.
The below icons displayed on the screen take you to the following functions:
OPEN WINDOWS
function
Energy
Consumption status
Effective Power
function Information

9
• OPEN WINDOWS function
To set the OPEN WINDOWS* function, ensure the icon is highlighted in the
`Energy´ sub-menu and press the button to access.
Use the and buttons to move up or down respectively until your preference
is highlighted and confirm by pressing the button.
*To learn more about this function, please go to section 2.7.
• Energy Consumption status
To check the current consumption status of your product, ensure the icon is highlighted in
the `Energy´ sub-menu and press the button to access.
The display panel will then show a status according to the current state of consumption of the
product:
OK
CONSUMPTION
Up to 40%
effective power
CONSUMPTION
CAUTION
40% - 60%
effective power
CONSUMPTION
WARNING
More than 60%
effective power
• Effective Power function
To check the Effective Power status of your product, ensure the icon is
highlighted in the `Energy´ sub-menu and press the button to access.
The display panel will then show a status according to the current state of
consumption of the product:
• Working Time
• Total Time
After 6 seconds, the display panel will then show:
• Nominal Power (w)
• Effective Power* (w)
*The effective power is the actual value of its nominal power that the product
consumes during periods of operation.

10
• Information
This function will display the software version, the date of this release and the
rated power of the product.
To access this information, ensure the icon is highlighted in the `Energy´
sub-menu and press the button to confirm. The information will then show
in the display panel.
2.6.3. Main Menu: Equilibrium / Balance sub-menu
The `Balance´ sub-menu/function returns the product to a constant temperature
of 19°C. To activate this function ensure the icon is highlighted in the `Balance´
sub-menu and press the button to confirm.
The product will return to the display panel in MANUAL function, with the
temperature set to 19ºC.
2.6.4. Main Menu: Program sub-menu
This section explains the operational aspects of your product in its various functions and modes.
What are the functions of MANUAL, AUTOMATIC and PILOT WIRE functions?
MANUAL This function allows you to change the product between the COMFORT, ECO
and ANTI-FROST modes and to change the temperature (see section 2.4.).
AUTOMATIC This function will activate the programming that has previously been set in the
product.
PILOT WIRE
This function allows the product to be controlled by a central programmer.
* Not available in UK. Only on demand*
What are the COMFORT, ECO and ANTI-FROST modes?
COMFORT ECO ANTI-FROST
From 19ºC to 30ºC From 7.5ºC to 18.5ºC 7ºC