Rompa 22970 User manual

1. Product Name
LED Blacklight
2. Product Code
22970 –51cm
22971 –96.5cm
3. Colour
Not applicable
4. Brief Description
Use with fluorescent and glow products to enhance the visual effect.
5. Contents
1 x LED Blacklight
6. Snoezelen® Stimulations
Sight
7. Best Use
Best used in a darkened environment with UV responsive items, or items that are white.

8. Compatible ROMPA® Products
UV Dance Sacks (20051/20052), UV Textured Mat (20480), Neon Carpet Sets (21374), UV Scarves
(18979), Magic Wands (14020).
Our full range of ultraviolet responsive resources can be found at www.rompa.com.
9. Starting Up
Choose a location near a plug.
Position the LED Blacklights in a suitable place where UV reactive products can be
illuminated and enjoyed.
Switch on.
10. Detailed Description
Use with fluorescent and glow products to enhance the visual effect. 220-240V.
Size: 6 x 5cm
11. Safety
Always supervise the use of this product
Always make sure that you are connecting to the proper mains supply voltage.
This product is intended for indoor use only. It must be connected to an earthed mains
outlet.
To prevent risk of fire or shock, do not expose fixture to rain or moisture. Keep away from
flammable materials.
The unit must be installed in a location with adequate ventilation, at least 20cm from
adjacent surfaces.
Ensure that no ventilation slots are obstructed.
Always disconnect from your power source before servicing or replacing fuse and replace
with the same fuse size and type.
In the event of a serious operating problem, stop using the unit immediately. Never try
to repair the unit by yourself.
Repairs and servicing must be carried out by qualified service personnel only.
Make sure that the power cord is in good condition and not damaged.
Never disconnect the power cord by pulling or tugging on the cord.
Avoid direct eye exposure to the light source when it is on.

12. Technical Specification
22970
22971
LEDs
9 x 3W
18 x 3W
Power consumption
30W
60W
Dimensions
51 x 6 x 5cm
96.5 x 6 x 5cm
Weight
0.8kg
1.16kg
Power Supply
220-240Vac 50/60Hz
Fuse Rating
3A
LEDs
9 x 3W
LED Colour
UV (Ultraviolet)
Ultraviolet wavelength
410nm
13. Installation
1. Always ensure that the unit is firmly fixed using the end brackets provided.
2. Always ensure that the structure to which you are attaching the unit is secure and is able
to support the unit’s weight.
3. It is always advisable to use a safety cable when installing at height in a public place.
4. Connect UV bar to an appropriate mains outlet, ensuring the correct voltage and that
cables are in good condition.
5. Use the in-line power switch to switch power on or off.
6. Disconnect from mains power when not in use.
14. Care and Maintenance
Not applicable
15. Troubleshooting
Not applicable
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving them
further your comments will be greatly received –please contact us at
[email protected]om
LED BLACKLIGHT 22970, 22971, December 2017
Copyright ROMPA® Ltd