Room & Board Emerson Bed User manual

ASSEMBLY INSTRUCTIONS
Keep these instructions for future use
Emerson Bed Assembly Instructions
RECOMMENDED TOOLS AND MATERIALS:
• Power Drill
• Rubber mallet
THIS PRODUCT INCLUDES:
Twin, Full Queen, King California
King
Twin
w/ Storage
Full
w/ Storage
Queen
w/ Storage
King
w/ Storage
California
King
w/ Storage
Headboard 11111111
Footboard 11111111
Side rails 22222222
Steel slats 11 12 13 11 11 12 12 13
Drawer
assembly 11111
1 ¼"screws 24444
2 ½"screws 22222
L-bracket 1
¾"Truss
head screws
4
➊ With two people, stand up the headboard in the bed’s desired location in your room. Align the pegs on the side rail plate
with the holes in the headboard plate. Tap the side rails down to lock them into place. (Figures 1 and 2)
➋ Repeat this process with the footboard. (Figure 3)
Figure 1 Figure 2
Figure 3

1/17/19
Follow steps 3-6 only if assembling a storage bed
➌ Remove the drawers from the frame. Insert the frame so the back is resting on the blocking on the side rails, and the
front is resting on the rail. (Figure 4)
➍ Use the included 1 1/4” screws to attach the rail of the drawer case to the footboard. (Figure 5)
Figure 4 Figure 5
➎ Use the included2 1/2” screws to attach the back of the drawer box case to the side rails. Be sure both sides are flush
with the cleat to square the bed. (Figure 6)
King storage beds only: Attach L-bracket with supplied screws. (Figure 7)
Figure 6 Figure 7
➏ Insert the drawers, making sure the ball carriage is all the way forward. (Figure 8)
➐ Add the mattress slat support rails. Be sure the slat drops over the screw head. Once all mattress slat support rails are
in place, you may place your mattress on the bed. (Figure 9)
Figure 8 Figure 9
4600 Olson Memorial Highway | Minneapolis, Minnesota 55422 | www.roomandboard.com | 800.301.9720