Room & Board HALE BED User manual

ASSEMBLY INSTRUCTIONS
Keep these instructions for future use
HALE BED
800.486.6554 | roomandboard.com 6/28/21
Recommended Tools and Materials
• Phillips screwdriver
Note: We recommend completing the assembly of this bed with two people.
This Product Includes
A. Allen wrench
B. Upper headboard
C. Lower headboard
D. Headboard leg (x2)
E. Footboard
F. Footboard leg (x2)
G. Short canopy rail (x2)
H. Long canopy rail (x2)
I. Side rail (x2)
J. Steel bed slats
K. Cam lock bolts (x18)

800.486.6554 | roomandboard.com 6/28/21
1Assemble the complete headboard
by connecting the lower headboard,
upper headboard and a short canopy
rail to the two headboard legs.
a. Using your Phillips head
screwdriver, install 8 of the
included cam lock bolts in the
threaded inserts on the legs.
b.Wood dowels already installed in
the legs correspond to the holes
of the adjoining pieces.
c. Use the included Allen wrench to
tighten the cam locks.
Assemble the complete footboard by
connecting the footboard and a short
canopy rail to the two footboard legs.
a. Using your Phillips head
screwdriver, install 6 of the
included cam lock bolts in the
threaded inserts on the legs.
b.Wood dowels already installed in
the legs correspond to the holes
of the adjoining pieces.
c. Use the included Allen wrench to
tighten the cam locks.
2G.
G.
D.
D.
F.
B.
K.
C.
C.
E.

Attach the side rails to the
footboard assembly by inserting
the male end of a side rail
bracket into the female end of a
leg bracket. Push downwards to
lock into place.
3
800.486.6554 | roomandboard.com 6/28/21
Connect the side rails to the
headboard assembly by inserting
the male end of a side rail
bracket into the female end of a
leg bracket. Push downwards to
lock into place.
4
G.
G.
F.
F.
D.
B.
C.
E.
E.
I.
I.

800.486.6554 | roomandboard.com 6/28/21
Double check all cam locks are fully tightened prior to laying mattress on bed.
7
Place each of the steel bed slats
atop the corresponding screws
in each side rail.
6
Attach the long canopy rails to the
top of the bed.
a. Using your Phillips head
screwdriver, install 4 of the
included cam lock bolts in
the threaded inserts on the
footboard assembly and
headboard assembly.
b Wood dowels already installed
in the headboard assembly
correspond to the holes of the
adjoining pieces.
c. Use the included Allen wrench
to tighten the cam locks.
5
I.
J.

G.
F.
D.
H.
B.
C.
E.
I.
G.
F.
D.
H.
B.
C.
E.