Room & Board Plimode User manual

Parts
Instructions
Assembly Manual
Main body
This is an assembly manual for the plimode chair.
Please read this document before assembling the chair.
Main body
Base Gas cylinder
Base
Soft casters
(for hardwood
floors) - Qty 5
Gas cylinder
Gas cylinder
STEP 1
1. Place the base on a flat surface.
2. Insert gas cylinder into the base as shown.
Ensure that the gas cylinder is placed straight down
into the base.
1. Attach the main body to the gas cylinder as shown.
Do not hold the arms of the main body. Hold the
parts indicated by the arrows in the figure.
STEP 2

Notes
●The main body is heavy. Please use extra caution when attaching it to the gas
cylinder.
●Do not hold the arms of the main body. Hold the parts indicated by the arrows in the
figure in STEP 2 when you attach the main body to the gas cylinder.
●To purchase additional casters or hard casters (for carpeted floors), or for any
service related questions, please contact a Room & Board Design Associate at
800-301-9720.
Room and Board Shop From Home Design associates at 800-301-9720.