Ropox 40-44016 User manual

Ropox Support Washbasin
Electric
USER MANUAL
Keep this manual with the product at all times
PDF 6122 / 01.10.2015 PA 2004 00634

Page 2
© ROPOX 2014
Contents
PRODUCT INFORMATION............................................................................................................................... 3
G ENERAL PRODUCT INFORMATION ..................................................................................................................... 3
A PPLICATION .................................................................................................................................................... 4
D IMENSION SKETCHES ...................................................................................................................................... 5
I NSTALLATION INTERFACES ............................................................................................................................... 6
S PARE PARTS ................................................................................................................................................... 9
A CCESSORIES .................................................................................................................................................. 9
C LEANING ...................................................................................................................................................... 10
MOUNTING INFORMATION ........................................................................................................................... 11
M OUNTING INSTRUCTIONS AND LIST OF COMPONENTS ...................................................................................... 11
USER INFORMATION .................................................................................................................................... 12
L ABEL ............................................................................................................................................................ 12
S YMBOLS ....................................................................................................................................................... 12
W IRING DIAGRAMS .......................................................................................................................................... 13
E LECTRIC CONNECTIONS ................................................................................................................................ 14
D ISMOUNTING ................................................................................................................................................ 14
P OSITIONING OF CONTROL SWITCH . ................................................................................................................. 14
S AFETY INSTRUCTIONS ................................................................................................................................... 15
SERVICE INFORMATION............................................................................................................................... 16
F AULT FINDING ............................................................................................................................................... 16
M AINTENANCE ................................................................................................................................................ 17
P ERFORMANCE TEST ...................................................................................................................................... 17
CE MARKING .................................................................................................................................................. 19
EU – D ECLARATION OF C ONFORMITY .............................................................................................................. 19
COMPLAINTS ................................................................................................................................................. 20
It is important to read this manual prior to mounting and
use

Page 3
© ROPOX 2014
Product information
General product information
Owing to the unique design, Ropox Support Washbasin Electric provides additional
support and easy access to the washbasin for wheelchair users and walking impaired
persons The electrical height adjustment facilitates frequent adjustment of the washbasin
to suit several users The height adjustment range is 25cm
The ample space for knees and legs makes the washbasin ideal for wheelchair users, who
obtain optimum mobility and a perfect working position
The integrated grab handles facilitate access and owing to the unique design, the user
may get very close to the washbasin
This manual must always be at the disposal of the user and must accompany the product
in case of relocation
Technical data
Product name: Ropox Support Washbasin Electric
Item numbers: 40-44016 Left
40-44017 Right
Height adjustment: 25 c (71-96c )
Power supply: 230V, 50Hz, ax. 2.0A
Duty cycle: Max. 10% = 2 in. operation/18 in. pause
IP-protection: All electrical co ponents have IPX6 protection
Materials: Pedestal: Welded steel tube St. 37
Alu iniu alloy 606045-T6
Various plastic co ponents
Washbasin: Synthetic/co posite arble
Cover plate: Vacuu -shaped ABS
Surface treatment: Powder coating RAL 9010 at white, chro ite, gel coat
Max load: Tested and safe up to and including 400 kg
Max. user weight according to DS/EN 12182: 200 kg
Own weight: 38 kg
Application temperature: 10-40° C
Manufacturer: Ropox A/S
DK-4700 Næstved,
Tel. [phone]
E- ail: [email protected]
This product has CE marking and therefore meets the basic requirements
concerning performance and safety of the current Machinery Directive All types
of the Ropox Support Washbasin are made in accordance with the relevant
requirements of the Medical Devices Directive No 93/42/EEC and are all in the
lowest risk class 1

Page 4
© ROPOX 2014
Product information
Application
Ropox Support Washbasin Electric is adjustable in height and offers optimum working
height for user and carer. Do NO use Ropox Support Washbasin as a lifting table or
person lifter.
Height adjustment using handheld control switch with spiral cable (standard)
Fixed control switch (option)

Page 5
© ROPOX 2014
Product information
Dimension sketches
40-44016
Left

Page 6
© ROPOX 2014
Product information
Installation interfaces
Construction
The wall must be made of material suitable for screwing and approved for damp rooms
Tested and safe up to and including 400kg According to DS/EN 12182, the maximum user
weight has been fixed at 200kg
Max load of upper screws: 71kg/screw
Minimum areas for reinforcement of wall are the hatched areas
Power
Recommended positioning of power supply point in wall for optimum and hidden wiring In
case of alternative location, the cable of the control unit has a length of 3 2m
Water
The drain is Ø32 and ends with an Ø32x88 5° drain elbow
Connection of drain and elbow should not protrude more than 90mm from the wall owing
to the cover plates
The water supply ends with two 90° stop valves with ½” outside thread Location and
optimum orientation as illustrated
The stop valves should not protrude more than 90mm from the wall owing to the cover
plates
We recommend positioning of water and drain installations as illustrated All hoses for
water and drain installations must be flexible to ensure unhindered movement within the
height adjustment range of 71-96 cm (including washbasin)
If another location of water supply and drain is required, the Support Washbasin will be
without cover plates
The drain may also be positioned in the floor, but in that case the cover plates cannot be
used

Page 7
© ROPOX 2014
Product information
Positioning of water supply, drain and power
Red = Power, Blue = Water supply, Green = Drain
40-44016
Note: Stop valves pointing downward.
40-44017
Note: Stop valves pointing upward.

Page 8
© ROPOX 2014
Connection adapters
If the recommendations cannot be met, the components shown below are available
depending on the type of installation in the building.
Water connection adapters
Hoses fro washbasin Adapter Installation in
roo not provided)
No adapter required
1/2"
Thread
1/2" -> 3/8"
Item No. 97001670
3/8"
Thread
1/2" -> 15mm
Item No.
97001666
15mm
Pipe
Hose extension
Hose fro washbasin Coupling piece Extra hose
1/2" -> 1/2"
Item No. 97001662
1/2" x 1/2", 0,5m, steel
Item No. 97001123
1/2" x 1/2", 1m, plastic
Item No. 97001120
Drain adapters
Drain hose fro washbasin Adapter Installation in
roo not provided)
Ø40 -> Ø32
Item No. 97002104
Ø32
No adapter required
Ø40
Ø40 -> Ø50
Item No. 97001664
Ø50
Drain hose extension
Drain hose fro washbasin Coupling piece Extra drain hose
Ø40-Ø40
Item No. 97001663
Ø40 Flex h se, 40-110cm
Item No. 97001160
Ø40 Flex h se, 51-150cm
Item No. 97001159
1/2”
Ø40
Ø40

Page 9
© ROPOX 2014
Product information
Spare parts
Handheld control switch
Item No. 97001655
otor
Item No. 97000481
Control unit
Item No. 97000421
Accessories
Water supply and drain kit
Item No. 40-44025
Cover plate kit, left
Item No. 40-44023
Cover plate kit, right
Item No. 40-44024
Fixed control switch (including odular Junction Box)
Item No. 40-44026
ixer tap Oras Saga
Item No. 40-44040
Auxiliary lever for Oras Saga mixer tap
Item No. 40-14680
ixer tap, Damixa Clover Easy
Item No. 40-44044
No-touch mixer tap Oras Electra 6250F
Item No. 40-44045
Ropox overflow plug
Item No. 40-40935

Page 10
© ROPOX 2014
Product information
Cleaning
The washbasin may get dirty during use It is very important to clean the washbasin as
described in these instructions
Simply dry the Ropox Support Washbasin Electric with a wrung cloth with lukewarm water
and a customary cleaning agent Do not use etching/grinding fluids or grinding cloths,
brushes and sponges
Cleaning of table top and washbasin
The washbasin is made of a composite material of marble and synthetic granulates with a
gel coat surface This gives a hard and hardwearing finish, which is easy to keep clean
Wash the surfaces daily and dry with a cloth Do not use cleaning agents containing
abrasives, e g steel wool, scouring powder or sulphur acid
If the water is calcareous, deposits may occur Remove these calcareous deposits once a
week with a cleaning agent containing citric acid, ethanoic acid or phosphoric acid Leave
the cleaning agent for 5-10 minutes, depending on the thickness of the deposits, and clean
with a soft scouring sponge
Disinfection of the washbasin may be made using customary disinfectants
Repair of the washbasin
Minor damage or limited discolouration of the surface may be repaired by means of a
special repair kit Please contact Ropox for further information

Page 11
© ROPOX 2014
Mounting information
Mounting instructions and list of components
See separate mounting instructions
Performance test
After completed installation and before use, all functions of the Ropox Support Washbasin
Electric must be tested After that, a performance test must be carried out at least once a
year by competent personnel:
1 Check that the mounting instructions have been observed
2 Check that all bolts have been securely tightened
3 Check that drain and hoses have been connected correctly
4 Make sure that there is no load on the washbasin
5 Make sure that there are no objects preventing the washbasin from moving up and
down within the height adjustment range
When this test has been carried out successfully, the Ropox Support Washbasin Electric is
ready for use See ”Safety instructions”
NOTE:
When mounting screws in the wall, always consider the strength and nature of
the wall The screws provided are only intended as a guide for installation on a
reinforced wall according to the maximum screw loads specified in the
mounting instructions

Page 12
© ROPOX 2014
User information
Label
Each washbasin has a label of its own as illustrated. his label contains important
information to be stated in connection with inquiries to the supplier
Symbols:
he user manual must be read prior to use.
Waste must be sorted – if possible for recycling.
Ropox is the manufacturer of this product.
CE marking. his product meets the requirements for General Safety and
Functionality of the relevant EU Directives and Standards.
Ropox Support Washbasin,
Electric, Right
4
0
-
440 7
200 KG

Page 13
© ROPOX 2014
User information
Wiring diagrams
he Support Washbasin Electric will be delivered assembled with all electrical components
and cables. All you have to do is to insert the mains cable into the socket. he diagram
shows connection of the cables with the control unit located behind the side covers.
Washbasin with handheld control switch
1. Control unit
2. 230V ains cable
3. Motor, connected to port 2
4. Handheld control switch connected to port HB
Washbasin with fixed control switch (option, item No. 40-44026)
1. Control unit
2. 230V ains cable
3. Motor, connected to port 2
4. Fixed control switch
5. MJB box
1
Blind plugs
2
3
4
1
Blind plugs
2
3
4

Page 14
© ROPOX 2014
Safety lock fitting
User information
Electric connections
he motor cable is connected to port 2. Ports 1, 3
& 4 are not used and have therefore been
provided with blind plugs.
If the washbasin is supplied with a handheld
control switch, this is connected direct to port
”HB”. If it is supplied with a fixed control switch,
this is coupled to an MJB box connected to ”HB”.
A safety lock fitting must be used after mounting
of all cables. Push this fitting over the plugs until a
“click” is heard.
he 230V cable is connected to the port on the side
of the control unit.
Dismounting
Just pull out the 230V cable.
Before dismounting the remaining cables from the control unit, the safety lock fitting must be
removed. Release the locking clips at either end of the fitting and pull it out. Now the cables
may be dismounted.
Positioning of control switch
In order to maintain the full IPX6 protection it is very important that all cable
connections and the safety lock fitting have been mounted correctly.
he handheld control switch may be placed
in one of the three grab handles or on the
wall on the bracket provided.
Recommended positioning of fixed control
switch (option) as illustrated. If another
location is required, please state when
ordering.

Page 15
© ROPOX 2014
User information
Safety instructions
• The height adjustment of Ropox Support Washbasin Electric should only be operated
by persons who have read and understood these instructions
• Do not use Ropox Support Washbasin Electric as a lifting table or person lifter
• Always use the washbasin in a manner excluding the risk of damage to persons or
property The person operating the washbasin is responsible for avoiding damage or
injury
• If the washbasin is used in publicly accessible locations where children or persons with
reduced observation capacity may get near it, the person operating the washbasin
must pay attention to those present in order to prevent dangerous situations
• Make sure that there is free space above and underneath the washbasin to allow
height adjustment
• Do not overload the washbasin and make sure that the load distribution is correct
• Do not operate the washbasin in case of defects or damage
• Modifications, which may influence the operation or construction of the washbasin, are
not allowed
• Installation, service and repairs should always be carried out by competent personnel
• During inspections, service or repairs load should be removed from the washbasin

Page 16
© ROPOX 2014
Service information
Fault finding
Resetting:
Press and hold the UP (▲) and DOWN (▼) buttons and keep them depressed until the
control unit has beeped approx ten times Now adjust the washbasin to the bottom
position for resetting
Problem Remedy
The washbasin does not
move up or down when the
control switch is pressed
Check whether
• 230V has been connected and current is available,
• the motor has been connected with the control
unit,
• the control switch has been connected with the
control unit,
• the motor is overloaded (note: 2 min operation, 2
min pause)
Control switch defective Check whether
• the height adjustment works with another control
switch
When pressing the UP and
DOWN buttons you only hear
”clicks” from the control unit,
the washbasin does not move
•
The plugs may not have been inserted correctly
• Dismount all cables from the control unit and insert
them again
• Resetting may be required
The washbasin seems
unstable
•
Tighten all screws of the pedestal, cf mounting
instructions
The washbasin cannot be
adjusted in height or height
adjustment is very difficult
•
Make sure that there are no objects preventing
height adjustment
It takes too long for the water
to leave the washbasin
Check the siphon for clogging-up and clean, if
required
Check that the flexible hose has not been fitted on the
wall at a height resulting in the formation of an extra
siphon, cf recommendations in “Installation interfaces”

Page 17
© ROPOX 2014
Service information
Maintenance
he pedestal of Ropox Support Washbasin Electric is maintenance-free. Moving parts
have been lubricated for life. For reasons of safety and reliability, we recommend a
performance test once a year.
Performance test
After one month
Check: Mixer tap
Connection of flexible hoses – water supply and drain
Once a year
Adjust the washbasin to top position and check that
• all bolts are securely tightened,
• the pedestal moves from bottom to top position without problems,
• water supply and drain hoses are undamaged and functional,
• Press the DOWN (▼) button, adjust the pedestal to bottom position and make sure
that the movement is smooth and even. See that the hose connections follow the
movement without getting jammed.
• Now press the UP (▲) button, adjust the pedestal to top position and make sure that
the movement is smooth and even. See that the hose connection follow the movement
without getting jammed.
After each performance test, complete the service schedule. See the following page.
Only use Ropox original spare parts as replacement parts. If other spare parts
are used, the guarantee may become void.
Performance tests, service and repairs must be carried out by competent
personnel

Page 18
© ROPOX 2014
Service information
Service schedule
Service and maintenance
Serial No.
Date:
Signature:
Comments:
Service and maintenance Serial No.
Date:
Signature:
Comments:
Service and maintenance Serial No.
Date:
Signature:
Comments:
Service and maintenance Serial No.
Date:
Signature:
Comments:
Service and maintenance Serial No.
Date:
Signature:
Comments:
Service and maintenance
Serial No.
Date:
Signature:
Comments:
Service and maintenance Serial No.
Date:
Signature:
Comments:
Service and maintenance
Serial No.
Date:
Signature:
Comments:

Page 19
© ROPOX 2014
CE marking
EU – Declaration of Conformity
I, the undersigned, hereby dec are that the fo owing products:
Ropox Support Washbasin E ectric
Item numbers: 40-44016, Ropox Support Washbasin E ectric ( eft)
40-44017, Ropox Support Washbasin E ectric (right)
conform to the fo owing Directives and Standards:
DIRECTIVESER
Medica Devices Directive No. 93/42/EEC (risk c ass 1)
Machinery Directive No. 2006/42/EC, amended by Directive No. 98/37/EC.
STANDARDS
DS/EN 1041: 2009 Information supp ied by the manufacturer of medica devices.
DS/EN 12182: 2012 : Assistive devices for persons with functiona disabi ities -
Genera requirements and test methods.
DS/EN 14971: 2012 : Medica devices – The use of risk management in connection with medica
devices.
DS/EN 60204-1 : Safety on machinery – E ectrica equipment of machines -
Part 1: Genera requirements.
DS/EN 60601-1 : Medica e ectrica equipment – Part 1: Genera requirements for basic
safety and essentia performance.
(Applying to the electrical components of the product).
DS/EN 9999: 2011: Assistive devices for persons with functiona disabi ities -
C assification and termino ogy.
Date: ___20-08-2014____
-
Better ways to better days
-

Page 20
© ROPOX 2014
Complaints
See General erms of Sale and Delivery on www.ropox.dk
ROPOX A/S
Ringstedgade 221
DK – 4700 Næstved
Tel.: [phone] Fax.: [phone]
E- ail: [email protected]
www.ropox.dk