Rosen Aviation SlimLine 1042 User manual

1042
1042
10.4 Model Number
DISPLAY
DISPLAY
SlimLine
9200-0102-835
Document # 9200-0102-835 Rev J Compliant to DO-160D
CORPORATE OFFICEOEM SALES DEALER & OPERATOR SALES
1020 Owen Loop South
Eugene, OR 97402
1-888-668-4955
Fax [phone]
8 Shackleford Plaza,
Suite 201
Little Rock, AR 72211
1-888-523-7523
Fax [phone]
1121 Warren Ave, Suite 240
Downers Grove, IL 60515
1-800-859-5058
Fax [phone]
www.
rosenaviation
.com
www.
rosenaviation
.com
FOR REFERENCE ONLY

1
Rosen Aviation
Table of Contents
Introduction and Display Overview ...................3
Pinouts .................................................................4
Installation............................................................4
Operation..............................................................5
Specifications......................................................8
DO-160D Test MatrixDO-160D Test Matrix..................9
Troubleshooting ................................................10
Disclaimer ..........................................................12

2
1020 Owen Loop South
Eugene OR 97402
541-342-3802
www.rosenaviation.com

3
Rosen Aviation
Introduction and Display Overview
Introduction and Display Overview
Welcome to the 1042 Technical Manual for the 10.4” LCD
monitor This manual provides information for the following:
• Pinouts
• Installation
• Operation
• Troubleshooting
• Specifications
The 1042 base model includes the following features:
• 10.4” Diagonal ViewingArea
• NTSC/PAL/SECAM/RS170 (Composite Video)
• 640 x 480 Screen Resolution (VGA )
• On Screen Display (OSD) Functions
• Status LED
• Front Panel Menu Operation
• 28 Volt or 12 Volt Operation per model number:
12 Volt: 1042-005
1042-110
28 Volt: 1042-001
1042-007
1042-010
1042-011
1042-020
1042-021
1042-120
1042-121
1042-229

4
10.4” LCD
Installation Guidelines
Pinouts and Installation Guidelines
To obtain pinout information, download our engineering
Outline & Installation drawing from www.rosenaviation.com.
Once you access the home page, click on Support &
Documentation, and then click on Technical Drawings
& Pinouts. Search options include searching by model
number or browsing by category.
Pinout descriptions are provided to assist in the wiring
process. Pay close attention to the pinout information while
completing wiring connections.
Pinouts and Installation Guidelines
Pinouts
To obtain product dimensions and/or rotation information,
download our engineering Outline & Installation drawing
from www.rosenaviation.com.
Once you access the home page, click on Support &
Documentation, and then click on Technical Drawings
& Pinouts. Search options include searching by model
number or browsing by category.
Drawings are provided to assist in the installation process.
Pay close attention to dimensions and rotations when
considering installation requirements.
Warning!
This Display is for Entertainment
Purposes Only! Connect to the Non-
Critical Power Bus.
Handling Warning!
Touching the LCD with excessive force
may leave pressure spots that show in
video display. Handle with care.

5
Rosen Aviation
Operation
Operation
Ensure that when plugging the
arm into the base receptacle,
the arm’s slot faces toward the
release button (as shown) and
the connection is not forced.

6
10.4” LCD
Operation
Operation (Cont)
Utilities :
User Setting : User Timeout : adjust the OSD menu timeout period in a step of 5 seconds
DPMS : Disable / Enable the DPMS function
Auto Source Select : Off - Disable auto source select function.
Low - Auto source select enable ONLY in power up.
High - Auto source select ALWAYS enable.
Gamma : 1.0 (Default setting)
1.6
2.2
OSD Setting : OSD Horz Position : move the OSD menu horizontally
OSD Vert Position : move the OSD menu vertically
OSD Background : Translucent / Opaque
OSD Rotate : Normal / Rotate
Freeze Frame : Freeze the image (use “+” button)
Zoom : Zoom level : enable the zoom in function on the image displayed.
Use “+” button to zoom in the image.
Us
e “-“ button to decrease the zoomed image.
Horizontal Pan :
Vertical Pan :
Direct Access #1: Define the hot key function (“+” and “-“) for one of the following
adjustments : Brightness / Contrast / Volume / Freeze / Zoom / Video Source* / PIP
Direct Access #2: Define the hot key function (“SEL UP” and “SEL DN“) for one of the following
adjustments : Brightness / Contrast / Volume / Freeze / Zoom / Video Source* / PIP
Display Orientation : Normal / Horizontal Inverse / Vertical Inverse / Inverse
Calibrate RGB Gain : Color Calibration (DISPLAYED IN PC MODE ONLY)
Load Factory Defaults : Recall factory default settings.
* By pressing the hot key, the source is in sequence of Analog RGB/Composite Video/S-
Video/Component Video.

7
Rosen Aviation
Operation (Cont)
Operation
Volume :
Adjust the audio volume level (functions only if the audio add-on installed)
Exit menu
(V1.00)
The OSD settings chosen will be stored in memory. The OSD menu can be cleared from the screen by moving the
selection bar to the EXIT icon pressing the + button otherwise it will automatically clear after a few seconds (time-out
period) of non-use.

8
10.4” LCD
Specications
Specifications
LCD Performance
Screen Resolution (pixels) 640 w x 480 h
Display Viewing Area 8.31 x 6.24 In
Viewing Angle ( At contrast ratio 10:1 )
Horizontal ±70º
Vertical 45º up 55º down
Contrast Ratio 300:1 (typical)
Backlight Lamp Life (hours) 50,000 hrs
Screen Brightness 350 cd/m2
Mechanical Packaging
Weight ( Monitor only) 5.75 lbs.(max)
Power Requirements 28VDC 700 mA Nominal
or
12V DC 1.2A Nominal
per model number (see page 3)
Video Performance
Video Standards NTSC, PAL, SECAM, RS-170
Video input 1V peak-to-peak, 75 Ohms
Operating Temperature 0ºC - 50ºC
Warranty 2yr

9
Rosen Aviation
10.4” Monitor DO-160D Test Matrix
Section Description Category
4 Temp & Alt A1
5 Temp Variation C
6 Humidity A
7 Op Shock & Crash Safety B
8 Vibration SB
9 Explosion Proofness X
10 Waterproofness X
11 Fluids Susceptibility X
12 Sand & Dust X
13 Fungus Resistance X
14 Salt Spray X
15 Magnetic Effect X
16 Power Input A
17 Voltage Spike B
18 AF Cond Suscept – Pwr A
19 Induced Signal Suscept Z
20 RF Suscept (Cond&Rad)
21 Emission of RF Energy M
22 Lightning Induced Trans X
23 Lightning Direct Effects X
24 Icing X
25 Electrostatic Discharge X
X= Not Tested
Technical Support
For field support or to order parts, contact Rosen Aviation
Displays at: 1-888-668-4955
or visit us at: www.rosenaviation.com
TTX
DO-160 Test Matrix

10
10.4” LCD
Troubleshooting
Screen is Black
Color Needs
Adjusting
Image is
Distorted
No Power
Screen is Blue
No Video
Red LED is on
•Verify that the pinout is correct
•Push and hold the power switch for about one
second
•Verify that the monitor is getting power and the
pinout is correct
•Verify that the video source is on and has a tape
or DVD installed
•Verify signal at monitor end. Use an oscilloscope
or another monitor
•Verify that the monitor is in the right mode setting
•Verify that the monitor is getting power and
the pinout is correct
•Verify that the video source is on and has a
tape or DVD installed
•Verify all connections
•Verify signal at monitor end. Use an
oscilloscope or another monitor
•Verify that the pinout is correct
•Verify that the video source is on and has a
tape or DVD installed
•This indicates that the monitor is powered
but is receiving no signal
•See the Operator’s Manual, pg 9 Menus
•Verify that the pinout is correct
•Verify that a signal is present and accurate
•Examine system for pinched or damaged cables
Notes •Always use an oscilloscope to verify video or
RGB signals
•Always use a multimeter to verify voltages
•Always check actual results against
requirements in the Operator’s Manual
PROBLEM POSSIBLE SOLUTION
Troubleshooting

11
Rosen Aviation

12
10.4” LCD
Disclaimer
All information, including illustrations, is believed to be reliable. Users and/or
installers, however, should independently evaluate the suitability of each
product for their application. Rosen makes no warranties as to the accuracy
or completeness of the information, and disclaims any liability regarding
its use or installation. Rosen’s only obligations are those in the Rosen
Standard Terms and Conditions of Sales for this product, and in no case will
Rosen be liable for any incidental, indirect or consequential damages arising
from the sale, resale, use or misuse of the product. Specifications are
subject to change without notice. Rosen reserves the right to make changes
- without notification to buyer - to materials or processing that do not affect
compliance with any applicable specifications.
Disclaimer