Rosewill SPECTRA D100 Instruction manual

Gaming Case
Quick User Guide

Table of Contents
Thank you for purchasing a Rosewill Computer Case.
Please read the instruction manual before use and
retain for future reference.
1
• Product Overview
Disassembly Chart ............................................. 02
Accessory Box ................................................... 03
• Installation Guide
1. Open the Unit ................................................ 04
2. Install Power Supply ...................................... 04
3. Install Motherboard ........................................ 05
4. Install Add-on Card ........................................ 05
5. Install 3.5”/2.5” HDD/SSD ............................. 06
6. Care ............................................................... 08
7. Options .......................................................... 09
• Specications Table ........................................... 12
Front I/O Cable Pinout ....................................... 13
Front I/O ............................................................. 13

2
SPECTRA D100
Gaming Case
Product Overview
Disassembly Chart (components vary by country)
Dimensions: 210 x 470 x 440 mm (W x D x H)
Front View Left Side View
210 mm
470 mm
440 mm
Dust Filter
Right Side Panel
Front Panel
Left Side Panel Hard Drive
Bracket
Dust Filter

3
SPECTRA D100
Gaming Case
Accessory Box
Image Part Name Qty Function/Component
Screw-A (6-32 x 6 mm) 8PSU
Add-on Card
Screw-B (M3 x 5 mm) 18 Motherboard
2.5” HDD/SSD
Screw-C (6-32 x 6 mm) 8 3.5” HDD
Standoff 6+3 Motherboard
(6 pre-installed)
PCI-e Slot Cover 2 PCI-e Slot
VGA Holder 1 Vertical VGA Installation
Cable Tie 5 Cable Management
Speaker 1 Motherboard

4
SPECTRA D100
Gaming Case
Installation Guide
1. Open the Unit
1-1. Remove the thumb screws and take off panels R and L (Figure 1).
1
2
2. Install Power Supply
2-1. Seat the power supply unit (PSU) at the bottom-rear of the case and secure with Screw-A (Figure 2).

5
SPECTRA D100
Gaming Case
3. Install Motherboard
3-1. Secure the motherboard down with Screw-B (Figure 3).
3
4. Install Add-on Card
4-1. Bend to remove the slot cover, then install the add-on card and secure with Screw-A (Figure 4).
4

6
SPECTRA D100
Gaming Case
5. Install 3.5”/2.5” HDD/SSD
5-1. Slide the trays out from drive cage (Figure 5a).
5a
5-2. Install SSD/HDD onto the trays and secure with Screw-B or C (Figure 5b).
5b

7
SPECTRA D100
Gaming Case
5c
5d
5-3. Insert the trays back into drive cage (Figure 5c).
5-4. Alternatively, you can also install 2.5” SSD directly onto the front of chassis, securing with
Screw-B (Figure 5d).

8
SPECTRA D100
Gaming Case
6
6. Care
To prevent damage, keep all panels closed and secured.
6-1. Put the side panels back in place and secure with thumb screws.
6-2. Clean the dust lters on top/bottom regularly to ensure adequate airow (Figure 6).