Rosewill SRM-01 User manual

SRM-01
Product Diagram
Front I/O Diagram
Accessory Kit
Install the Power Supply
Install the Motherboard
Install the Add-in Card
Install an External 5.25” Device
Install a 3.5”/2.5” Drive
Care
Options
Specifications
11
10
9
7
6
5
4
4
12
Open the Unit

Product Diagram
Front I/O Pinout
Panel L
Panel R
Bottom Dust Filter
Front Panel
SRM-01
80 mm Rear Fan

Front I/O Diagram
Accessory Kit
Figure Part’s Name FunctionQty
Screw-B
Screw-C
6
4
8
10
SRM-01
USB 2.0 HD Audio In / out Reset Button
USB 3.0
Power Button
M/B Standoff
Screw-A
Motherboard
Motherboard
Power Supply
5.25” Device
3.5”/2.5” HDD/SSD

Open the Unit
1-1. Untwist the thumbscrews and slide out panels R and L (Figure 1).
Install the Power Supply
2-1. Secure the power supply unit on the top of the case with Screw-A (Figure 2).
1
2
SRM-01

Install the Motherboard
3b
3a
SRM-01
3-1. Unscrew to release the HDD panel (Figure 3a).
3-2. Line up the standoffs with the screw holes on the motherboard (Figure 3b).

4a
3c
3-3. Screw the motherboard down with Screw-B (Figure 3c).
4. Install the Add-in Card
4-1. Unscrew to release the HDD panel (Figure 4a).
SRM-01

SRM-01
5a
4b
4-2. Install the add-in card and secure with the screws (Figure 4b).
5. Install an External 5.25” Device
5-1. Pull the front panel out and remove it (Figure 5a).

8
SRM-01
5c
5b
5-2. Insert the 5.25” drive and secure with screws (Figure 5b).
5-3. Install the front panel back onto the case (Figure 5c).