Rosewill RX81U-AT-25A User manual

2.5” SATA TO USB External Enclosure
RX81U-AT-25A
User Manual

User Manual
1
2.5” SATA TO USB External Enclosure RX81U-AT-25A
Include
z2.5” External Enclosure
zUSB Y-Cable
zCarry Pouch
zUser Manual
zScrew Pack
zScrew Driver
Hardware Installation Guide
STEP1: Pull out the rear panel. You will see the internal structure of the external enclosure.

User Manual 2.5” SATA TO USB External Enclosure RX81U-AT-25A
STEP2:
SATA HDD：Connect the HDD to the SATA connector. Make sure the connector is connected
well.
STEP3: Insert the HDD and PCB board to the aluminum case.
SATA HDD
2
STEP4: Screw the back cover firmly to the body case.
Please do unscrew on both side.

User Manual
3
2.5” SATA TO USB External Enclosure RX81U-AT-25A
STEP5: Screw the tray and external enclosure together.

User Manual
4
2.5” SATA TO USB External Enclosure RX81U-AT-25A
External Enclosure Driver Installation
HDD Formatting Guide
You may format your external HDD through USB2.0 connection.
Please make sure your external HDD is turned on and well connected to the PC before
formatting the HDD.
STEP1: Right-click “My Computer” icon and select the ”Manage” column.
STEP2: Select “Disk Management” and you will see your External HDD showed “Unallocated”.

User Manual
5
2.5” SATA TO USB External Enclosure RX81U-AT-25A
STEP3: Right-click on the “Unallocated” block and selects “New Partition”.
STEP4: The “New Partition Wizard” will appear. Please follow the instruction of the wizard to
complete.

User Manual
6
2.5” SATA TO USB External Enclosure RX81U-AT-25A
STEP5: When new partition is completed, the external HDD will be recognized as a “New
Volume”.
STEP6: Double-click “My Computer”. You will see the new volume appears on your PC.
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for complete warranty information and future support for your product.