Royalcraft Aruba 3 Piece Bistro Rocker Set User manual

Aruba 3 Piece Bistro Rocker Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 1 / 8

www.ro
y
alcraft.co.uk
Product size:
Coffee Table: L45*W45*H40 cm
Rocker: W65*D94*H79.5 cm
The frame of this product is manufactured from mild steel coated with a weather resistant paint.
Steel has a natural tendency to rust over time and, whilst we expect you to be able to enjoy your
furniture for many years to come, we recommend that you check the product from time to time for
signs of paint damage and/ or rust. If the paint should become damaged, or if rust begins to form,
you should clean the affected area and apply a suitable “thinners based” touch-up paint.
Such paints are readily available from all good hardware and DIY stores.”
This product is for Domestic Use only
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY

Aruba 3 Piece Bistro Rocker Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 2 / 8

www.ro
y
alcraft.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before
use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Do not stand or climb onto this product.
This product is intended for domestic use only.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Remove all packaging and banding and place the components
carefully on suitable surfaces to prevent damaging or scratching
them.
Check the pack and make sure you have all of the parts listed.
Check all screws and bolts are tightened and inspect regularly.
This product is suitable for all year outdoor use, but we
recommend that a furniture cover be used to add additional
protection to your product when not in use.
During severe weather conditions and in the winter months we
recommend moving your furniture inside into a cool, dry place.
Before storage, ensure that the product is clean and dry.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, dry cloth.
Cushions should be cleaned following the care instruction on the
label.
Don’ts
Do not use scourers, abrasives, washing powders, chemical cleaners
or any other substances containing abrasives since these substances
can damage the product, including the glass panel.
Never tilt the chair during use.
Do not place very hot or very cold items on the glass surface
unless adequately thick table-mats are used to prevent such
items from coming into contact with the glass.
Do not use the glass as a chopping surface. Do not strike glass
with hard or pointed items.
Do not strike the glass with hard or pointed items.
Do not use power tools to construct this product.
Do not use this product if parts are missing, damaged or worn.
Do not sit or lean on the table.
Do not stand or climb onto the product and do not use it as a ladder,
as this could lead to it unbalancing and overturning.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
Two people.
Time to assemble
40 minutes
Tools required


Tips:
Do NOT fully tighten bolts before
all components are connected.
Only fully tighten once you are
satisfied with the alignment of all
components.
Do not overtighten bolts.

Aruba 3 Piece Bistro Rocker Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 3 / 8

www.ro
y
alcraft.co.uk
This Set is a combination set of 3 pieces.
Please find the combination part.
Member Part
Combination
Part No. Diagram Name Qty
MP1
Table 1 PC
MP2
Rocker 2 PCS

Aruba 3 Piece Bistro Rocker Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 4 / 8

www.ro
y
alcraft.co.uk
Components, fixtures & fittings (not actual size)
Parts List
Part
No. Diagram Qty Part No. Diagram Qty
A
Table Top
1 PC B
Table Legs
4 PCS
C
Rocker Armrest/Leg
4 PCS D
Rocker Seat/Backrest
2 PCS
E
Rocker Connecting Bar
4 PCS F 4 PCS
G 
L‐ShapedTool
1 PC F1
Spanner
1 PC
N15
M6*15mm
32
PCS
N65
M6*65mm
12
PCS
N68
M6*68mm
8 PCS DP
D13/6.5mm Washer
56
PCS

Aruba 3 Piece Bistro Rocker Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 5 / 8

www.ro
y
alcraft.co.uk
F4
M6 Nut
4 PCS F10
M6 Bolt Head Cap
52
PCS
F6
M6 Nut Cap
4 PCS AK
Allen Key
2 PCS
Step by step assembly instructions
Note: All Bolt Head Caps and Nut Caps should not be attached before finally tightening all Bolts with
Spanner & Allen Key.
Only tighten all bolts when you are satisfied with the alignment of all components.

Aruba 3 Piece Bistro Rocker Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 6 / 8

www.ro
y
alcraft.co.uk
MP1 – Coffee Table
Step One
Place the Table Top (A) upside down
on a flat, non-abrasive surface to
avoid scratching the table surface or rim.
Step Two
Loosely attach the Table Legs (B) onto
the Table Top (A) using
Washers (DP) and Bolts (N15).
Once you are satisfied with
the alignment of all components,
carefully tighten all bolts using Allen Key (AK).
Do not over-tighten.
Cover each bolt with Bolt Head Cap (F10).
Turn over the assembled table.
Your Coffee Table is now ready for use. 

Aruba 3 Piece Bistro Rocker Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 7 / 8

www.ro
y
alcraft.co.uk
MP2 - Armchair
Step One
Assemble the Rocker Armrest/Legs (C) to the
Rocker Connecting Bars (E)
using Washers (DP), Bolts (N65),
Bolt Head Caps (F10), Nuts (F4) and Nut Caps (F6).
Step Two
Rear Part:
Assemble the Rocker Seat/Backrest (D) to the
Rocker Armrest/Legs (C)
using Washers (DP), Bolts (N68) and
Bolt Head Caps (F10).
Front Part:
Connect Rocker Seat/Backrest (D) to the
Connecting Bar and Rocker Armrest/Legs (C)
using Washers (DP), Bolts (N68) and
Bolt Head Caps (F10).

Aruba 3 Piece Bistro Rocker Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 8 / 8

www.ro
y
alcraft.co.uk
Step Three
Assemble the Part (F) to the
Rocker Seat/Backrest (D)
using Washers (DP), Bolts (N15), and
Bolt Head Caps (F10).
Step Four
Use L-Shaped Tool (G) to tighten the Part (F).
Your Rocker is now ready for use. 
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE