Royalcraft Milan User manual

Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 2 / 5
www.ro
y
alcraft.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure tofollow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before
use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Do not stand or climb onto this product.
This product is intended for domestic use only.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Removing all packaging and banding and place the components
carefullyon suitable surfacesto prevent damaging or scratching
them.
Check the pack and make sure you have all of the parts listed.
Check all screws and bolts are tightened and inspect regularly.
This product is suitable for all year outdoor use.
However to prolong its life we recommend that during severely
bad weather and during the winter months, it is stored in a cool,
dry place.
Before storage, ensure that the product is clean and dry.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, drycloth.
sponge and warm soapy water and wipe with a clean, dry cloth.
Don’ts
Do not use scourers, abrasives, washing powders, chemical
cleaners or any other substances containing abrasives since these
substances can damage the product, including the glass panel.
Do not place very hot or very cold items on the glass surface
unless adequately thick table-mats are used to prevent such
items from coming into contactwith the glass.
Do not use the glass as a chopping surface.
Do not strike the glass with hard or pointed items.
Do not use power tools to construct this product.
Do not use this product if parts are missing, damaged or worn.
Do not sit or lean on this product.
Do not stand or climb onto the product and do not use it as a
ladder, as this could lead to it unbalancing and overturning.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
Two people.
Time to assemble
10 Minutes
Tools required
Tips:
Do NOT fully tighten bolts before
all components are connected.
Only fullytighten once you are
satisfied with the alignment of all
components.
Do not over-tighten the bolts.
Milan 80 x 80cm Aluminium Table
Assembly Instructions

Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 3 / 5
www.ro
y
alcraft.co.uk
Components, fixtures & fittings (not actual size)
Parts List
Part
No. Diagram Qty. Part No. Diagram Qty.
A
Table Top
1 PC B
Table Leg
4 PCS
F2
Bolt Head Cap
12 PCS W25
M6*25mm Bolt
12 PCS
F3
Flat Washer
12 PCS S1 Spanner 1 PC
Milan 80 x 80cm Aluminium Table
Assembly Instructions

Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 4 / 5
www.ro
y
alcraft.co.uk
Step by step assembly instructions
All Bolt Head Caps should not be attached before finally tightening all Bolts with Spanner.
Step One
With the help of another person,
open the packaging,
place Table Top (A) upside down on a flat,
non-abrasive surface to
avoid scratching the table surface or rim.
Step Two
Loosely attach the Table Legs (B) to
the Table Top (B) using
Bolt Head Caps (F2), Bolts (W25),
and Flat Washers (F3).
Only tighten the bolts when
all bolts and washers are in place.
Once you are satisfied with
the alignment of the components
carefully tighten all bolts using Spanner (S1).
Do not over-tighten.
Cover each bolt with Bolt Head Cap (F2).
A
B
F2
W25
F3
Milan 80 x 80cm Aluminium Table
Assembly Instructions

Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 5 / 5
www.ro
y
alcraft.co.uk
Step Three
With the help of another person, carefully turn the table in the upright position. Level the table
by adjustable feet screw.
Your table is now ready for use.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Adjustable Foot Screw
Milan 80 x 80cm Aluminium Table
Assembly Instructions