Royalcraft Wilmslow 6 Seat Set User manual

Wilmslow 6 Seat Set –
Rectangular Table
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd.  1 / 5

www.ro
y
alcraft.co.uk
Product size:
L150*W90*H72 cm
The frame of this product is manufactured from mild steel coated with a weather resistant paint.
Steel has a natural tendency to rust over time and, whilst we expect you to be able to enjoy your
furniture for many years to come, we recommend that you check the product from time to time for
signs of paint damage and/ or rust. If the paint should become damaged, or if rust begins to form,
you should clean the affected area and apply a suitable “thinners based” touch-up paint.
Such paints are readily available from all good hardware and DIY stores.”
This product is for Domestic Use only!
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY

Wilmslow 6 Seat Set –
Rectangular Table
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd.  2 / 5

www.ro
y
alcraft.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before
use.
The product contains small parts which could
pose a risk to young children. Keep small parts
out of reach of children.
Do not stand or climb onto this product.
This product is intended for domestic use only.
Ensure the product is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
This table is not intended to support a parasol separately. A
parasol base with suitable weight must be used to support
your parasol.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on
suitable surface to prevent scratching your product.
Check the pack and make sure you have all of the parts listed.
Check all screws and bolts are tightened and inspect regularly.
We recommend the use of furniture covers to protect your product
when not in use.
During bad weather or in winter months, the product should be
stored in a cool, dry place. Before storage, ensure that the product
is clean and dry.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, dry cloth.
When cleaning glass panels use a damp cloth or leather with
washing up liquid or soft soap if necessary.
Never use scourers, abrasives or chemical cleaner.
Never use a pressure hose or washer to clean the product.
A competent person should carry out assembly. No liability will be
accepted for damage or injury caused by incorrectly installed or
assembled furniture.
Don’ts
Do not stand or climb onto the product.
Do not use power tools to construct this product.
Do not sit or lean onto the rims of this product.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaner.
Do not use this product as a ladder as this could lead to the
product becoming unbalanced and overturning.
Do not place very hot or very cold items directly on the
glass surfaces unless adequately thick table-mats are used to
prevent such items from coming into contact with the glass.
Do not use the glass as a chopping surface.
Do not strike glass with hard or pointed items.
Do not use washing powders or any other substances containing
abrasives since these substances scratch the glass.
Dot use this product if the glass is chipped or broken.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
Two people
Time to assemble
30 minutes
Tools required

Wilmslow 6 Seat Set –
Rectangular Table
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd.  3 / 5

www.ro
y
alcraft.co.uk
Components, fixtures & fittings (not actual size)
Parts List
Part
No. Diagram Qty. Part No. Diagram Qty.
A
Table Top
1 PC B
Support
2 PCS
C
Leg
4 PCS D
Connecting Ring
1 PC
E
Bolt Head Cap
12 PCS F
M6*25mm Bolt
12 PCS
G
Washer
12 PCS H 
M4*10mm
Self-Taping Screw
2 PCS
I 
Spanner
1 PC

Wilmslow 6 Seat Set –
Rectangular Table
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd.  4 / 5

www.ro
y
alcraft.co.uk
Step by step assembly instructions
Note: Tighten only enough to hold parts in place. Do not tighten completely during assembly.
Some adjustments may be necessary to ensure all parts are aligned properly.
Only tighten the bolts when all bolts and washers are in place. All Bolt Head Caps and Nut Caps
should not be attached before finally tightening all Bolts with Spanner.
Step One
With the help of another person, place the Table Top (A) upside down on a flat, non-abrasive
surface to avoid scratching the table surface or rim.
Step Two
Locate the assembly position on the bottom side of the Table Top (A).
Attach the Support (B) and Table Legs (C) onto the assembly position (pre-fitted plastic
socket).

Wilmslow 6 Seat Set –
Rectangular Table
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd.  5 / 5

www.ro
y
alcraft.co.uk
Step Three
Place the Connecting Ring (D) onto the Supports (B) and Table Legs (C), using Bolt Head
Caps (E), Bolts (F) and Washers (G).
Fasten the Self-Taping screw (H) through the guided holes in Support (B).
Once you are satisfied with the alignment of the components, carefully tighten all bolts using
Spanner (I). Do not over-tighten.
Step Four
With the help of another person, carefully turn over the table and place it in the upright position.
Your table is now ready for use.
Note: When using a parasol with this table always use a suitable base weight.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE