Royalcraft Capri 3 Piece Compact Dining Set User manual

Capri 3 Piece Compact Dining Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 1 / 9

www.ro
y
alcraft.co.uk
Product size:
Table: L98*W58*H72 cm
Armchair: W60*D52*H84.5 cm
The frame of this product is manufactured from mild steel coated with a weather resistant paint.
Steel has a natural tendency to rust over time and, whilst we expect you to be able to enjoy your
furniture for many years to come, we recommend that you check the product from time to time for
signs of paint damage and/ or rust. If the paint should become damaged, or if rust begins to form,
you should clean the affected area and apply a suitable “thinners based” touch-up paint.
Such paints are readily available from all good hardware and DIY stores.”
This product is for Domestic Use only
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY

Capri 3 Piece Compact Dining Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 2 / 9

www.ro
y
alcraft.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before
use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Do not stand or climb onto this product.
This product is intended for domestic use only.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Remove all packaging and banding and place the components
carefully on suitable surfaces to prevent damaging or scratching
them.
Check the pack and make sure you have all of the parts listed.
Check all screws and bolts are tightened and inspect regularly.
This product is suitable for all year outdoor use, but we
recommend that a furniture cover be used to add additional
protection to your product when not in use.
During severe weather conditions and in the winter months we
recommend moving your furniture inside into a cool, dry place.
Before storage, ensure that the product is clean and dry.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, dry cloth.
Cushions should be cleaned following the care instruction on the
label.
Don’ts
Do not use scourers, abrasives, washing powders, chemical cleaners
or any other substances containing abrasives since these substances
can damage the product, including the glass panel.
Never tilt the chair during use.
Do not place very hot or very cold items on the glass surface
unless adequately thick table-mats are used to prevent such
items from coming into contact with the glass.
Do not use the glass as a chopping surface. Do not strike glass
with hard or pointed items.
Do not strike the glass with hard or pointed items.
Do not use power tools to construct this product.
Do not use this product if parts are missing, damaged or worn.
Do not sit or lean on the table.
Do not stand or climb onto the product and do not use it as a ladder,
as this could lead to it unbalancing and overturning.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
Two people.
Time to assemble
40 minutes
Tools required


Tips:
Do NOT fully tighten bolts before
all components are connected.
Only fully tighten once you are
satisfied with the alignment of all
components.
Do not overtighten bolts.

Capri 3 Piece Compact Dining Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 3 / 9

www.ro
y
alcraft.co.uk
This Set is a combination set of 3 pieces.
Please find the combination part.
Member Part
Combination
Part No. Diagram Name Qty
MP1
Table 1 PC
MP2
Armchair 2 PCS

Capri 3 Piece Compact Dining Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 4 / 9

www.ro
y
alcraft.co.uk
Components, fixtures & fittings (not actual size)
Parts List
Part
No. Diagram Qty. Part No. Diagram Qty.
A
Table Top Frame
1 PC B
Table Legs
2 PCS
C
Cross Support
1 PC D
Glass Top
1 PC
E
Backrest/Rear Leg
2 PCS F
Armrest/Front Leg
4 PCS
G
Armchair Seating Part
2 PCS F1
Spanner
1 PC
N12
M6*12mm
4 PCS N30
M6*30mm
4 PCS
N40
M6*40mm
20
PCS
DP
D13/6.5mm Washer
36
PCS

Capri 3 Piece Compact Dining Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 5 / 9

www.ro
y
alcraft.co.uk
F4
M6 Nut
8 PCS F10
M6 Bolt Head Cap
28
PCS
F6
M6 Nut Cap
8 PCS AK
Allen Key
1 PC
Step by step assembly instructions
Note: All Bolt Head Caps and Nut Caps should not be attached before finally tightening all Bolts with
Spanner & Allen Key.
Only tighten all bolts when you are satisfied with the alignment of all components.

Capri 3 Piece Compact Dining Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 6 / 9

www.ro
y
alcraft.co.uk
MP1 - Table
Step One
Open the packaging, leave the glass on the carton
until the rest of the table is fully assembled.
With the help of another person,
place the Table Top Frame (A) upside down
on a flat, non-abrasive surface to
avoid scratching the table surface or rim.
Step Two
Do NOT assemble the Table Legs (B) to
the Table Top Frame (A) while it is still
resting on the Glass Top (D).
Place the Table Legs (B) onto
the Table Top Frame (A),
aligning all holes in each part.
Loosely attach the Table Legs
to the Table Top Frame using
Washers (DP) and Bolts (N30).

Capri 3 Piece Compact Dining Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 7 / 9

www.ro
y
alcraft.co.uk
Step Three
Connect the Cross Support (C) to the Table Legs (B) using Washers (DP) and Bolts (N12).
Once you are satisfied with
the alignment of all components,
carefully tighten all bolts using Allen Key (AK).
Do not over-tighten.
Cover each bolt with Bolt Head Cap (F10).
Step Four
With the help of another person, carefully
turn the table frame in the upright position.
Level the table with adjustable feet screws.
Carefully place the Glass Top (D) on the
Table Top Frame (A) and make sure the
Glass Top (D) is fully rested on/in the frame.
Your Table is now ready for use. 







Capri 3 Piece Compact Dining Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 8 / 9

www.ro
y
alcraft.co.uk
MP2 - Armchair
Step One
Assemble the Armchair Seating Part (G) to the
Backrest/Rear Legs (E)
using Washers (DP), Bolts (N40),
Bolt Head Caps (F10), Nuts (F4) and Nut Caps (F6).
Step Two
Assemble the Armrest/Front Legs (F) to the
Backrest/Rear Legs (E)
using Washers (DP), Bolts (N40),
and Bolt Head Caps (F10).

Capri 3 Piece Compact Dining Set
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 9 / 9

www.ro
y
alcraft.co.uk
Step Three
Assemble the Armrest/Front Legs (F) to the
Armchair Seating Part (G)
using Washers (DP), Bolts (N40),
Bolt Head Caps (F10), Nuts (F4) and Nut Caps (F6).
Once you are satisfied with
the alignment of all components,
carefully tighten all bolts using Allen Key (AK) and
Spanner (F1) before attaching Bolt Head Caps (F10)
and Nut Caps (F6).
Do not over-tighten.
Your Armchair is now ready for use. 
Never tilt the Armchair during use.
Ensure the product is always placed firmly
on the ground.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE