Royalcraft Lisbon User manual

Product size:
W155*D92*H80cm
The intended use of this product is for domestic use only.
Important, please retain for future reference.
Read carefully.
www.royalcraft.co.uk

A Mir Co., Ltd. 1 / 6

ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 2 / 6
www.ro
y
alcraft.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
This product should only be used on firm, level ground.
Do not stand or climb onto this product.
This product is intended for domestic use only.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Dos
When you are ready to start, make sure that you have plenty of
space and a clean, dry area for assembly.
Remove all packaging and banding and place the components
carefully on suitable surfaces to prevent damaging or scratching
them.
Check the pack and make sure you have all parts listed.
We recommend the use of furniture covers to protect your product
when not in use.
This product is suitable for outdoor use in sunny days. Cushions
should not be left out in wet weather or overnight.
To prolong the life of the product we recommend that during
severely bad weather and during the winter months, it is stored in
a cool, dry place.
Before storage, ensure that the product is clean and dry.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, dry cloth.
Don’ts
Do not use scourers, abrasives, washing powders, chemical cleaners
or any other substances containing abrasives since these substances
can damage the product.
Never use the cushion box as a
bench.
Do not use this product if parts are missing, damaged or worn.
Do not stand or climb onto the product and do not use it as a ladder,
as this could lead to it unbalancing and overturning.
Never drag furniture when moving it, always lift it.
Children are not allowed to use this
Cushion Box alone unless there is
adult at present.
Number of people required for assembly
Two people
Time to assemble
50 Minutes
Tools required
Tips:
Do NOT fully tighten bolts before
all components are connected.
Only fully tighten once you are
satisfied with the alignment of all
components.
Do not overtighten the bolts.
Lisbon Cushion Storage Box
Assembly Instructions

ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 3 / 6
www.ro
y
alcraft.co.uk
Components, fixtures & fittings (not actual size)
Parts List
Part
No. Diagram Qty. Part
No. Diagram Qty.
A
Front Panel
1 PC B
Back Panel
1 PC
C
Side Panel
2 PCS D
Bottom
Panel
1 PC
E
Lid
1 PC F
Pump
2 PCS
G
Lining
1 PC H
Washer
24
PCS
Lisbon Cushion Storage Box
Assembly Instructions

ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 4 / 6
www.ro
y
alcraft.co.uk
I
Bolt Head
Cap
21 PCS J
Nut
3 PCS
K
M6*45mm
18 PCS L
M6*35mm
3 PCS
M
Allen Key
1 PC N
Spanner
1 PC
Step by step assembly instructions
Step One
Assemble the Front Panel (A) and Back Panel (B) to
the Side Panels (C) using Washers (H),
Bolts (K) and Bolt Head Caps (I).
NOTE:
Do not fully tighten any of the bolts until
all bolts are in place and aligned.
Lisbon Cushion Storage Box
Assembly Instructions

ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 6 / 6
www.ro
y
alcraft.co.uk
Step Four
Assemble the Pumps (F) to the Side Panels (C) and
Lid (E).
Attach the Lining (G) to the Cushion Box.
Your Cushion Box is now ready for use.
Be careful and don’t pinch your fingers.
Always be careful when close the lid.
Drop down the lid slowly.
Children and Kids should NOT use this box.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Lisbon Cushion Storage Box
Assembly Instructions