Royalcraft Versailles 124cm Table User manual

Versailles 124cm Table
Assembly Instructions
ProducedinChinaforAMir&Co.,Ltd.
© A Mir & Co., Ltd. 2015 1 / 6

www.a-mir.co.uk
Product size:
D124* H71.5cm
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY

Versailles 124cm Table
Assembly Instructions
ProducedinChinaforAMir&Co.,Ltd.
© A Mir & Co., Ltd. 2015 2 / 6

www.a-mir.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before
use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Do not stand or climb onto this product.
This product is intended for domestic use only.
Ensure the table is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
This table is not designed to hold a parasol separately. A
parasol base with suitable weight should be always used to
support your parasol.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on
suitable surface to prevent scratching your product.
Check the pack and make sure you have all of the parts listed.
Check if all screws and bolts are tightened and inspect regularly.
We recommend the use of furniture covers to protect your product
when not in use.
During bad weather or in winter months, the product should be
stored in a cool, dry place. Before storage, ensure that the product
is clean and dry.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, dry cloth.
Don’ts
Do not stand or climb onto the product.
Do not use power tools to construct this product.
Do not sit or lean onto the rims of this product.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaner.
Do not use this table as a ladder as this could lead to the
table becoming unbalanced and overturning.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
Two people.
Time to assemble
30 minutes
Tools required




Versailles 124cm Table
Assembly Instructions
ProducedinChinaforAMir&Co.,Ltd.
© A Mir & Co., Ltd. 2015 3 / 6

www.a-mir.co.uk
CLEANING & CARE INSTRUCTIONS FOR CAST ALUMINUM FURNITURE
Cleaning Cast Aluminum Furniture
With simple, regular maintenance and care, cast aluminum patio furniture will provide years of enjoyment.
We recommend cleaning the product at least once a season. Occasional cleaning with mild soap and water, followed by rinsing and a
thorough drying with a towel is typically all that is required.
In a garden environment the atmosphere contains many impurities, which over time can create a layer of dirt on the furniture.
You should avoid allowing dirt to build up on the metal frames, as this may cause it to become more difficult to remove over time.
Should such a build-up occur, then a non- abrasive sponge or soft brush can be used with lukewarm water to clean the surface of the product.
Do not use any abrasive materials, cleansers or bleach products as these may damage the finish.
If you notice calcium build-up on your cast aluminum furniture, you can try using a solution of 1 part white distilled vinegar and 9 part water to
help remove it. Before you apply your solution, you should always test the solution on an inconspicuous area of the frame before applying to
ensure it doesn't discolor the finish.
If your cast aluminum furniture has a shiny or glossy, non-textured finish, you may also use a fine automotive wax to maintain it. This will help
in reducing the amount of dirt and debris that accumulates on the frame finish.
On furniture textured surfaces or finishes, you can periodically apply mineral oil or baby oil to prevent dirt build-up and restore the luster.
Preventative Maintenance for Cast Aluminum Furniture
Periodically, you should inspect your cast aluminum furniture for any scratches or chips in the finish. If you should find any areas where the
bare metal is exposed, you should contact your furniture manufacturer or retailer for information about how to repair it. Depending on the size
of the area, you may be able to use touch-up paint to correct the problem. Touch-up paint in matching frame colors is typically available
through your retail dealer or furniture manufacturer.
Additionally, you should prevent water from accumulating in frame by removing the adjuster glides or foot caps from the bottom of the legs.
Allowing water to collect inside cast aluminum furniture that is exposed to freezing temperatures can cause damage to the frame that is
typically not covered under a manufacturer's warranty.
To keep your cast aluminum furniture looking its best, you may wish to store or cover your furniture when not in use for an extended period of
time.

Versailles 124cm Table
Assembly Instructions
Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 2015 4 / 6
www.a-mir.co.uk
Components, fixtures & fittings (not actual size)
Parts List
Part
No.
Diagram Qty
Part
No.
Diagram Qty
A
1 PC B
4 PCS
C
1 PC D
M6*25mm
8 PCS
E
M6*40mm
4 PCS F 12 PCS
G
12 PCS H
1 PC
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
0

Versailles 124cm Table
Assembly Instructions
ProducedinChinaforAMir&Co.,Ltd.
© A Mir & Co., Ltd. 2015 5 / 6

www.a-mir.co.uk
Step by step assembly instructions
Step One
With the help of another person, place Table Top (A) upside down on a flat, non-abrasive
surface to avoid scratching the table surface or rim.
Step Two
Locate the assembly position on the bottom side of the Table Top (A).
Attach the Table Legs (B) onto the assembly position, aligning holes in each part.
Loosely attach the Table Legs to the Table Top using Flat Washers (F) and Bolts (E).

Versailles 124cm Table
Assembly Instructions
ProducedinChinaforAMir&Co.,Ltd.
© A Mir & Co., Ltd. 2015 6 / 6

www.a-mir.co.uk
Step Three
Loosely attach the Connecting Ring (C) onto the Table Legs (B), aligning all holes in each part,
using Flat Washers (F) and Bolts (D).
Only tighten the bolts when all bolts and washers are in place and turn freely.
Once you are satisfied with the alignment of the components, carefully tighten all bolts using
Socket Wrench (H). Do not over-tighten.
Cover each bolt with Bolt End Cap (G).
Step Four
With the help of another person, carefully turn over the table and place it in the upright position.
Your table is now ready for use.

Note: This table is not designed to hold a parasol separately.
A parasol base with suitable weight should always be used.
