Royalcraft Maya Bistro Set User manual

Maya Bistro Set
Assembly Instructions
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd.  1 / 6

www.ro
y
alcraft.co.uk
Product size:
Dia46*H52cm (Coffee Table)
W41*D46*H80cm (Chair)
The frame of this product is manufactured from mild steel coated with a weather resistant
paint. Steel has a natural tendency to rust over time and, whilst we expect you to be able to
enjoy your furniture for many years to come, we recommend that you check the product from
time to time for signs of paint damage and/ or rust. If the paint should become damaged, or if
rust begins to form, you should clean the affected area and apply a suitable “thinners based”
touch-up paint. Such paints are readily available for all good hardware and DIY stores.”
This product is for Domestic Use only!
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY

Maya Bistro Set
Assembly Instructions
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd.  2 / 6

www.ro
y
alcraft.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before
use.
This product should only be used on firm, level ground.
This product is intended for domestic use only.
Keep small parts out of reach of children.
Ensure the product is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
As with all articulated furniture, please exercise care when folding,
unfolding or adjusting positions to avoid any possibility of pinching
or trapping fingers.
Take care when opening and folding the furniture. Keep your
hands away from moving parts in order to prevent trapping your
fingers. Children should not open or close the furniture.
Please take care when handling or moving the product as careless
handling may cause damage or injury.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on
suitable surface to prevent scratching your product.
Check the pack and make sure you have all of the parts listed.
Wash the frame with a mild soap and water only. Rinse and dry
thoroughly.
To extend the product life and appearance it is advisable to store
the furniture in a cool dry place over winter.
Ensure that the furniture is clean and completely dry before putting
in to storage.
In the event of the surface paint chipping or scratching, the easiest
way to treat the problem is to treat with a spray paint/aerosol
lacquer spray, equivalent to the colour of the furniture. This will
prevent the metal from being exposed, preventing it from further
deterioration.
Don’ts
Do not use a metal brush when removing dirt from this item, as it will
strip the paint off leaving the surface open to corrosion.
Do NOT use the table as a chopping surface. Do not strike the table
with hard or pointed items.
Do NOT place very hot or very cold items on the table surface(s)
unless adequately thick tablemats are used to prevent such items
from coming into contact with the table.
Do NOT enclose the product in a plastic or other non-permeable
material as this creates moisture.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaner.
Never drag furniture when moving it, always lift it.
Do NOT sit or stand upon the table surface(s).
Do NOT use the chair as a ladder.
Do NOT stand on the seat of the chair.
Do NOT climb on the chair.
Never tilt the chair. Ensure the chair is always placed firmly
on a solid level surface.
Tools required
THIS BISTRO SET REQUIRES NO
ASSEMBLY TOOLS

Maya Bistro Set
Assembly Instructions
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd.  3 / 6

www.royalcraft.co.uk
Member Part
Part No. Diagram Name Qty.
A
Coffee Table 1 PC
B
Chair 2 PCS

Maya Bistro Set
Assembly Instructions
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd.  4 / 6

www.royalcraft.co.uk
Components, fixtures & fittings (not actual size)
Coffee Table Parts List
Part
No. Diagram Qty. Part No. Diagram Qty.
A
Table Top
1 PC B
Legs
1 PC
Please note the diagram is for reference only, it may not fully represent the
actual appearance of the parts.

Maya Bistro Set
Assembly Instructions
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd.  5 / 6

www.royalcraft.co.uk
Step by step use instructions
Setting up the Table
1. Unfold the Legs and stand it evenly, please note the legs bottom and top difference.
2. Place the Table Top (A) onto the legs top. Your coffee table is now ready for us!
Note: Due to special design, please always be careful when you intend to move the coffee table.
Warning
As with all articulated furniture, please take care when opening and
closing to avoid the possibility of pinching or trapping fingers.

Maya Bistro Set
Assembly Instructions
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd.  6 / 6

www.royalcraft.co.uk
Opening and Closing the Chair
1. To unfold the chair, lower the back edge of the seat and open out the chair legs until the
seat is horizontal;
2. Place the chair on a flat level surface;
3. Attach the safety lock; your chair is now ready for use.
4. The chair is folded by reversing the above steps.
Note: Make sure the safety lock is released before folding to avoid damaging the chair.
Never tilt the Chair during use.
Ensure the product is always placed firmly
on the ground.
During use, please don’t use your finger to touch
any articulated parts to avoid injury.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Safet
y
Lock