Royalcraft Tilt Back Lounger User manual

Tilt Back Lounger
Assembly Instructions
ProducedinChinaforAMir&Co.,Ltd.
© A Mir & Co., Ltd.  1 / 3

www.a-mir.co.uk
Product size:
L170*W60*H75/102 cm
The frame of this product is manufactured from mild steel coated with a weather resistant paint.
Steel has a natural tendency to rust over time and, whilst we expect you to be able to enjoy your
furniture for many years to come, we recommend that you check the product from time to time for
signs of paint damage and/ or rust. If the paint should become damaged, or if rust begins to form,
you should clean the affected area and apply a suitable “thinners based” touch-up paint.
Such paints are readily available from all good hardware and DIY stores.”
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY

Tilt Back Lounger
Assembly Instructions
ProducedinChinaforAMir&Co.,Ltd.
© A Mir & Co., Ltd.  2 / 3

www.a-mir.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before
use.
The product contains small parts which could
pose a risk to young children. Keep small parts
out of reach of children.
Do not stand or climb onto this product.
This product is intended for Camping Use only.
Ensure the product is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on
suitable surface to prevent scratching your product.
Check the pack and make sure you have all of the parts listed.
Check all screws and bolts are tightened and inspect regularly.
We recommend the use of furniture covers to protect your product
when not in use.
During bad weather or in winter months, the product should be
stored in a cool, dry place. Before storage, ensure that the product
is clean and dry.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, dry cloth.
Never use scourers, abrasives or chemical cleaner.
Don’ts
Do not stand or climb onto the product.
Do not use power tools to construct this product.
Do not sit or lean onto the rims of this product.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaner.
Do not use this product as a ladder as this could lead to the
product becoming unbalanced and overturning.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
One Person
Time to assemble
No assembly required
Tools required
Noneed














Never use a pressure hose or washer to clean the product.

Tilt Back Lounger
Assembly Instructions
ProducedinChinaforAMir&Co.,Ltd.
© A Mir & Co., Ltd.  3 / 3

www.a-mir.co.uk
Usage Steps
To unfold the Lounger, lower the front edge of the seat and open out the legs until the two legs
stand firmly on the ground;
 
To fold the Lounger, lift the front edge of the seat and fold the legs until the two legs are close
to each other.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Warning
As with all articulated furniture, please take care when opening and
closing to avoid the possibility of pinching or trapping fingers.