Royalcraft Amalfi AMAIVY-02 User manual

Product size: L 140*W80*H70 cm
-
a 
 a  
   
     
 a 
 
The intended use of this product is for domestic use only.
Important, please retain for future reference.
  
  
Read carefully.
www.royalcraft.co.uk
 / 

Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 2 / 5
www.ro
y
alcraft.co.uk
Before you start
Two people
Time to assemble
30 Minutes
Tools required
Tips:
Do NOT fully tighten bolts before
all components are connected.
Only fullytighten once you are
satisfied with the alignment of all
components.
Do not over-tighten the bolts.
Amalfi Ivory 6 Seater Table
Assembly Instructions
Warnings
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on a
suitable surface to prevent scratching your product.
Check all contents are present prior to assembly as per the parts
list provided. In the event of problems or missing parts, please
contact the seller.
Check all screws and bolts are tightened and inspect regularly.
Cover furniture when not in use to add additional protection to your
product.
During severe weather conditions, including high winds, rain, hail,
thunderstorms, extreme heat and cold temperatures, the product
should be stored inside in a cool, dry place.
To best preserve this product, please use a protective cover when
your furniture is not in use. We would also recommend using a
gazebo or parasol over your furniture during the summer period
and prolonged sunny spells. This will help prevent harmful UV rays
from damaging and discolouring the material.
Ensure that the product is clean and dry before storage.
Clean your product with a sponge and warm soapy water then wipe
with a clean, dry cloth.
When cleaning glass panels use a damp cloth or leather with
washing up liquid or soft soap if necessary
Where instructions as to the; storage, commissioning, installation,
use and maintenance of the goods or (if there is none) good trade
practice are not followed and a defect arises this will void the
12 month manufacturer's guarantee on the product.
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
This product is intended for domestic use only.
Ensure the product is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Don’ts
Do not use scourers, abrasives, washing powders, chemical
cleaners or any other substances containing abrasives since
these substances can damage the product, including the glass
panel.
To preserve the table top design do not place greasy / oily items
directly onto the surface. Use place-mats to prevent spillages
of food or drink.
Do not place very hot or very cold items on the glass surface
unless adequately thick table-mats are used to prevent such
items from coming into contact with the glass.
Do not use the table as a chopping surface.
Do not strike the table with hard or pointed items.
Do not sit or lean on the table.
Do not use power tools to construct this product.
Do not use this product if parts are missing, damaged or worn.
Do not stand or climb onto the product and do not use it as a
ladder, as this could lead to it unbalancing and overturning.
Never drag furniture when moving it, always lift it.
Number of people required for assembly

Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 3 / 5
Components, fixtures & fittings (not actual size)
Parts List
Part
No. Diagram Qty. Part No. Diagram Qty.
A
Table Top
1 PC B
Table Leg
4 PCS
C
Connecting Ring
1 PC D
E
Bolt Head Cap
8 PCS F
M6*55mm B
M6*32mm Bolt
olt
4 PCS
4 PCS
G
Washer
8 PCS H
Nut
8 PCS
I
Nut Cap
8 PCS J Parasol Hole Cap
(Pre-Assembled)
1 PC
K
Allen Key
1 PC L
Spanner
1 PC
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
0
www.royalcraft.co.uk
Amalfi Ivory 6 Seater Table
Assembly Instructions

Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 4 / 5
www.ro
y
alcraft.co.uk
Step by step assembly instructions
Note: Tighten only enough to hold parts in place. Do not tighten completely during assembly.
Some adjustments may be necessary to ensure all parts are aligned properly.
Only tighten the bolts when all bolts and washers are in place.
Step One
With the help of another person, place
Table Top (A) upside down on a flat,
non-abrasive surface to avoid scratching
the table surface or rim.
Locate the assembly position on
the bottom side of the Table Top (A).
It is a plastic socket.
Attach the Table Legs (B)
onto the assembly position.
Step Two
Place the Connecting Ring(C) onto the Table Legs (B), using Bolt Head Caps (E), Bolts (D&F),
Flat Washers (G), Nuts (H) and Nut Caps (I).
Once you are satisfied with the alignment of the components, carefully tighten all bolts using
Allen Key (K) and Spanner (L). Do not over-tighten. Cover each bolt with Bolt Head Cap (E).
B
A
B
A
CKE
I
LHG D
KE
I
LHG F
Amalfi Ivory 6 Seater Table
Assembly Instructions

Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 5 / 5
www.ro
y
alcraft.co.uk
Step Three
With the help of another person, carefully turn over the table and place it in the upright
position. Make sure there is no wobbling when the table is placed on the flat ground.
Your table is now ready for use.
Note: When using a parasol with this table always use a suitable base weight.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Amalfi Ivory 6 Seater Table
Assembly Instructions