RSA Lighting CDM6NCMH User manual

DESCRIPTION Catalog # Type
Project
Comments Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
17.50"
6.50"
11.50"
6.50"
7.50"
C
A
B
E
D
A...Housing
Housing and plaster frame: 18 gauge CRS.
Housing is powder coated white. Housing
adjusts in plasterframe to acccommodate
1/2” to 1-1/4” ceiling thickness. Housing
includes slots for trim torsion spring
retainers.
B ...System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture.
C ...Electrical
Integral j-box and electronic metal halide
ballast. 120V or 277V input. Junction box
is U.L. listed for through branch wiring.
Includes five 1/2 trade size knockouts.
D...Lamp
Quick-connect wire connector attached
to ballast for connection to Versa Metal
Halide trims. Trims have quick-connector
wired to lamp socket. For use with Metal
Halide lamps only.
E ...Mounting
Adjustable Butterfly Brackets included
for commercial applications.
F....Labels
UL Listed, cUL Lited Damp Location
Ceiling Cut-Out: 6.75”
VERSA
6” RECESSED
HOUSING
CDM6NCMH
New Construction
w/ Integral Metal
Halide Ballast
For 20W, 39W or 70W
metal halide trims
ORDERING INFORMATION
Housing
CDM6NCMH =
Versa 6” New Construction
Housing w/ Integral Metal
Halide Ballast
New construction housing for Versa Metal Halide Adjustable and Accent
trims (CDMA-T4, CDMA-P2, CDMC-C1, CDMC-P3).
For new construction applications. Insulation must be kept 3” from all
sides and at least 1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]
Lamp Wattage
20 =20 watt metal halide
39 =39 watt metal halide
70 =70 watt metal halide
CDM6NCMH
rev 072706
Voltage
120 =120 volts primary
277 =277 volts primary