RSA Lighting LYNX LX3001MH User manual

DESCRIPTION Catalog # Type
Project
Comments Date
Prepared by
www.cooperlighting.com
SPECIFICATION FEATURES
18.00”
Flexible Conduit
3.50” dia.
1.75” dia.
A
B
C
E
4.75”
8.90”
2.00”
D
A...Housing
All aluminum construction with 18” of
flexible conduit attached to a cylindrical
ballast/wiring enclosure. Swing out
mounting clips form pressure fit for
mounting in 1/2” - 3/4” drywall.
B ...Trim:
3.5” o.d. round trim with regressed black
baffle. Finished in white, black, industrial
silver, stainless steel (painted), and cus-
tom colors.
C ...System Protection:
Thermal protection inside housing.
Vent holes in housing provide cooler
operation. All aluminum construction
provides overall reduced temperatures.
D...Electrical
Electronic metal halide ballast housed
in a separate metal enclosure.
Enclosure includes a separated wiring
compartment and entry for primary
leads.
E ...Lamp
CMHMR16 Metal Halide in 20 watts. (not
included). GX10 twist-lock lamp socket for
firm, mechanical lamp connection. Can
accept up to two (2) optical accessories.
Ceiling Cut-Out: 3.19” dia.
LYNX
LX3001MH
Miniature Round
Trim w/ Regress
Black Baffle
Cylindrical Housing
Ballast/Wiring
Enclosure
CMHMR16 Metal Halide 20 watts
ORDERING INFORMATION
Fixture
LX3001MH
Regressed Black Baffle Lynx
Trim with Housing & Ballast
Enclosure
Miniature cylindrical recessed housing and round trim with regressed
black baffle. Includes enclosure with integral electronic metal halide ballast
and wiring compartment.
For new construction or remodel applications. Insulation must be kept 3”
from all sides and at least 1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]
LX3001MH
Finish
WH =White
BK =Black
S =Industrial Silver
SS =Stainless Steel (painted)
PM =Primer
Voltage
120 =120 volts
277 =277 volts
Lamp/Ballast Wattage
20 =20 watts
U.L. Listed. Suitable for use in
combustible ceilings.
rev. 011007