RTS XCP-48-RJ45 Quick start guide

XCP-48-RJ45
Breakout Panel Technical Guide
38110509 Rev F 8/2008

PROPRIETARY NOTICE
The product information and design disclosed herein were originated by
and are the property of Telex Communications, Inc. Telex reserves all
patent, proprietary design, manufacturing, reproduction, use and sales
rights thereto, and to any article disclosed therein, except to the extent
rights are expressly granted to others.
COPYRIGHT NOTICE
Copyright 2008 by Telex Communications, Inc. All rights reserved.
Reproduction, in whole or in part, without prior written permission from
Telex is prohibited.
WARRANTY NOTICE
See the enclosed warranty card for further details.
CUSTOMER SUPPORT
Technical questions should be directed to:
Customer Service Department
RTS/Telex Communications, Inc.
12000 Portland Avenue South
Burnsville, MN 55337 USA
Telephone: [phone]
Fax: [phone]
RETURN SHIPPING INSTRUCTIONS
Customer Service Department
Telex Communications, Inc. (Lincoln, NE)
Telephone: [phone]
Fax: [phone]
Factory Service: 800-553-5992
Please include a note in the box which supplies the company name,
address, phone number, a person to contact regarding the repair, the type
and quantity of equipment, a description of the problem and the serial
number(s).
SHIPPING TO THE MANUFACTURER
All shipments of product should be made via UPS Ground, prepaid (you
may request from Factory Service a different shipment method). Any
shipment upgrades will be paid by the customer. The equipment should
be shipped in the original packing carton. If the original carton is not
available, use any suitable container that is rigid and of adequate size. If
a substitute container is used, the equipment should be wrapped in paper
and surrounded with at least four (4) inches of excelsior or similar
shock-absorbing material. All shipments must be sent to the following
address and must include the Proof of Purchase for warranty repair.
Upon completion of any repair the equipment will be returned via
United Parcel Service or specified shipper, collect.
Factory Service Department
Telex Communications, Inc.
8601 East Cornhusker Hwy.
Lincoln, NE 68507 U.S.A.
Attn: Service
This package should include the following:

3
CHAPTER 1
XCP-48-RJ45
9000-7809-000
The XCP-48-RJ45 is the newly created 48-port RJ-45
breakout panel with MDR connector for the AIO-16 and
Cronus. It allow you to expand the number of RJ-45 ports on
the Intercom system.
NOTE: When using the 48-port RJ-45 breakout panel,
you MUST use the MDR backcard for both the
AIO-16 and Cronus.
FIGURE 1. XCP-48-RJ45
J6
J5
J4
J3
J2
J1
TELEX COMMUNICATIONS, INC.
MADE IN U.S.A.
XCP-48-RJ45
14
5678
23 14
5678
23 14
5678
23 14
5678
23 14
5678
23 14
5678
23
Ports
1-8
Ports
9-16
Ports
17-24
Ports
25-32
Ports
33-40
Ports
41-48
RJ-45
Pin 1 N/A
Pin 2 Keypanel Data -
Pin 3 Audio Out +
Pin 4 Audio In +
Pin 5 Audio In -
Pin 6 Audio Out -
Pin 7 Keypanel Data +
Pin 8 N/A
MDR Connector
Pin Number Port Function
81Data+
33 1 Data -
24 1 Audio To Matrix +
49 1 Audio To Matrix -
25 1 Audio From Matrix +
50 1 Audio From Matrix -
72Data+
32 2 Data -
22 2 Audio To Matrix +
47 2 Audio To Matrix -
23 2 Audio From Matrix +
48 2 Audio From Matrix -

4
NOTE: There are 6 MDR connectors on the XCP-48
RJ-45 Breakout panel.
63Data+
31 3 Data -
20 3 Audio To Matrix +
45 3 Audio To Matrix -
21 3 Audio From Matrix +
46 3 Audio From Matrix -
54Data+
30 4 Data -
18 4 Audio To Matrix +
43 4 Audio To Matrix -
19 4 Audio From Matrix +
44 4 Audio From Matrix -
45Data+
29 5 Data -
16 5 Audio To Matrix +
41 5 Audio To Matrix -
17 5 Audio From Matrix +
42 5 Audio From Matrix -
36Data+
28 6 Data -
14 6 Audio To Matrix +
39 6 Audio To Matrix -
15 6 Audio From Matrix +
40 6 Audio From Matrix -
27Data+
27 7 Data -
12 7 Audio To Matrix +
37 7 Audio To Matrix -
13 7 Audio From Matrix +
38 7 Audio From Matrix -
18Data+
26 8 Data -
10 8 Audio To Matrix +
35 8 Audio To Matrix -
MDR Connector
Pin Number Port Function
11 8 Audio From Matrix +
36 8 Audio From Matrix -
MDR Connector Port
J1 41-48
J2 33-40
J3 25-32
J4 17-24
J5 9-16
J6 1-8
MDR Connector
Pin Number Port Function

5
Notes