Rugged Ridge Omix-Ada Alloy Savannah JL User manual

Copyright © 2022 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [email protected]
Page 1/3
2. Lay the header channel on top of the fabric
tucking inside and secure with snaps as shown.
3. Secure with snaps as shown.
1. For correct installation, mounting surface of
part should be between 70-95° F (21-35° C)
prior to installation.
Remove existing hard or soft top. For OEM
(original/factory) soft tops, also remove:
Windshield header channel, Tube hardware,
side door surrounds can be used if wanted.
Brief Top works with or with out door
surrounds.
Unfold your new Savannah™ Brief Top and
lay onto a flat surface.
Savannah Brief Top, JL & JLU
Part # 13593.35
13594.35
IS-BT-04

Copyright © 2022 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [email protected]
Savannah Brief Top, JL & JLU
Page 2/3
5.Attach the windshield header to the windshield
using the bolt and curved washer provided.
6. Pull the top all the way back and attach the
rear strap to the hole
in the back of the roll bar. Tighten the strap until
snug.
4.Place the top onto the vehicle. Placing header
channel onto windshield front. Unfold the cover
fabric then pull over sound bar and roll cage,
working toward the rear of the vehicle.
Part # 13593.35
13594.35
IS-BT-04

Copyright © 2022 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [email protected]
Savannah Brief Top, JL & JLU
Page 3/3
7. Open all doors. Attach the hook and loop
straps around the roll bar to secure the brief to
the vehicle. Attach the two middle straps
together behind the window pillar as shown in
the picture.
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
• Do not use cleaning solvents of any kind.
Part # 13593.35
13594.35
IS-BT-04