Rugged Ridge 13579.71 User manual

Eclipse Sun Shade for Wrangler JL 4-Door
Page 1/2
Part #13579.71
1. Sun Shade ........................................................ (1)
2. Mesh Storage Bag........................................... (1)
3. Loop Strip ......................................................... (1)
Components
The Eclipse Sun Shade has been designed to work with 4dr models. Design allows shade to remain
in place with soft top closed. Eclipse shade has been supplied with a mesh storage bag. Bag and
Shade can be stored in either the center console or glove box.

Eclipse Sun Shade for Wrangler JL 4-Door
Page 2/2
1. Fold OE soft top or remove
OE hardtop. Refer to
owner’s manual.
2. Loosely position Sun Shade
on top of sport bar with hook
and loop section forward.
Attaching material of hook
and loop section should
face downward.
3. Clean center of windshield
frame thoroughly with alcohol.
Peel and stick Loop Strip to
windshield frame avoiding
contact with interior
plastic panel.
4. Attach Sun Shade hook and
loop section to the attached
Loop Strip.
5. In an alternating pattern,
secure Sun Shade by looping
straps around sport bar. DO
NOT fully tighten at this time.
Once all straps are secure,
repeat the pattern and
pull tight.
On side locations,
make sure straps only wrap
around sport bar and
not door surrounds.
STEP 2-4
STEP 3 STEP 5
STEP 5
1
2
3
4
5
6
7
8
9
10 12
11
14
13
Looking for soft tops and hard tops? Visit our website.