RusAutomation SANA200 User manual

SANA200/400/700
Please read this manual carefully before installing this product
for safe and long use.
▪ A horn speaker generating high volume through tympanum
which use compressed air as power.
▪ Adopting long durable special tympanum and valves which use
small compressed air
▪ The Suitability for urgent call, emergency alarm and etc for
Engine room or pumping station.
▪ In case of using in a small space, it is possible to adjust sound
pressure by installing reducing-valve separately.
▪ Standard body color:
MUNSELL NO. 7.5BG 7/2 (BLUE GREEN)
RED, BLACK
▪ Material of HORN: PC
▪ SOLENOID VALVE: ABS
▪ Protection Class: IP56
▪ Certificate : KIMM
Model Frequency
Sound
level
Air
pressure
Voltage Current Color
SANA200 200~300
Hz
130
±3dB
5~7
kg/㎠
DC24V 0.488A
R
BK
7.5BG
SANA400 400~600
Hz AC110V 0.111A
SANA700 700~800
Hz AC220V 0.055A
Please read product structure and below mentioned instruction
carefully in order to make suitable operation.
▪ Terminal is already positioned on valve box cover inside air
horn. Unscrew bolts ① in product cover and separate cover ②.
▪ In case of the product using DC power source, negative(-)
polarity should be connected with black line at terminal.
▪ It can cause the damage owing to infiltration of moisture or
dust if products are kept exposure outdoor without any
sealing of cable entry.(Standard 20C Cable Grand)
▪ The Entry of air supply ⑤ is assembled by using air exclusive
house. Please prevent the leakage of air with sealing material
such as Teflon tape or silicon when assembled. Or, it cause
malfunction or inoperable status.
▪ It may be damaged if moisture and dust penetrate into the
enclosure when it is placed on outdoor without sealing of the air
inlet.
OPERATING MANUAL
AIR HORN WITH SOLENOID VALVE BOX
ООО “РусАвтоматизация” 454010 Челябинск, Гагарина 5,
русавтоматизация.рф
Россия, тел. [phone],
тел./факс [phone]
(звонок бесплатный)
,[email protected], www.rusautomation.ru,

▪ This product is designed for wall mounting type with
waterproof structure.
▪ Fix the product after drilling a fixing hole at suitable wall place
where product will be attached. (See the external view
drawing for fixing hole size.)
▪ Tighten the product by using separate fixing bolt(M8 BOLT-
4EA). Vale box and Horn can be installed separately.
▪ This product is designed for water- & dust-proof type. Please
make sure to sustain airtightness as tightening the joint bolts of
each part necessarily when products are assembled or
disassembled.
▪ It cause reducing product lifespan or malfunction if rated
voltage is excessively increasing or decreasing. Rated voltage
should be within ±5% of rated voltage.
▪ If lens or body of the product is contaminated by chemicals
such as thinner, benzene, the product can be damaged,
discolored or deformed. Please be careful.
Symptoms Reason Solution
It does
not work
Air leakage Sealing of leaked position
Low air pressure Supply of suitable air
No power source Checking power line
QLIGHT CO., LTD.
http://www.qlight.com
E-mail: [email protected]
Overseas Marketing Team / Plant
Tel) 055-328-4082 Fax) 055-328-3883
185-25 Mukbang-ro Sangdong-Myun, Gimhae-Si,
Gyeongsangnam-do, Korea
Troubleshooting
Caution
Product inquiry and Customer support
ООО “РусАвтоматизация” 454010 Челябинск, Гагарина 5,
русавтоматизация.рф
Россия, тел. [phone],
тел./факс [phone]
(звонок бесплатный)
,[email protected], www.rusautomation.ru,