English
1
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
EL
TR
SPECIAL SAFETY RULES
Wear ear protectors when drilling. Exposure to noise
can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
INTENDED USE
You may use this product for the purposes listed below:
Drilling in all types of wood
Drilling in ceramics, plastics, fiberglass and laminates
Drilling in metals.
MAINTENANCE
When servicing, use only identical Ryobi replacement
parts. Use of any other parts may create a hazard or
cause product damage.
Always wear safety goggles or safety glasses with side
shields when operating tools. Failure to do so could
result in objects being thrown into your eyes, resulting
in possible serious injury.
To avoid serious personal injury, always remove the
battery pack from the tool when cleaning or performing
any maintenance.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease,
etc.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.
SYMBOL
Safety alert
VVolts
min-1 Revolutions per minute
Direct current
CE conformity
Conformance to technical regulations
Please read the instructions carefully
before starting the machine.
Wear ear protection
Wear eye protection
Recycle
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check
with your Local Authority or retailer for
recycling advice.
ICONS IN THIS MANUAL
Safety
Getting started
Information
Lock
Unlock
Do not touch rotating part
