SAFAVIEH COUTURE SFV5534A User manual

Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items on items can discolor wood.
Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Cleaning should be done with a soft line free cotton cloth dampened with water or furniture polish.
On highly used surfaces we recommend applying a quality paste wax, which should be used on a regular basis to
provide additional protection from scratches and spills.
How often you apply the wax depends on how much wear the furniture receives.
CARE AND MAINTENANCE
Please make sure thatyou have all parts indicated before you begin assembly of this item
This item should be assembled on a soft surface to prevent scratching the finish during assembly.
This item may require periodic tightening.
NOTICE
PIECE DESCRIPTION PICTURE QUANTITY
A
B
HW1
HW2
HW3
CABINET
LEG
8mm x16mm
ALLEN BOLT
6X0.5X20MM
ALLEN KEY
4mm
1X
2X
8X
8X
8X
1X
Model #SFV5534A
Productdimensions:68”Wx18”Dx30”H
Part List and Hardware List
HW4
Weight capacity: 200 LBS
WARNING: DO NOT STAND ON SIDE BOARD
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
8mm x15mm
C 2X
8XHW5 SHELF PIN
SHELF

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged,do not attempt to assemble the product.
Estimated assembly time: 15 minutes.
PREPARATION
STEP 1: Lay the cabinet A as shown in figure, place leg B then insert washer HW1, split lock washer HW2, Allen
bolt HW3 and tighten with the help of Allen key HW4
HW1
HW2
HW4
HW3
2X
B
B
A
Straighten the item, nowyour item is ready to use.