Safe Fleet Prime Design VBC-FT21B User manual

PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: [phone] ▪ 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2015 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6092974, 6764268, 6971563, 2364879, 8857689, 8511525, 8991889 AND OTHER PATENTS PENDING
2
2
3
4
6
7
8
1
5
9
10
Channels (2X)
M8 Spacer (6X) Foam Gasket (6X)
End Caps (4X)
Brackets (4X)
Connect Plate (6X)
M8 X 35MM (6X)
Foam Pad (6X)
VBC-FT21B ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS
CONTENTS OVERVIEW
1—FBM-0010 ........................................................ (Qty 1)
Channels with hardware
2—Rear Crossbar Assembly.................................. (Qty 1)
3—Front Crossbar Assembly ................................. (Qty 1)
4—Handle Latch Assembly ................................... (Qty 1)

PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: [phone] ▪ 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2015 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6092974, 6764268, 6971563, 2364879, 8857689, 8511525, 8991889 AND OTHER PATENTS PENDING
3
VBC-FT21B ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS
7—Quick Clamp Tube Splice Assembly ................ (Qty 1)
5.00“
9— Front Hook Assembly ...................................... (Qty 1)
6—Clamp Down Tube ............................................ (Qty 1)
80.00”
8—Removeable Horn with Cap............................. (Qty 1)
15.00”
ASZ-0101 (1X)
11—Anti-Seize........................................................ (Qty 1)
5—Clamp Down Handle Assembly ....................... (Qty 1)
BLT-6846-M8 (1X)
10—Ladder Stop Assembly................................... (Qty 2)
1.75”

PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: [phone] ▪ 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2015 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6092974, 6764268, 6971563, 2364879, 8857689, 8511525, 8991889 AND OTHER PATENTS PENDING
4
VBC-FT21B ASSEMBLY INSTRUCTIONS–FBM MOUNTINGS
Rear
Front
Left
Right
Rear
Front
Left
Right
Rear
Front
Left
Right
Left Rear
72.00”
Flush to end
Right Rear
5.00”
Channel Front
4.75”
Channel Rear
Fig. 1
72.00”
Flush to end
Metal Spacer
Foam Gasket
FBM-0010
CHANNELS TO ROOF
Slide Channel Connectors
into Channels as shown
0.6 Loosen bolts
0.7 Set to distances then torque Rear Bracket nuts to 90 in-lbs
Install Channels into roof Channel groove as shown
0.3
Position Channels as
shown below in Fig.1
0.1
0.2
0.4
0.5
Install fasteners into factory
roof rail mounting locations.
Torque to 150 in-lbs.

PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: [phone] ▪ 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2015 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6092974, 6764268, 6971563, 2364879, 8857689, 8511525, 8991889 AND OTHER PATENTS PENDING
5
Rear
Front
1
1
4
3
2
5
Even EvenRear
Even EvenFront
VBC-FT21B ASSEMBLY INSTRUCTIONS–RIGHT SIDE CLAMP DOWN
RIGHT CLAMP DOWN
ASSEMBLY SEQUENCE
CROSSBARS CROSSBAR ADJUSTMENT
1.1
Torque to
90 in-lbs 1.2

PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: [phone] ▪ 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2015 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6092974, 6764268, 6971563, 2364879, 8857689, 8511525, 8991889 AND OTHER PATENTS PENDING
6
VBC-FT21B ASSEMBLY INSTRUCTIONS–RIGHT SIDE CLAMP DOWN
CLAMP DOWN HANDLE CLAMP DOWN TUBE
2
3.2
3.1
3.3
3.4
Torque to 90 in-lbs
Torque to 90 in-lbs
HANDLE LATCH FRONT LADDER HOOK
SEE QUICK START GUIDE FOR ADJUSTMENTS
4.2 Torque to 90 in-lbs
4.1
5.2
Torque to 90 in-lbs
5.1

PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: [phone] ▪ 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2015 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6092974, 6764268, 6971563, 2364879, 8857689, 8511525, 8991889 AND OTHER PATENTS PENDING
7
6
6
LADDER STOPS
VBC-FT21B ASSEMBLY INSTRUCTIONS–LADDER STOPS
ADDITIONAL INFORMATION
For additional information regarding your VBC-FT21B Ladder Rack,
please visit the Prime Design website at: www.primedesign.net.
Using a QR code reader in your smart phone or tablet, read the QR
Code shown below and follow the same steps as you would from your
laptop or computer.
If you’re viewing this document as an interactive PDF, you may simply
click on the QR Code below to access the Prime Design website.
6.2
Torque to 90 in-lbs
6.1
Loosen nuts
LADDER STOPS

USAM-VBCFT21B-US01 Rev-A 0715