Safety Link GO Trek User manual

Safety Link is a division of Ballarat Health Services.
Welcome to Safety Link
mPERS
Congratulations on choosing Safety Link and the GO Trek as your mobile alarm
service. For your information, the following items are included in the GO Trek box:
- The GO Trek device
- The charging platform, a USB cable, and a plug pack
- A split ring for those that wish to attach the device to a key-ring
- This GO Trek Welcome and Quick Start Guide
- A GO Trek System Guide which explains how the device operates.
Please keep the guide in a safe place for future reference
- A Test Reminder Magnet which can be placed on your refrigerator
as a reminder to do your monthly test and recharge the GO Trek
- A Conditions of Use document
Thank you for choosing Safety Link’s GO Trek, we trust you will enjoy the
independence and peace-of-mind that GO Trek offers.
Overleaf you will find a Quick Start Guide for the initial set-up of GO Trek.
Please contact Safety Link with any questions regarding the GO Trek system
on 1800 813 617, or email: [email protected]g.au
Yours sincerely,
The Safety Link Team
Continued overleaf

CD 0008 Issue 1
Step Action Advice
1Remove all items from the box Remove the GO Trek device and charging
equipment from the box
2Find a suitable location for
the charging platform
The GO Trek requires an available
power point
3Connect the charging base
and the power pack using
the supplied cable
4Plug the connected power
pack into the power point
You can now turn the power point
switch to ON
5Place the GO Trek (text facing
down) in the charging base
to charge correctly
If inserted correctly, the charging base
will flash blue during charging
6IMPORTANT: To finalise the
set-up of your new GO Trek,
please call our Client Services
team on 1800 444 033
between 8.30am and 5pm
AEST, Monday to Friday
You will receive instructions on GO Trek’s
operation and be asked to perform a test
Please Note: GO Trek is NOT operational
until you have completed this step
Quick Start Guide
+ +