Salda KF T120 EC Series User manual

Subject to technical modication
KF-T120 EC_P0109_AZ_0002
KF-T120 EC
KITCHEN FANS
INSTALLATION AND OPERATION MANUAL

2
KF T120 EC
Safety instructions and warnings 3
General information 3
Safety precautions 3
Symbols 3
Description 4
Dimensions and weight 4
Working conditions 4
Technical data 5
Standard package of components 7
Components 7
Accessories 8
Spare parts 9
Installation 10
Transportation ant storage 10
Unpacking 10
Space requirements 12
Maintenance 12
Electrical connection and control 13
Start-up recommendations 20
Safety requirements 20
Cleaning the equipment 21
Changing of the replacement unit 21
Faults, their removal, troubleshooting 22
Warranty 23
Unit’s maintenance table 24

3
KF T120 EC
STICK HERE
200003025238
IV
PV
KE
PE
M
0.084 kW; 0.92 A; 230/50 V/Hz; ~1
0.085 kW; 0.93 A; 230/50 V/Hz; ~1
kW; A; 0 V/Hz; ~0
kW; A; 0 V/Hz; ~0
0.005 kW; 0.021 A; 24/50 V/Hz; ~-
0.17 kW; 1.87 A; IP-55; 00 kg
TOTAL:
gu072489 / 2014.03 www.salda.lt
1
3
4
5
2
6
200003025238
IV
PV
KE
PE
M
0.084 kW; 0.92 A; 230/50 V/Hz; ~1
0.085 kW; 0.93 A; 230/50 V/Hz; ~1
kW; A; 0 V/Hz; ~0
kW; A; 0 V/Hz; ~0
0.005 kW; 0.021 A; 24/50 V/Hz; ~-
0.17 kW; 1.87 A; IP-55; 00 kg
TOTAL:
gu072489 / 2014.03 www.salda.lt
1
3
4
5
2
6
PAVYZDYS
EXAPLE
PAVADINIMAS
TITLE
M
200003025238
IV
PV
KE
PE
M
0.084 kW; 0.92 A; 230/50 V/Hz; ~1
0.085 kW; 0.93 A; 230/50 V/Hz; ~1
kW; A; 0 V/Hz; ~0
kW; A; 0 V/Hz; ~0
0.005 kW; 0.021 A; 24/50 V/Hz; ~-
0.17 kW; 1.87 A; IP-55; 00 kg
TOTAL:
gu072489 / 2014.03 www.salda.lt
1
3
4
5
2
6
ESEMPIO
TITOLO
200003025238
IV
PV
KE
PE
M
0.084 kW; 0.92 A; 230/50 V/Hz; ~1
0.085 kW; 0.93 A; 230/50 V/Hz; ~1
kW; A; 0 V/Hz; ~0
kW; A; 0 V/Hz; ~0
0.005 kW; 0.021 A; 24/50 V/Hz; ~-
0.17 kW; 1.87 A; IP-55; 00 kg
TOTAL:
gu072489 / 2014.03 www.salda.lt
1
3
4
5
2
6
MUSTER
TITEL
200003025238
IV
PV
KE
PE
M
0.084 kW; 0.92 A; 230/50 V/Hz; ~1
0.085 kW; 0.93 A; 230/50 V/Hz; ~1
kW; A; 0 V/Hz; ~0
kW; A; 0 V/Hz; ~0
0.005 kW; 0.021 A; 24/50 V/Hz; ~-
0.17 kW; 1.87 A; IP-55; 00 kg
TOTAL:
gu072489 / 2014.03 www.salda.lt
1
3
4
5
2
6
ПPИМEP
НАЗВАНИЕ
200003025238
IV
PV
KE
PE
M
0.084 kW; 0.92 A; 230/50 V/Hz; ~1
0.085 kW; 0.93 A; 230/50 V/Hz; ~1
kW; A; 0 V/Hz; ~0
kW; A; 0 V/Hz; ~0
0.005 kW; 0.021 A; 24/50 V/Hz; ~-
0.17 kW; 1.87 A; IP-55; 00 kg
TOTAL:
gu072489 / 2014.03 www.salda.lt
1
3
4
5
2
6
PRZYKŁAD
TYTUŁ
200003025238
IV
PV
KE
PE
M
0.084 kW; 0.92 A; 230/50 V/Hz; ~1
0.085 kW; 0.93 A; 230/50 V/Hz; ~1
kW; A; 0 V/Hz; ~0
kW; A; 0 V/Hz; ~0
0.005 kW; 0.021 A; 24/50 V/Hz; ~-
0.17 kW; 1.87 A; IP-55; 00 kg
TOTAL:
gu072489 / 2014.03 www.salda.lt
1
3
4
5
2
6
EXEMPLE
TITRE
7
7
7
7
7
7
7
Stick the auxiliary label on the unit (on an easily accessible place) or on the
dashed place of a technical manual in order to keep the important informa-
tion about the unit.
1 – Logo
2 – Internal usage code
3 – Brand name
4 – Technical data
5 – Units number
6 – Web address
7 - weight
Warning – pay attention Additional information
• It is necessary to comply with labor safety regulations .
• Prior to the installation of the device it is necessary to read all the material presented in this document.
• The device installation can be performed only by trained and qualied sta󰀨, familiar with this type of equipment installation, verication, maintenance
and required tools for installation works.
• Make sure that all the warning signs on the fan are complete and legible.
• The device can only work under following conditions.
• It is strictly prohibited to use the device not for its purpose or not under provided working conditions without receiving a written permit from the manu-
facturer or its representative.
• In the event of failure, it must be reported to he manufacturer or its representative with the description of the failure and provide data on product label.
• In the event of a failure, it is prohibited to repair, disassemble the device without a written consent from the manufacturer or its representative.
• Do not use this device for other purposes than described in this manual.
• Do not disassemble or modify the unit in any way which may lead to mechanical failure or injury.
• Use special clothing and be careful while performing maintenance and repair jobs – the unit’s and its components’ edges may be sharp and cutting.
• Do not wear loose clothing that could be entangled in to operating unit.
• Do not place ngers or other foreign objects through inlet or exhaust guards or into connected duct. If a foreign object enters the unit, immediately
disconnect power source. Before removing object, make sure that any mechanical motion has stopped, the heater has cooled down and the restart is
not possible.
• Do not connect to any other power source than indicated on the model label.
• Do not place or operate unit on unsteady surfaces and mounting frames.
• Mount the unit rmly to ensure safe operating.
• Never use this unit in any explosive or aggressive elements containing environment.
• Do not use the unit if external connections are broken or damaged. If there are any defects, stop operating the unit and replace the damaged parts im-
mediately. That can be performed only by qualied electrician.
• Do not use water or another liquid to clean electrical parts or connections.
• If you notice water on electrical parts or connections, stop operating the unit.
• Do not use fan without air duct system and protective grills, what protects from foreign objects.

4
KF T120 EC
• KF-T120 EC is designed for extracting wet, greased and hot (max 120 OC) air. These fans are for commercial kitchen applications.
• Fan speed can be controlled by 0-10V speed control devices.
• Maintenance undemanding bearings.
• Automatic thermo contact engine protection (except KF T120 F160 EC).
• Thickness of acoustic and thermal insulation of walls – 50 mm.
ATTENTION! It is necessary to use lter before the fan.
*Estimated dimension
• It is prohibited to use the devices in potentially explosion hazardous environment.
• The device is used to extract air (free from metal corroding chemicals; aggressive substances for zinc, plastic, rubber; hard, sticky and brous par-
ticles) from the room.
• Please note the maximum allowed ambient temperature (please see technical data table in page 5).
• The maximum temperature of transported air can not exceed 120 OC.
A
[mm]
A1
[mm]
B
[mm]
C
[mm]
C1
[mm]
øD
[mm]
øD1
[mm]
F1
[mm]
F2
[mm]
H
[mm]
H1
[mm]
L
[mm]
L1
[mm]
L2
[mm]
Weight
[kg]
KF-T120 F 160 EC 131 107 413 242 195 200 200 80 31 469 355 228 173 420 17
KF-T120 F 180 EC 146 112 456 270 213 200 200 80 31 495 382 237 182 420 21
KF-T120 F 200 EC 149 119 484 285 228 200 200 80 31 520 407 251 196 500 26
KF-T120 F 250 EC 170 126 577 341 278 315 315 90 40 623 500 291 236 620 34
KF-T120 F 280 EC 180 153 625 367 304 315 315 90 40 661 537 308 253 620 60
KF-T120 B 315 EC 195 142 695 410 339 315 315 90 40 724 601 298 243 620 39
KF-T120 B 355 EC 211 163 770 455 370 400 400 190 71 878 655 340 285 620 48
KF-T120 B 400 EC 202 170 750 451 355 400 400 190 71 863 640 353 298 620 51
B
H1
H*
F1
D
D1
C1
L2
L
L1
F2
C
A
A1
B

5
KF T120 EC
KF-T120 EC F160 F180 F200 F250 F280 B315 B355 B400
- phase/voltage [50 Hz/VAC] ~1/230 ~1/230 ~1/230 ~1/230 ~3/400 ~1/230 ~1/230 ~1/230
- power [kW] 0,134 0,250 0,450 0,740 2,60 0,150 0,15 0,435
- current [A] 1,2 1,2 2,0 3,2 40,7 0,7 1,9
- speed [min-1] 1500 1500 1490 1360 1500 1500 1500 1490
- max. ambient temperature [Co] +45 +55 +60 +40 +40 +60 +60 +55
- min. ambient temperature [Co] -25 -25 -25 -25 -25 -25 -25 -25
- motor protection class IP44 IP55 IP55 IP55 IP55 IP55 IP55 IP55
- Impeller type FW FW FW FW FW BW BW BW
- Cross-section of terminal con-
nection [mm2]2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5
- Connection scheme SP23-b SP25-b SP26-b SP26-b SP27-b SP25-b SP25-b SP26-b
KF-T120 F 160 EC LWA all, dB(A) LWA, dB(A)
125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz
Supply 73 63 66 70 64 59 57 52
Exhaust 75 64 70 71 63 62 59 54
Surrounding 58 50 52 54 48 44 41 35
Measured at ow/pressure [m3/h / Pa] 802/100
KF-T120 F 180 EC LWA all, dB(A) LWA, dB(A)
125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz
Supply 81 67 70 80 72 65 64 58
Exhaust 83 67 71 82 71 70 66 61
Surrounding 67 57 62 63 58 55 51 47
Measured at ow/pressure [m3/h / Pa] 1641/102
KF-T120 F 200 EC LWA all, dB(A) LWA, dB(A)
125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz
Supply 84 75 76 82 75 71 67 61
Exhaust 85 76 79 82 76 70 69 64
Surrounding 71 62 64 68 59 54 51 47
Measured at ow/pressure [m3/h / Pa] 2603/103
KF-T120 F 250 EC LWA all, dB(A) LWA, dB(A)
125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz
Supply 81 72 75 77 70 68 64 57
Exhaust 83 74 77 79 72 70 66 62
Surrounding 68 59 63 65 56 52 48 44
Measured at ow/pressure [m3/h / Pa] 3506/125
KF-T120 F 280 EC LWA all, dB(A) LWA, dB(A)
125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz
Supply 89 80 84 86 78 72 70 67
Exhaust 91 82 85 88 81 75 71 69
Surrounding 76 69 70 72 65 61 56 51
Measured at ow/pressure [m3/h / Pa] 6343/207
KF-T120 B 315 EC LWA all, dB(A) LWA, dB(A)
125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz
Supply 72 64 67 68 64 59 53 49
Exhaust 74 65 68 70 65 61 55 52
Surrounding 64 55 61 59 52 48 45 43
Measured at ow/pressure [m3/h / Pa] 1780/123
KF-T120 B 355 EC LWA all, dB(A) LWA, dB(A)
125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz
Supply 76 66 69 72 71 65 59 52
Exhaust 78 68 71 75 68 66 59 54
Surrounding 64 56 58 59 55 51 43 39
Measured at ow/pressure [m3/h / Pa] 2826/100
KF-T120 B 400 EC LWA all, dB(A) LWA, dB(A)
125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz
Supply 81 72 71 78 75 70 64 63
Exhaust 83 74 77 80 73 71 66 65
Surrounding 69 62 63 65 59 56 51 47
Measured at ow/pressure [m3/h / Pa] 3480/149
NOTE: Subject to technical modication

6
KF T120 EC
operational limits
power consumption
KF-T120 F 160 EC KF-T120 F 180 EC
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
700
600
500
400
300
200
100
0 1000 2000 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
4
3,5
3
2,5
2
1,5
1
0,5
0,0
800
700
600
500
400
300
200
100
0 1000 2000 3000 4000 5000 6000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
1,2
0,8
0,6
0,4
0,2
0
600
400
200
0 500 1000 1500 2000 2500 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
300
500 1
3
0,8
0,5
0,4
0,3
0,2
0,1
0
400
250
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
300 0,6
0,7
3
0,6
0,5
0,4
0,3
0,2
0,1
0
300
250
150
50
0 200 400 600 800 1000 1200 1400 1600 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
3
0,2
0,18
0,16
0,14
0,12
0,1
0,08
0,06
0,04
0,02
0
200
180
160
120
100
80
40
20
0 200 400 600 800 1000 v [m /h]
Δ P [Pa]
stat
P [kW]
60
140
3
500
450
350
300
200
150
50
0 500 1000 1500 2000 2500 v [m /h]
Δ P [Pa]
stat
3
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
400
350
300
250
200
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
100%
90%
80%
70%60%
50%
40%
30%
100%
100%
90%
80%
80%
70%
70%
60%
50%
40%
30%
100%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%30%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100% 90%
80%
70%
60%
50%
40%
30%
100%70%60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%70%60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100
250
400
500
0,5
0,3
0,2
0,1
0
P [kW]
0,4
100%
90%
80%
70%
60%
50%
40%
30%
100%
70%
60%
50%
40%
30%
100
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
700
600
500
400
300
200
100
0 1000 2000 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
4
3,5
3
2,5
2
1,5
1
0,5
0,0
800
700
600
500
400
300
200
100
0 1000 2000 3000 4000 5000 6000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
1,2
0,8
0,6
0,4
0,2
0
600
400
200
0 500 1000 1500 2000 2500 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
300
500 1
3
0,8
0,5
0,4
0,3
0,2
0,1
0
400
250
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
300 0,6
0,7
3
0,6
0,5
0,4
0,3
0,2
0,1
0
300
250
150
50
0 200 400 600 800 1000 1200 1400 1600 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
3
0,2
0,18
0,16
0,14
0,12
0,1
0,08
0,06
0,04
0,02
0
200
180
160
120
100
80
40
20
0 200 400 600 800 1000 v [m /h]
Δ P [Pa]
stat
P [kW]
60
140
3
500
450
350
300
200
150
50
0 500 1000 1500 2000 2500 v [m /h]
Δ P [Pa]
stat
3
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
400
350
300
250
200
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
100%
90%
80%
70%60%
50%
40%
30%
100%
100%
90%
80%
80%
70%
70%
60%
50%
40%
30%
100%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%30%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100% 90%
80%
70%
60%
50%
40%
30%
100%70%60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%70%60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100
250
400
500
0,5
0,3
0,2
0,1
0
P [kW]
0,4
100%
90%
80%
70%
60%
50%
40%
30%
100%
70%
60%
50%
40%
30%
100
KF-T120 F 200 EC KF-T120 F 250 EC
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
700
600
500
400
300
200
100
0 1000 2000 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
4
3,5
3
2,5
2
1,5
1
0,5
0,0
800
700
600
500
400
300
200
100
0 1000 2000 3000 4000 5000 6000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
1,2
0,8
0,6
0,4
0,2
0
600
400
200
0 500 1000 1500 2000 2500 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
300
500 1
3
0,8
0,5
0,4
0,3
0,2
0,1
0
400
250
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
300 0,6
0,7
3
0,6
0,5
0,4
0,3
0,2
0,1
0
300
250
150
50
0 200 400 600 800 1000 1200 1400 1600 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
3
0,2
0,18
0,16
0,14
0,12
0,1
0,08
0,06
0,04
0,02
0
200
180
160
120
100
80
40
20
0 200 400 600 800 1000 v [m /h]
Δ P [Pa]
stat
P [kW]
60
140
3
500
450
350
300
200
150
50
0 500 1000 1500 2000 2500 v [m /h]
Δ P [Pa]
stat
3
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
400
350
300
250
200
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
100%
90%
80%
70%60%
50%
40%
30%
100%
100%
90%
80%
80%
70%
70%
60%
50%
40%
30%
100%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%30%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100% 90%
80%
70%
60%
50%
40%
30%
100%70%60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%70%60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100
250
400
500
0,5
0,3
0,2
0,1
0
P [kW]
0,4
100%
90%
80%
70%
60%
50%
40%
30%
100%
70%
60%
50%
40%
30%
100
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
700
600
500
400
300
200
100
0 1000 2000 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
4
3,5
3
2,5
2
1,5
1
0,5
0,0
800
700
600
500
400
300
200
100
0 1000 2000 3000 4000 5000 6000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
1,2
0,8
0,6
0,4
0,2
0
600
400
200
0 500 1000 1500 2000 2500 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
300
500 1
3
0,8
0,5
0,4
0,3
0,2
0,1
0
400
250
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
300 0,6
0,7
3
0,6
0,5
0,4
0,3
0,2
0,1
0
300
250
150
50
0 200 400 600 800 1000 1200 1400 1600 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
3
0,2
0,18
0,16
0,14
0,12
0,1
0,08
0,06
0,04
0,02
0
200
180
160
120
100
80
40
20
0 200 400 600 800 1000 v [m /h]
Δ P [Pa]
stat
P [kW]
60
140
3
500
450
350
300
200
150
50
0 500 1000 1500 2000 2500 v [m /h]
Δ P [Pa]
stat
3
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
400
350
300
250
200
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
100%
90%
80%
70%60%
50%
40%
30%
100%
100%
90%
80%
80%
70%
70%
60%
50%
40%
30%
100%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%30%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100% 90%
80%
70%
60%
50%
40%
30%
100%70%60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%70%60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100
250
400
500
0,5
0,3
0,2
0,1
0
P [kW]
0,4
100%
90%
80%
70%
60%
50%
40%
30%
100%
70%
60%
50%
40%
30%
100
KF-T120 F 280 EC KF-T120 B 315 EC
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
700
600
500
400
300
200
100
0 1000 2000 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
4
3,5
3
2,5
2
1,5
1
0,5
0,0
800
700
600
500
400
300
200
100
0 1000 2000 3000 4000 5000 6000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
1,2
0,8
0,6
0,4
0,2
0
600
400
200
0 500 1000 1500 2000 2500 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
300
500 1
3
0,8
0,5
0,4
0,3
0,2
0,1
0
400
250
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
300 0,6
0,7
3
0,6
0,5
0,4
0,3
0,2
0,1
0
300
250
150
50
0 200 400 600 800 1000 1200 1400 1600 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
3
0,2
0,18
0,16
0,14
0,12
0,1
0,08
0,06
0,04
0,02
0
200
180
160
120
100
80
40
20
0 200 400 600 800 1000 v [m /h]
Δ P [Pa]
stat
P [kW]
60
140
3
500
450
350
300
200
150
50
0 500 1000 1500 2000 2500 v [m /h]
Δ P [Pa]
stat
3
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
400
350
300
250
200
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
100%
90%
80%
70%60%
50%
40%
30%
100%
100%
90%
80%
80%
70%
70%
60%
50%
40%
30%
100%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%30%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100% 90%
80%
70%
60%
50%
40%
30%
100%70%60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%70%60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100
250
400
500
0,5
0,3
0,2
0,1
0
P [kW]
0,4
100%
90%
80%
70%
60%
50%
40%
30%
100%
70%
60%
50%
40%
30%
100
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
700
600
500
400
300
200
100
0 1000 2000 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
4
3,5
3
2,5
2
1,5
1
0,5
0,0
800
700
600
500
400
300
200
100
0 1000 2000 3000 4000 5000 6000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
1,2
0,8
0,6
0,4
0,2
0
600
400
200
0 500 1000 1500 2000 2500 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
300
500 1
3
0,8
0,5
0,4
0,3
0,2
0,1
0
400
250
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
300 0,6
0,7
3
0,6
0,5
0,4
0,3
0,2
0,1
0
300
250
150
50
0 200 400 600 800 1000 1200 1400 1600 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
3
0,2
0,18
0,16
0,14
0,12
0,1
0,08
0,06
0,04
0,02
0
200
180
160
120
100
80
40
20
0 200 400 600 800 1000 v [m /h]
Δ P [Pa]
stat
P [kW]
60
140
3
500
450
350
300
200
150
50
0 500 1000 1500 2000 2500 v [m /h]
Δ P [Pa]
stat
3
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
400
350
300
250
200
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
100%
90%
80%
70%60%
50%
40%
30%
100%
100%
90%
80%
80%
70%
70%
60%
50%
40%
30%
100%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%30%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100% 90%
80%
70%
60%
50%
40%
30%
100%70%60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%70%60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100
250
400
500
0,5
0,3
0,2
0,1
0
P [kW]
0,4
100%
90%
80%
70%
60%
50%
40%
30%
100%
70%
60%
50%
40%
30%
100
KF-T120 B 355 EC KF-T120 B 400 EC
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
700
600
500
400
300
200
100
0 1000 2000 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
4
3,5
3
2,5
2
1,5
1
0,5
0,0
800
700
600
500
400
300
200
100
0 1000 2000 3000 4000 5000 6000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
1,2
0,8
0,6
0,4
0,2
0
600
400
200
0 500 1000 1500 2000 2500 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
300
500 1
3
0,8
0,5
0,4
0,3
0,2
0,1
0
400
250
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
300 0,6
0,7
3
0,6
0,5
0,4
0,3
0,2
0,1
0
300
250
150
50
0 200 400 600 800 1000 1200 1400 1600 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
3
0,2
0,18
0,16
0,14
0,12
0,1
0,08
0,06
0,04
0,02
0
200
180
160
120
100
80
40
20
0 200 400 600 800 1000 v [m /h]
Δ P [Pa]
stat
P [kW]
60
140
3
500
450
350
300
200
150
50
0 500 1000 1500 2000 2500 v [m /h]
Δ P [Pa]
stat
3
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
400
350
300
250
200
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
100%
90%
80%
70%60%
50%
40%
30%
100%
100%
90%
80%
80%
70%
70%
60%
50%
40%
30%
100%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%30%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100% 90%
80%
70%
60%
50%
40%
30%
100%70%60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%70%60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100
250
400
500
0,5
0,3
0,2
0,1
0
P [kW]
0,4
100%
90%
80%
70%
60%
50%
40%
30%
100%
70%
60%
50%
40%
30%
100
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
700
600
500
400
300
200
100
0 1000 2000 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
4
3,5
3
2,5
2
1,5
1
0,5
0,0
800
700
600
500
400
300
200
100
0 1000 2000 3000 4000 5000 6000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
1,2
0,8
0,6
0,4
0,2
0
600
400
200
0 500 1000 1500 2000 2500 3000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
300
500 1
3
0,8
0,5
0,4
0,3
0,2
0,1
0
400
250
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
300 0,6
0,7
3
0,6
0,5
0,4
0,3
0,2
0,1
0
300
250
150
50
0 200 400 600 800 1000 1200 1400 1600 v [m /h]
Δ P [Pa]
stat
P [kW]
100
200
3
0,2
0,18
0,16
0,14
0,12
0,1
0,08
0,06
0,04
0,02
0
200
180
160
120
100
80
40
20
0 200 400 600 800 1000 v [m /h]
Δ P [Pa]
stat
P [kW]
60
140
3
500
450
350
300
200
150
50
0 500 1000 1500 2000 2500 v [m /h]
Δ P [Pa]
stat
3
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
400
350
300
250
200
150
50
0 500 1000 1500 2000 v [m /h]
Δ P [Pa]
stat
P [kW]
3
100%
90%
80%
70%60%
50%
40%
30%
100%
100%
90%
80%
80%
70%
70%
60%
50%
40%
30%
100%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%30%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100% 90%
80%
70%
60%
50%
40%
30%
100%70%60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100%
90%
80%70%60%
50%40%
30%
100%
90%
80%
70%
60%
50%
40%
30%
100
250
400
500
0,5
0,3
0,2
0,1
0
P [kW]
0,4
100%
90%
80%
70%
60%
50%
40%
30%
100%
70%
60%
50%
40%
30%
100

7
KF T120 EC
Standard package (without optional accessories) includes:
1. Fan KF T120 EC– 1 pcs.;
2. Support (anti-vibration feet TS 25-30) – 4 pcs.;
3. Screws (8 DIN 934) – 4 pcs.;
4. Washers (8 DIN 127) – 4 pcs.
1. The upper ange
2. Hinges
3. Housing
4. Anti-vibration feet
5. Connection Ring
6. Fan
7. Fat chutes with a plug 1/2 “
8. Switch **
9. Roof
10. Engine
11. Electrical connection box
12. Feet
13. Panel bushings
14. Handle
** - Available as an accessory
1
3
4
65
2
13
14
13
8
11
10
9
12
67

8
KF T120 EC
Stouch* NPU AB
SKG-A AP ALU
AGO RSK RC-MAN-PU
MTP010 S-1141* On/O󰀨 switch
25A/1f
On/O󰀨 switch
25A/3f
KF-T120 F 160 EC / KF-T120 F 180 EC / KF-T120 F 200 EC
Controller Stouch* PRGPU51
On/O󰀨 switch On/O󰀨 switch 25A/1f GPU235_1006E
Manual regulation MTP010 PRGR0025
SPS di󰀨erential pressure trans-
mitter
S-1141* ZAKKT0047
Flexible connection for high
temperature
RC-MAN-PU 200 ZPDLJ001
Guard grilles AGO 200 GGRAGO004
Back-draft damper RSK 200 GSKRSK004
Coupling NPU 200 GFDNPUC004
Clamp AP 200 GAPAP005
Branch pipe “Outlet Cover” AB 200 GFDABC004
Outdoor ventilation grille ALU 200 GGRALU004
Shut-o󰀨 damper SKG-A 200 GSKSKG004
KF-T120 F 250 EC / KF-T120 F 280 EC / KF-T120 B 315 EC
Controller Stouch* PRGPU51
On/O󰀨 switch
On/O󰀨 switch 25A/1f GPU235_1006E
On/O󰀨 switch 25A/3f
(only KF-T120 F280 EC) GPU235_1007E
Manual regulation MTP010 PRGR0025
SPS di󰀨erential pressure trans-
mitter
S-1141* ZAKKT0047
Flexible connection for high
temperature
RC-MAN-PU 315 ZPDLJ003
Guard grilles AGO 315 GGRAGO006
Back-draft damper RSK 315 GSKRSK006
Coupling NPU 315 GFDNPUC006
Clamp AP 315 GAPAP007
Branch pipe “Outlet Cover” AB 315 GFDABC006
Outdoor ventilation grille ALU 315 GGRALU006
Shut-o󰀨 damper SKG-A 315 GSKSKG006
KF-T120 B 355 EC / KF-T120 B 400 EC
Controller Stouch* PRGPU51
On/O󰀨 switch On/O󰀨 switch 25A/1f GPU235_1006E
Manual regulation MTP010 PRGR0025
SPS di󰀨erential pressure trans-
mitter
S-1141* ZAKKT0047
Flexible connection for high
temperature
RC-MAN-PU 400 ZPDLJ004
Guard grilles AGO 400 GGRAGO007
Back-draft damper RSK 400 GSKRSK007
Coupling NPU 400 GFDNPUC007
Clamp AP 400 GAPAP009
Branch pipe “Outlet Cover” AB 400 GFDABC007
Shut-o󰀨 damper SKG-A 400 GSKSKG008
* Only transmitter Stouch is supported by a pressure transducer S - 1141

9
KF T120 EC
Door
Door replacement unit (EC fan
with an impeller and a connec-
tion box)
Door 1017 (KF 160) GPUD232_1017_1017
Door 1021 (KF 180) GPUD232_1021_1021
Door 1023 (KF 200) GPUD232_1023_1023
Door 1018 (KF 250) GPUD232_1018_1023
Door 1020 (KF 280) GPUD232_1020_1020
Door 1019 (KF 315) GPUD232_1019_1021
Door 1022 (KF 355) GPUD232_1022_1021
Door 1024 (KF 400) GPUD232_1024_1023

10
KF T120 EC
• All units are packed in the factory to withstand regular conditions of transportation.
• Upon unpacking, check the unit for any damages caused during transportation. It is forbidden to install damaged units!!!
• The package is only for protection purpose!
• While unloading and storing the units, use suitable lifting equipment to avoid damages and injuries. Do not lift units by holding on power supply
cables, connection boxes, air extract or exhaust anges. Avoid hits and shock overloads. Before installation units must be stored in a dry room with
the relative air humidity not exceeding 70% (at +20 °C) and with the average ambient temperature ranging between +5 °C and +30 °C. The place of
storage must be protected against dirt and water.
• The units must be transported to the storage or installation site using forklifts.
• The storage is not recommended for a period longer than one year. In case of storage longer than one year, before the installation it is necessary
to verify whether the bearings of fans and motor rotate easily (turn the impeller by hand) and if the electric circuit insulation is not damaged or the
moisture is accumulated.
• unpacking wear protective gloves.
• It is recommended to transport the product to the installation site in the original package.
• If you charge a person , pay attention to the weight of the product , which is written on the label.
KF-T120 F160/F180/F200 EC KF-T120 F250/F280/B315/B355/B400 EC
H1
H2
L1
L1
W1
W1
H1
H2
W1
W1
L1
L1
H1
H2
L1
L1
W1
W1
H1
H2
W1
W1
L1
L1
KF-T120 EC L1, mm L2, mm W1, mm W2, mm H1, mm H2,mm
F160/F180 500 500 510 510 2030 740
F200 540 540 535 535 2120 770
F250/F280/B315 745 745 725 725 1855 975
B355/B400 825 825 725 725 2165 1130

11
KF T120 EC
Control Accessories :
1. MTP010 regulator
2. Stouch panel
3. Stouch + S- 1141 *
** - Domestic use installed lters box
*** - For industrial use lters installed extractors
IP44/54 1.5A
+-
SPS
+
-
ModBus
Stouch MTP010
ON/OFF
S-1141*
AB/AGO/ALU*
NPU
RC-MAN-
PU
**
***
CEE7/7
SKG-A/RSK*
KF-T120 EC
Exhaust air Kitchen hood
AB/AGO/
ALU* Mount air outlet or protective ventilation grill SKG-A/ RSK* Mount a damper SKG-A or a back draft damper RSK.
NPU Coupling RC-MAN-PU Heat-proof exible connection
CEE7/7 Power cable with a plug ON/OFF On/o󰀨 switch
S-1141* Pressure sensor S-1141 can be used only with Stouch
controller Stouch Remote controller
MTP101 Controller ModBus Network module

12
KF T120 EC
• Fan bearings are maintenance-free.
• The suitable lter must be chosen by designer of ventilation system.
• Before cleaning, disconnect the supply voltage and block the switch to avoid accidental switching on.
• Wait until any mechanical movement stops, the motor cools down and connected capacitors (when used) discharge .
• Ensure that the fan and installed parts and accessories are rmly and tightly installed.
• Carefully clean the impeller to avoid changing the balance of impeller.
• For the fan cleaning do not use mechanical cleaners, compressed air or water stream, aggressive chemicals. When cleaning the fan, do not deform
the impeller, avoid moisture or water contact with electrical devices and equipments.
• After the maintenance work and when installing back to the air duct system, perform the same actions described in Installation and Start-up sections
and follow other requirements of this document.
• It’s recommended to use exible connections in order to reduce vibration on air duct system.
• Ensure safe access to the fan for maintenance works.
Z1
Z2
KF-T120 EC F160 F180 F200 F250 F280 B315 B355 B400
Z1 [mm] 630 680 720 850 920 980 1110 1090
Z2 [mm] 590 670 720 810 960 910 980 990

13
KF T120 EC
• Installation works may be performed only by trained and qualied personnel.
• The devices have rotating parts and are connected to the electricity. This may pose a risk to the human health and life. That is why safety require-
ments have to be followed while installing. If you have any doubts on the safety of the products installation and use, please contact the manufacturer
or its representative.
• Make sure that the electric power chain data complies with the data on the product label on the device case.
• In order to operate, the equipment must be connected to a power supply and 0-10V speed controller device according connection diagrams of the
specic model.
• Selected power cable has to match device power. It is connected to the electrical terminals X1 ( Fig . 1 ) or to the breaker ( available as an accessory
and mounted installer) . Control and power supply terminals of the cross-section area - 2.5 mm2.
• Fan 0-10 VDC control is connected to the electrical box terminals X1 ( Fig . 1 ) .
• Electricity is connected in accordance with current regulations.
• need to prevent water entering into the connection box.
• Use cables that comply with the currents , the stickers .
• Power Switch dry conditions
X1
Pic. 1 Electrical connection box
• The fan has to be connected according to the electric scheme which is described in this document and is shown under the electricity connection
switch cap.
• Before turning on, it is necessary to make sure that the electricity scheme in this document coincides with the scheme indicated under the electrical
circuit box cover. If they do not match, it is strictly prohibited to turn the device on and it is necessary to contact the manufacturer or its representative.
• The device must be connected to the power supply using the security features, for example, an automatic switch.
• Make sure that the grounding wire is connected.
• It is necessary to ensure minimal engine speed at which the reverse thrust valves (if any) open.
Cross-section of the power supply cable Protective device; automatic switch
[mm²] [A]
KF-T120 F 160 EC 3x1 1P, C2
KF-T120 F 180 EC 3x1 1P, C2
KF-T120 F 200 EC 3x1 1P, C2
KF-T120 F 250 EC 3x1 1P, C2
KF-T120 F 280 EC 4x1,5 3P, C6
KF-T120 B 315 EC 3x1 1P, C2
KF-T120 B 355 EC 3x1 1P, C2
KF-T120 B 400 EC 3x1 1P, C2
Selection of power supply cable and protective device

14
KF T120 EC
KF-T120 F 160 EC
(SP23-b)
KF-T120 F 180 EC, KF-T120 B 315 EC, KF-T120 B 355 EC
(SP25-b)
1
PE
-X1
2
1
N
2
1
L1
2
1
1
2
1
2
2
1
3
2
1
4
2
-M1
PE N L
Tacho
0-10V/PWM
GND +10V
SP23-b
Red
0.5
Yellow
0.5
Blue
0.5
White
0.5
Brown
1
Blue
1
Green-yellow
1
SP25-b
PE
N
L
NC
COM
0-10V/PWM
GND
+10V
-M1
PE
-X1
N L1 1 2 3 4 5
W1\green/yellow
W1\blue
W1\black
W1\white1 W1\white2
W2\yellow
W2\blue
W2\red
Red
0.5
Blue
0.5
Yellow
0.5
White
1
White
1
Brown
1
Blue
1
Green-yellow
1
KF-T120 F 200 EC, KF-T120 F 250 EC, KF-T120 B 400 EC
(SP26-b)
KF-T120 F280 EC
(SP27-b)
W1\green/yellow
W1\blue
W1\brown
SP26-b
W1\white1 W1\white2
W2\yellow
W2\blue
W2\red
1
PE
-X1
2
1
N
2
1
L1
2
1
1
2
1
2
2
1
3
2
1
4
2
1
5
2
PE
N
L
NC
COM
0-10V
GND
10V
-M1
Red
0.5
Blue
0.5
Yellow
0.5
White
1
White
1
Black
1
Blue
1
Green-yellow
1
1
PE
-X1
2
1
L1
2
1
L2
2
1
L3
2
1
1
2
1
2
2
1
3
2
1
4
2
1
5
2
W1\gr/ye
W1\black
W1\brown
W1\grey
W3\1 W3\2 W2\1 W2\2 W2\3
PE
1-L1
2-L2
3-L3
3-NC
2-COM
4-Ain1U(0-10V)
3-GND
5-+10V
-M1
SP27-b
Black
0.5
Black
0.5
Black
0.5
Black
0.5
Black
0.5
Grey
1.5
Brown
1.5
Black
1.5
Green-yellow
1.5
Fan connection diagram:

15
KF T120 EC
+-
SPS
+
-
IP44/54 1.5 A
CEE7/7
ModBus
CEE7/7
+-
SPS
CEE7/7
ModBus
+-
SPS
+
-
Connection of accessories
1. Fan – on/o󰀨 switch – 0-10 VDC speed controller
DATESIGNATURE
DRAWN BY
DUTIES / NAME
UAB"SALDA"
CHECKED BY
APPROVED BY
Drawing #
Book #
9321 1086 74 5
1
2
5
4
3
Priedų pajungimas
EI K. Vasiliauskas
1
EI D. Aleksandarvičius
SP25-b, SP26-b
01
2016-07-26
2016-07-26
1
4
2
1
3
2
1
2
2
1
5
2
N
Components and cables indicated in
dotted line should be connected by
the manufacturer or by the user.
L1
PE
PE
Q1
1
2
3
4
5
6
1
1
2
1
L1
2
1
N
2
1
PE
2
-F1
1
2
+10V
COM
NC
0-10V GND
L1 N PE
SP25-b SP26-b
Us-max. 12VDC/1mA + out - GND
MTP010
max. 4A/250VAC
10A/12VDC
KF T120 F160 EC - SP23-b
KF T120 F180 EC - SP25-b
KF T120 F315 EC - SP25-b
KF T120 B355 EC - SP25-b
KF T120 F200 EC - SP26-b
KF T120 F250 EC - SP26-b
KF T120 B400 EC - SP26-b
KF T120 F280 EC - SP27-b
-K1
A1
A2
-K1
1
2
3
4
PE
L1 N
-K1
A1
A2
-K1
1
2
3
4
-F1
1
2
+10V
1
5
2
1
L1
2
1
1
2
1
2
2
1
3
2
1
4
2
1
PE
2
1
N
2
PE N L1
GND
NC
COM
SP26-b SP25-b
0-10V
PE
Q1
1
2
3
4
5
6
+Vout GND
SMT-D-4P-EL
+Vin(max.1.1mA) GND
1 2 3 4
N L1
PE
-K1
A1
A2
-K1
1
2
3
4
-F1
1
2
GND
1
4
2
1
5
2
+10V
1
N
2
1
3
2
1
2
2
1
1
2
1
L1
2
PE
1
PE
2
COM
NC L1 N PE
0-10V
SP25-b SP26-b
Q1
1
2
3
4
5
6
-F4
1
2
-G1
L N PE
V+ V- PE
-Stouch
1-24VDC/AC 2-24VAC/DC 3- GND 4- RS465-B 5-RS485-A 6-GND 7-0-10VDC IN 8-0-10VDC OUT
CON1
1 2
3 4
5 6
-K1
1 2
3 4
5 6
-K1
1 2
3 4
5 6
-K1
Vin GND A B AO1 GND
-S-1141
-F3
1
2
Pastabos:
1. Priskirk komponenetus iš bibliotekos kad matytųsi pajungimo gnybtų numeracija.
Document realized with version :
02
+SP25
Priedų pajungimas
232.1017
EI D. Aleksandarvičius EI K. Vasiliauskas
0
2015.0.5.17
DRAWN BY CHECKED BY
dariusaleksandravici0 2016-07-18
SOLIDWORKS Electrical
Us-max. 12VDC/1mA + out - GND
MTP010
max. 4A/250VAC
10A/12VDC
-K2
A1
A2
0-10V
GND COM
1
4
2
1
3
2
1
2
2
1
5
2
+10V L1 L3 L2
1
L2
2
1
L1
2
1
L3
2
NC
1
1
2
PE
L2 L1
PE
SP27-b
Q2
1
2
3
4
5
6
-K2
1
2
3
4
5
6
PE
1
PE
2
1
2
3
4
5
6
-F2
L3
1 2
3 4
5 6
-K2
+10V
1
5
2
1
3
2
1
4
2
GND
0-10V
L3 L1 L2
1
2
3
4
5
6
-F2
-K2
A1
A2
-K2
1
2
3
4
5
6
Q2
1
2
3
4
5
6
PE
PE
1
1
2
NC
1
L3
2
1
L2
2
L2 L3
1
2
2
COM
1
PE
2
PE
SP27-b
1
L1
2
L1
1 2
3 4
5 6
-K2
+Vout GND
SMT-D-4P-EL
+Vin(max.1.1mA) GND
1 2 3 4
N
N
1
5
2
+10V
L2 L3
-K2
A1
A2
N PE
PE
Q2
1
2
3
4
5
6
-K2
1
2
3
4
5
6
1
2
3
4
5
6
-F2
L1
COM
1
2
2
L3
1
L3
2
NC
1
1
2
0-10V
1
3
2
L1
1
L1
2
SP27-b
PE
1
PE
2
L2
1
L2
2
GND
1
4
2
1 2
3 4
5 6
-K2
-F5
1
2
-Stouch
1-24VDC/AC 2-24VAC/DC 3- GND 4- RS465-B 5-RS485-A 6-GND 7-0-10VDC IN 8-0-10VDC OUT
CON1
Vin GND A B AO1 GND
-S-1141
-G2
L N PE
V+ V- PE
-F6
1
2
Document realized with version :
03
+SP25
Priedų pajungimas
232.1017
EI D. Aleksandarvičius EI K. Vasiliauskas
0
2015.0.5.17
DRAWN BY CHECKED BY
dariusaleksandravici0 2016-07-19
SOLIDWORKS Electrical
1
4
2
1
3
2
1
1
2
1
L1
2
1
N
2
1
PE
2
1
2
2
GND
+10V
Tacho
L1 N PE
0-10V
PE
L1 N
-F7
1
2
-F8
1
2
PE
Q3
1
2
3
4
5
6
-Stouch
1-24VDC/AC 2-24VAC/DC 3- GND 4- RS465-B 5-RS485-A 6-GND 7-0-10VDC IN 8-0-10VDC OUT
CON1
-G3
L N PE
V+ V- PE
Vin GND A B AO1 GND
-S-1141
-F3
1
2
N L1
PE
PE
L1 N
PE
Q3
1
2
3
4
5
6
-K3
A1
A2
PE
-K3
1
2
3
4
Q3
1
2
3
4
5
6
-F3
1
2
Us-max. 12VDC/1mA + out - GND
MTP010
max. 4A/250VAC
10A/12VDC
-F3
1
2
+Vout GND
SMT-D-4P-EL
+Vin(max.1.1mA) GND
1 2 3 4
1 2
3 4
5 6
-K3
+10V
GND
1
3
2
1
4
2
0-10V
N L1
Tacho
1
N
2
1
L1
2
1
1
2
1
2
2
PE
1
PE
2
1
2
2
1
1
2
0-10V
1
4
2
1
3
2
GND
+10V
1
PE
2
PE
1
N
2
L1 N
1
L1
2
Tacho
SP23-b
SP23-b
SP23-b
Electrical connection
- With speed controller MTP010, which allows to select fan speed from 0-100%. Controller position at 0 turns the device o󰀨.

16
KF T120 EC
- With speed controller SMT-D-4P-EL, which allows to select 3 speeds. These speeds can be adjusted according user needs.
0 – position “Stop”;
1 – position 3-6 VDC/100 mA;
2 – position 6-8 VDC/100 mA;
3 – position 10V (supply voltage)/100 mA.
DATESIGNATURE
DRAWN BY
DUTIES / NAME
UAB"SALDA"
CHECKED BY
APPROVED BY
Drawing #
Book #
9321 1086 74 5
1
2
5
4
3
Priedų pajungimas
EI K. Vasiliauskas
1
EI D. Aleksandarvičius
SP25-b, SP26-b
01
2016-07-26
2016-07-26
1
4
2
1
3
2
1
2
2
1
5
2
N
Components and cables indicated in
dotted line should be connected by
the manufacturer or by the user.
L1
PE
PE
Q1
1
2
3
4
5
6
1
1
2
1
L1
2
1
N
2
1
PE
2
-F1
1
2
+10V
COM
NC
0-10V GND
L1 N PE
SP25-b SP26-b
Us-max. 12VDC/1mA + out - GND
MTP010
max. 4A/250VAC
10A/12VDC
KF T120 F160 EC - SP23-b
KF T120 F180 EC - SP25-b
KF T120 F315 EC - SP25-b
KF T120 B355 EC - SP25-b
KF T120 F200 EC - SP26-b
KF T120 F250 EC - SP26-b
KF T120 B400 EC - SP26-b
KF T120 F280 EC - SP27-b
-K1
A1
A2
-K1
1
2
3
4
PE
L1 N
-K1
A1
A2
-K1
1
2
3
4
-F1
1
2
+10V
1
5
2
1
L1
2
1
1
2
1
2
2
1
3
2
1
4
2
1
PE
2
1
N
2
PE N L1
GND
NC
COM
SP26-b SP25-b
0-10V
PE
Q1
1
2
3
4
5
6
+Vout GND
SMT-D-4P-EL
+Vin(max.1.1mA) GND
1 2 3 4
N L1
PE
-K1
A1
A2
-K1
1
2
3
4
-F1
1
2
GND
1
4
2
1
5
2
+10V
1
N
2
1
3
2
1
2
2
1
1
2
1
L1
2
PE
1
PE
2
COM
NC L1 N PE
0-10V
SP25-b SP26-b
Q1
1
2
3
4
5
6
-F4
1
2
-G1
L N PE
V+ V- PE
-Stouch
1-24VDC/AC 2-24VAC/DC 3- GND 4- RS465-B 5-RS485-A 6-GND 7-0-10VDC IN 8-0-10VDC OUT
CON1
1 2
3 4
5 6
-K1
1 2
3 4
5 6
-K1
1 2
3 4
5 6
-K1
Vin GND A B AO1 GND
-S-1141
-F3
1
2
Pastabos:
1. Priskirk komponenetus iš bibliotekos kad matytųsi pajungimo gnybtų numeracija.
Document realized with version :
03
+SP25
Priedų pajungimas
232.1017
EI D. Aleksandarvičius EI K. Vasiliauskas
0
2015.0.5.17
DRAWN BY CHECKED BY
dariusaleksandravici0 2016-07-19
SOLIDWORKS Electrical
1
4
2
1
3
2
1
1
2
1
L1
2
1
N
2
1
PE
2
1
2
2
GND
+10V
Tacho
L1 N PE
0-10V
PE
L1 N
-F7
1
2
-F8
1
2
PE
Q3
1
2
3
4
5
6
-Stouch
1-24VDC/AC 2-24VAC/DC 3- GND 4- RS465-B 5-RS485-A 6-GND 7-0-10VDC IN 8-0-10VDC OUT
CON1
-G3
L N PE
V+ V- PE
Vin GND A B AO1 GND
-S-1141
-F3
1
2
N L1
PE
PE
L1 N
PE
Q3
1
2
3
4
5
6
-K3
A1
A2
PE
-K3
1
2
3
4
Q3
1
2
3
4
5
6
-F3
1
2
Us-max. 12VDC/1mA + out - GND
MTP010
max. 4A/250VAC
10A/12VDC
-F3
1
2
+Vout GND
SMT-D-4P-EL
+Vin(max.1.1mA) GND
1 2 3 4
1 2
3 4
5 6
-K3
+10V
GND
1
3
2
1
4
2
0-10V
N L1
Tacho
1
N
2
1
L1
2
1
1
2
1
2
2
PE
1
PE
2
1
2
2
1
1
2
0-10V
1
4
2
1
3
2
GND
+10V
1
PE
2
PE
1
N
2
L1 N
1
L1
2
Tacho
SP23-b
SP23-b SP23-b
Document realized with version :
02
+SP25
Priedų pajungimas
232.1017
EI D. Aleksandarvičius EI K. Vasiliauskas
0
2015.0.5.17
DRAWN BY CHECKED BY
dariusaleksandravici0 2016-07-18
SOLIDWORKS Electrical
Us-max. 12VDC/1mA + out - GND
MTP010
max. 4A/250VAC
10A/12VDC
-K2
A1
A2
0-10V
GND COM
1
4
2
1
3
2
1
2
2
1
5
2
+10V L1 L3 L2
1
L2
2
1
L1
2
1
L3
2
NC
1
1
2
PE
L2 L1
PE
SP27-b
Q2
1
2
3
4
5
6
-K2
1
2
3
4
5
6
PE
1
PE
2
1
2
3
4
5
6
-F2
L3
1 2
3 4
5 6
-K2
+10V
1
5
2
1
3
2
1
4
2
GND
0-10V
L3
L1 L2
1
2
3
4
5
6
-F2
-K2
A1
A2
-K2
1
2
3
4
5
6
Q2
1
2
3
4
5
6
PE
PE
1
1
2
NC
1
L3
2
1
L2
2
L2 L3
1
2
2
COM
1
PE
2
PE
SP27-b
1
L1
2
L1
1 2
3 4
5 6
-K2
+Vout GND
SMT-D-4P-EL
+Vin(max.1.1mA) GND
1 2 3 4
N
N
1
5
2
+10V
L2 L3
-K2
A1
A2
N PE
PE
Q2
1
2
3
4
5
6
-K2
1
2
3
4
5
6
1
2
3
4
5
6
-F2
L1
COM
1
2
2
L3
1
L3
2
NC
1
1
2
0-10V
1
3
2
L1
1
L1
2
SP27-b
PE
1
PE
2
L2
1
L2
2
GND
1
4
2
1 2
3 4
5 6
-K2
-F5
1
2
-Stouch
1-24VDC/AC 2-24VAC/DC 3- GND 4- RS465-B 5-RS485-A 6-GND 7-0-10VDC IN 8-0-10VDC OUT
CON1
Vin GND A B AO1 GND
-S-1141
-G2
L N PE
V+ V- PE
-F6
1
2

17
KF T120 EC
2. Fan speed control by a remote controller or/and a PC via Modbus (see Stouch manual)
+-
SPS
+
-
IP44/54 1.5 A
CEE7/7
ModBus
CEE7/7
+-
SPS
CEE7/7
ModBus
+-
SPS
+
-
3. Constant pressure adjustment by a remote controller or/and a PC via Modbus (see Stouch manual)
+-
SPS
+
-
IP44/54 1.5 A
CEE7/7
ModBus
CEE7/7
+-
SPS
CEE7/7
ModBus
+-
SPS
+
-

18
KF T120 EC
Electrical connection
Document realized with version :
03
+SP25
Priedų pajungimas
232.1017
EI D. Aleksandarvičius EI K. Vasiliauskas
0
2015.0.5.17
DRAWN BY CHECKED BY
dariusaleksandravici0 2016-07-19
SOLIDWORKS Electrical
1
4
2
1
3
2
1
1
2
1
L1
2
1
N
2
1
PE
2
1
2
2
GND
+10V
Tacho
L1 N PE
0-10V
PE
L1 N
-F7
1
2
-F8
1
2
PE
Q3
1
2
3
4
5
6
-Stouch
1-24VDC/AC 2-24VAC/DC 3- GND 4- RS465-B 5-RS485-A 6-GND 7-0-10VDC IN 8-0-10VDC OUT
CON1
-G3
L N PE
V+ V- PE
Vin GND A B AO1 GND
-S-1141
-F3
1
2
N L1
PE PE
L1 N
PE
Q3
1
2
3
4
5
6
-K3
A1
A2
PE
-K3
1
2
3
4
Q3
1
2
3
4
5
6
-F3
1
2
Us-max. 12VDC/1mA + out - GND
MTP010
max. 4A/250VAC
10A/12VDC
-F3
1
2
+Vout GND
SMT-D-4P-EL
+Vin(max.1.1mA) GND
1 2 3 4
1 2
3 4
5 6
-K3
+10V
GND
1
3
2
1
4
2
0-10V
N L1
Tacho
1
N
2
1
L1
2
1
1
2
1
2
2
PE
1
PE
2
1
2
2
1
1
2
0-10V
1
4
2
1
3
2
GND
+10V
1
PE
2
PE
1
N
2
L1 N
1
L1
2
Tacho
SP23-b SP23-b
SP23-b
DATESIGNATURE
DRAWN BY
DUTIES / NAME
UAB"SALDA"
CHECKED BY
APPROVED BY
Drawing #
Book #
9321 1086 74 5
1
2
5
4
3
Priedų pajungimas
EI K. Vasiliauskas
1
EI D. Aleksandarvičius
SP25-b, SP26-b
01
2016-07-26
2016-07-26
1
4
2
1
3
2
1
2
2
1
5
2
N
Components and cables indicated in
dotted line should be connected by
the manufacturer or by the user.
L1
PE
PE
Q1
1
2
3
4
5
6
1
1
2
1
L1
2
1
N
2
1
PE
2
-F1
1
2
+10V
COM
NC
0-10V GND
L1 N PE
SP25-b SP26-b
Us-max. 12VDC/1mA + out - GND
MTP010
max. 4A/250VAC
10A/12VDC
KF T120 F160 EC - SP23-b
KF T120 F180 EC - SP25-b
KF T120 F315 EC - SP25-b
KF T120 B355 EC - SP25-b
KF T120 F200 EC - SP26-b
KF T120 F250 EC - SP26-b
KF T120 B400 EC - SP26-b
KF T120 F280 EC - SP27-b
-K1
A1
A2
-K1
1
2
3
4
PE
L1 N
-K1
A1
A2
-K1
1
2
3
4
-F1
1
2
+10V
1
5
2
1
L1
2
1
1
2
1
2
2
1
3
2
1
4
2
1
PE
2
1
N
2
PE N L1
GND
NC
COM
SP26-b SP25-b
0-10V
PE
Q1
1
2
3
4
5
6
+Vout GND
SMT-D-4P-EL
+Vin(max.1.1mA) GND
1 2 3 4
N L1
PE
-K1
A1
A2
-K1
1
2
3
4
-F1
1
2
GND
1
4
2
1
5
2
+10V
1
N
2
1
3
2
1
2
2
1
1
2
1
L1
2
PE
1
PE
2
COM
NC L1 N PE
0-10V
SP25-b SP26-b
Q1
1
2
3
4
5
6
-F4
1
2
-G1
L N PE
V+ V- PE
-Stouch
1-24VDC/AC 2-24VAC/DC 3- GND 4- RS465-B 5-RS485-A 6-GND 7-0-10VDC IN 8-0-10VDC OUT
CON1
1 2
3 4
5 6
-K1
1 2
3 4
5 6
-K1
1 2
3 4
5 6
-K1
Vin GND A B AO1 GND
-S-1141
-F3
1
2
Pastabos:
1. Priskirk komponenetus iš bibliotekos kad matytųsi pajungimo gnybtų numeracija.

19
KF T120 EC
Document realized with version :
02
+SP25
Priedų pajungimas
232.1017
EI D. Aleksandarvičius EI K. Vasiliauskas
0
2015.0.5.17
DRAWN BY CHECKED BY
dariusaleksandravici0 2016-07-18
SOLIDWORKS Electrical
Us-max. 12VDC/1mA + out - GND
MTP010
max. 4A/250VAC
10A/12VDC
-K2
A1
A2
0-10V
GND COM
1
4
2
1
3
2
1
2
2
1
5
2
+10V L1 L3 L2
1
L2
2
1
L1
2
1
L3
2
NC
1
1
2
PE
L2 L1
PE
SP27-b
Q2
1
2
3
4
5
6
-K2
1
2
3
4
5
6
PE
1
PE
2
1
2
3
4
5
6
-F2
L3
1 2
3 4
5 6
-K2
+10V
1
5
2
1
3
2
1
4
2
GND
0-10V
L3 L1 L2
1
2
3
4
5
6
-F2
-K2
A1
A2
-K2
1
2
3
4
5
6
Q2
1
2
3
4
5
6
PE
PE
1
1
2
NC
1
L3
2
1
L2
2
L2 L3
1
2
2
COM
1
PE
2
PE
SP27-b
1
L1
2
L1
1 2
3 4
5 6
-K2
+Vout GND
SMT-D-4P-EL
+Vin(max.1.1mA) GND
1 2 3 4
N N
1
5
2
+10V
L2 L3
-K2
A1
A2
N PE
PE
Q2
1
2
3
4
5
6
-K2
1
2
3
4
5
6
1
2
3
4
5
6
-F2
L1
COM
1
2
2
L3
1
L3
2
NC
1
1
2
0-10V
1
3
2
L1
1
L1
2
SP27-b
PE
1
PE
2
L2
1
L2
2
GND
1
4
2
1 2
3 4
5 6
-K2
-F5
1
2
-Stouch
1-24VDC/AC 2-24VAC/DC 3- GND 4- RS465-B 5-RS485-A 6-GND 7-0-10VDC IN 8-0-10VDC OUT
CON1
Vin GND A B AO1 GND
-S-1141
-G2
L N PE
V+ V- PE
-F6
1
2
Pressure sensor connection on the ducting. 2 possible variants.
a) The hose with “-“ must be connected before the fan. The hose with “+” measures atmospheric pressure.
+-
SPS
+
-
IP44/54 1.5 A
CEE7/7
ModBus
CEE7/7
+-
SPS
CEE7/7
ModBus
+-
SPS
+
-
Exhaust air Kitchen hood

20
KF T120 EC
b) The hose with “-“ must be connected on the ducting before the fan. The hose with “+” must be connected after the fan.
• The device can be started only by qualied and trained personnel.
• Before starting the device, make sure that the power chain matches the data on the label.
• Before starting the device, make sure that the device is connected to the power source in accordance with the scheme shown in this document and
under the electricity connection switch cap.
• Before starting the device, make sure that all the above listed security and installation instructions are arranged.
• When the device is started, make sure that the engine rotates evenly, does not vibrate and does not emit strange noise.
• Make sure, that there’s no foreign object in the fan before the launching.
• Make sure, that all the bolts and nuts are tightened before the launching.
• Installation works can only be performed by trained and qualied personnel.
• The device should be mounted rmly and rigidly so it’s safe use would be ensured.
• The device can be connected to pull the air from the air duct system
• It is necessary to ensure protection from contacting working fan impeller (for this, specially produced accessories or required air duct length is used)
• Do not connect elbows close to the fan.
• When connecting the air ducts, pay attention to the air ow direction indicated on the device case.
• It is necessary to use grease lters which reduce the accumulation of dirt on the fan impeller. Accumulated dirt misbalances the impeller and vibra-
tions appear. This can cause engine failure.
• After the maintenance works and during the mounting back to the ducting, it’s necessary to perform the same steps as mentioned in the “Installation”
and “Start-up” section and to comply with the requirements in this manual.
• Stainless steel drip tray for fats is designed for the drainage of uids, what accumulates inside the casing.
+-
SPS
+
-
IP44/54 1.5 A
CEE7/7
ModBus
CEE7/7
+-
SPS
CEE7/7
ModBus
+-
SPS
+
-