Salvus L1 User manual

Salvus L1 lithium-ion
safes manual
Version 3.1-2023

Contents
1. General safety advice ...................................................................................................................... 4
2. Guarantee........................................................................................................................................ 4
3. Transport......................................................................................................................................... 4
4. Putting the safe into service............................................................................................................ 5
Installation........................................................................................................................................... 5
Switching on the safe .......................................................................................................................... 5
Opening and closing the safe door...................................................................................................... 5
5. Storing and charging batteries ........................................................................................................ 6
6. Earthing ........................................................................................................................................... 6
7. Ventilation....................................................................................................................................... 6
8. Opening the safe after a fire ........................................................................................................... 6
9. Explanation of the signals................................................................................................................ 7
10. Maintenance, service and faults ....................................................................................................... 8
Appendix 1: safe fittings.......................................................................................................................... 9
Models with eight charging points...................................................................................................... 9
Models with ten charging points....................................................................................................... 10
Appendix 2: Wiring diagram.................................................................................................................. 11
Appendix 3: Declaration of compliance ................................................................................................ 12

Dear User,
Congratulations with the purchase of your lithium-ion safe. Please read this manual
carefully before use. At the end you fill find various appendices with safety information.
Keep the manual and this additional information for reference.
For optimal performance and long-term functionality and to ensure the safety and security of the
safe, we recommend regular maintenance.
If you have any questions about your Salvus lithium-ion safe or in the unlikely event of a
malfunction, please get in touch with the Nauta Service Team.
Yours faithfully, The
Nauta Service Team

1. General safety advice
•Please read the entire manual before you start using the safe. Incorrect use and failure to
heed warnings and follow instructions may lead to serious injury.
•This safe is intended for storing and charging lithium-ion and other batteries. Only use
original manufacturers’ batteries and heed all warnings, instructions, illustrations and
information supplied with the battery.
•Never change the safe settings yourself, always contact the Nauta Service Team.
•Only allow qualified and skilled personnel to repair the electrical system and only allow those
repairs to be undertaken with original parts.
•The service hatch must only be opened for safety and security inspections and only by the
Nauta Service Team and qualified, skilled personnel.
•Always keep the safe door closed so that any fire is limited to inside the safe.
•Never open the safe door yourself if the alarm sounds. Telephone the emergency services
and leave it to the fire brigade to open the safe.
•Never impede the smoke duct and the ventilation grill by placing anything on top of the safe.
•Place the safe in a well-ventilated room. In the event of a fire, poisonous gases may be
discharged.
•Ensure that no unauthorised person who has not been instructed in the safe’s use gains
access to it.
•A CEE-form plug is attached to the lithium-ion battery safe. Ensure that the voltage of the
electricity source corresponds with that of the plug.
•Never exceed the maximum amperage indicated.
•Only use original, undamaged cables and plugs for charging batteries.
•Plug the charger directly into the charging point in the safe and never into a multiple socket
and/or extension cable.
•Make sure that the fuse switch in the safe is up (position 1). The fuse switch is inside the safe
on the outside of the lowest technical compartment.
2. Guarantee
The manufacturer Nauta provides a warranty period of 24 months from the date of delivery on the
safes specified in the manual.
3. Transport
Move the safe in an upright position with a pallet truck. We recommend that you have the safe
placed in its intended location by a specialist company.
Improper transport may lead to hidden damage to safes and to their fire proofing and fire protection.

4. Putting the safe into service
Installation
•Place the safe on a firm surface and ensure that it is level.
•The safe cannot tip over and fall due to its heavy weight.
•Place the safe where the door can open 180°.
•Ensure that the safe is in a well-ventilated room. Depending on its duration, a fire may produce
poisonous gasses.
Switching on the safe
•On the outside of the safe is an electricity cable approx. 1.5 metres long that is fitted with a
three-pole CEE-form 230V 16A plug as standard. Push the plug directly into a compatible wall
socket. Do not use an extension cable.
•Ensure that the safe cable is connected to an exclusive circuit in accordance with NEN
regulations.
•Make sure that the fuse switch in the safe is up (position 1). The fuse switch is inside the safe
on the outside of the lowest technical compartment.
•Ensure that the maximum power of the safe (3600W) is never exceeded.
•Ensure that the maximum load-bearing capacity of the shelves of approx. 60 kg is never
exceeded.
•Always keep the safe door closed so that any fire is limited to inside the safe.
•Never impede the smoke duct and the ventilation grill by placing anything on top of the safe.
Opening and closing the safe door
Opening the safe door
•Turn the handle to the open position.
•Open the door as far as possible without forcing until it stays open.
Closing the safe door
•Turn the handle to the closed position.
•If the door remains open, an alarm will sound after two minutes to indicate that the door must
be closed.
•Closing the door is entirely mechanical and requires very little force from the locking
mechanism. There is therefore very little risk involved and there is little danger of injury.

5. Storing and charging batteries
The Salvus lithium-ion safe provides 230V of electricity to charge the batteries in it. Never exceed the
maximum amperage indicated.
Total power per charging point:
Maximum voltage
230V
Fuse
16A
Maximum power
3600W
Safe charging:
•Use the battery’s original charger only.
•Use the charging points as installed in the safe only.
•On no account use multiple sockets and/or extension cables.
•The safe can only work properly and safely and securely if the door is kept closed.
6. Earthing
An earthing connection may be required depending on the client-specific use of the Salvus
lithium-ion safe. Seek advice from qualified and skilled personnel.
7. Ventilation
•Ensure that the safe is in a well-ventilated room. Depending on its duration, a fire may produce
poisonous gasses.
•The safe is installed with a mechanically ventilated smoke duct so that smoke and gasses that
are produced by any battery fire can be carried away safely.
8. Opening the safe after a fire
•Never open the safe door yourself if the alarm sounds. On models where they are installed,
warning lamps will also light up. Telephone the emergency services and leave it to the fire
brigade to open the safe.
•Be warned! Depending on its duration, a fire may produce poisonous gasses.
•Telephone the Nauta Service Team once the fire has been extinguished so that the safe can be
inspected to see if it can continue to be used.
•For advice as to the disposal of damaged batteries, contact the manufacturer.

9. Explanation of the signals
Loud alarm (door open)
Door open for more than 2 minutes
Close the door
Loud alarm (emergency)
Call the emergency services!
Do not open the safe!
Calamity resolved?
Call Nauta Service Team, [phone]

10. Maintenance, service and faults
Maintenance and service
It is advisable to service Salvus lithium-ion safes once a year. Telephone the Nauta Service
Team to make an appointment.
Faults
Repairs may incur costs if a problem falls outside of the guarantee. If your appointment cannot
take place for some reason or if it is no longer necessary, get in touch with us as soon as possible
on +31 (0)342 - 455000 to cancel it. We can then make a new appointment in consultation with you
if necessary. You will be charged the cost of the visit if you are not present at the agreed time or if
the appointment is cancelled less than 24 hours in advance.
For the most up-to-date service charges, please contact us.

Appendix 1: safe fittings
Models with eight charging points
1
Ventilation
2
Shelf
3
Technical compartment
4
Lamp
5
Charging point
6
Automatic charging system
7
Alarm
8
Smoke alarm
9
CEE-form plug

Models with ten charging points
1
Ventilation
2
Shelf
3
Technical compartment
4
Lamp
5
Charging point
6
Automatic charging system
7
Alarm
8
Smoke alarm
9
CEE-form plug

Appendix 2: Wiring diagram

Appendix 3: Declaration of compliance