Samlexpower samlexsolar SPB-EXPLORE200 User manual

SPB-ENJOY-600 Installation
CFB2
10W Battery
Maintainer
DC-3500-KIT
Battery
AC
Input
EVO-RC-PLUS
Remote
AC Distribution
Panel
(Not included)
200W Solar Panels
EVO-30AB
Solar Charge
Controller
EVO-3012
EQUALIZATION
Push & Hold 5 sec: Start
Push & Hold 2 sec: Stop
PV+
PV–
BAT+
BAT–
BTS+
BTS –
Bulk/Absorption
Float
Equalization
TempFault
Fault
STATUS
Model
EVO-30AB
PWM Solar
Charge Controller
2x
SBC-2-DC
ATC
Inline Fuse
20’ of #12 AWG Cable
supplied with each
Solar Panel Kit
Cable set with
ATC-30A Fuse,
5’ #10 AWG
Toll Free Numbers
Ph: 1 800 561 5885
Fax: [phone]
Local Numbers
Ph: 604 525 3836
Fax: [phone]
samlexamerica.com
USA Shipping Warehouses
Kent, WA
Plymouth, MI
Canadian Shipping Warehouse
Richmond, BC
11013-SPB-Installation Guide-0823
Contact Information
SOLAR POWER BUNDLES | Installation Guide
Installation
Guide
Solar + Power
Bundles
Models:
SPB-EXPLORE200
SPB-SHARE400
SPB-ENJOY600
Thank you for purchasing the Samlex Solar Power Bundle. We know you will enjoy many years of great service
from this quality state-of-the-art product. Samlex Customer Service and Application Engineers are available to
assist you with installation, setup, or operating instructions.
The Solar Power Bundle is highly congurable for many different and specic applications. To get you up and
running quickly, we have created this simple overview Reference Guide to assist you with the basic setup
procedures so that you may later congure for your specic needs.
Install Instructions
Read all Manuals prior to Install
1.Check all materials in your kit
2.Plan your system
• Location for all products
- Cable and connections between all products
- Refer to wiring diagram
3.Install Solar Panels
4.Install Charge Controller
5.Install Inverter
6.Install Fuse
7.Install Transfer Switch - Electrician required to conduct work
WARNING!
• If there are any items of the Reference Manual that you do not understand, do not attempt to install the unit
yourself. For a safe and code compliant installation, consult a Certied Electrician that is familiar with Local and
National electrical codes, proper installation of solar panels, and the design of alternative energy systems.
• All electrical systems both DC and AC must be disconnected from the source during the installation.
• Use of insolated tools is recommended.

SPB-EXPLORE200 Includes: Reference Manual
1SRV-200-30A Solar Charging Kit, 200 Watts with 30A Charge Controller SCC-30AB Manual
1NTX-1500-12 Pure Sine Wave Inverter, 1500 Watts NTX-1500-12 Manual
1STS-30 Transfer Switch with Inverter Quick Connect 30 Amps STS-30 Manual
1DC-2500-KIT 2500W Inverter Install Kit: (1) 300A fuse assembly (includes fuse), (1) 10 Ft
AWG# 2/0 Positive Cable, (1) 10 Ft AWG# 2/0 Negative Cable
DC-2500-KIT and NTX-1500-12
Manuals
1SC-05 5W SunCharger Battery Maintainer SC-05 Manual
1ATM-HOLDER Inline Fuse Holder for #12 Awg Cable SCC-30AB Manual
1ATM 30A FUSE ATM Type 30A Fuse for #12 Awg Cable SCC-30AB Manual
SPB-SHARE400 Includes: Reference Manual
2SSP-200-KIT Solar Panel Kit, 200 Watts with cables, connectors and mounting brackets EVO-30AB Manual
1EVO-30AB Solar Charge Controller, 12/24V, PWM, 30 Amp EVO-30AB Manual
1EVO-2212 Inverter/Charger Input: 12VDC Output: 120VAC 2200 Watt c/w 100 Amp
Charger
EVO Quickstart Guide and Manual
1EVO-RC-PLUS Remote control for EVO Inverter Charger 1212F, 1212F-HW, 1224F, 1224F-HW EVO-RC-PLUS Manual
1SBC-2-DC Solar Panel Branch Connectors: (1) Female Connector, (1) Male Connector EVO-30AB Manual
1DC-2500-KIT 2500W Inverter Install Kit: (1) 300A fuse assembly (includes fuse), (1) 10 Ft
AWG# 2/0 Positive Cable, (1) 10 Ft AWG# 2/0 Negative Cable
DC-2500-KIT and EVO-2212
Manuals
1SC-10 10 W Sun Charger Battery Maintainer SC-10 Manual
1Cable Set, 5’ #10 Awg Cable Set, Red & Black 5ft, #10 Awg with ATC 30A Fuse EVO-30AB Manual
SPB-ENJOY600 Includes: Reference Manual
3SSP-200-KIT Solar Panel Kit, 200 Watts with cables, connectors and mounting brackets EVO-30AB Manual
1EVO-30AB Solar Charge Controller, 12/24V, PWM, 30 Amp EVO-30AB Manual
1EVO-3012 Inverter/Charger Input: 12VDC Output: 120VAC 3000 Watt c/w 130 Amp
Charger
EVO Quickstart Guide and Manual
1EVO-RC-PLUS Remote control for EVO Inverter Charger 1212F, 1212F-HW, 1224F, 1224F-HW EVO-RC-PLUS Manual
2SBC-2-DC Solar Panel Branch Connectors: (1) Female Connector, (1) Male Connector EVO-30AB Manual
1DC-3500-KIT 2500W Inverter Install Kit: (1) 300A fuse assembly (includes fuse), (1) 10 Ft
AWG# 2/0 Positive Cable, (1) 10 Ft AWG# 2/0 Negative Cable
DC-2500-KIT and EVO Manuals
1SC-10 10 W Sun Charger Battery Maintainer SC-10 Manual
1Cable Set, 5’ #10 Awg Cable Set, Red & Black 5ft, #10 Awg with ATC 30A Fuse EVO-30AB Manual
• Contact your supplier if any of the items are missing. If any damage is observed, do not proceed with the installation.
• Check that the model and specications are correct (e.g. 12 or 24 Volt battery system, AC voltage and output power
meets the load requirements).
Read the entire Owner’s Manuals of each of the products included in the Solar Power Bundle.
• Familiarize yourself with its contents prior to installation or operation. This Guide will frequently refer to specic pages in the
Owner’s Manual for detailed information.
• Plan mounting locations and wiring in accordance with codes and directions from each product’s manual.
SOLAR POWER BUNDLES | Installation Guide
SPB-EXPLORE-200 Installation
ON/OFF
Model
NTX-RC
Inverter Remote
MRBF
ATM
Inline Fuse
5W Battery
Maintainer
NTX-1500-12
DC-2500-KIT
Battery
AC
Input
NTX-RC
Remote AC Distribution
Panel
(Not included)
STS-30
Transfer Switch
200W Solar Panel
SCC-30AB
Solar Charge
Controller
20’ of #12 AWG Cable
supplied with each
Solar Panel Kit
SPB-SHARE-400 Installation
MRBF
10W Battery
Maintainer
DC-2500-KIT
Battery
AC
Input
EVO-RC-PLUS
Remote
AC Distribution
Panel
(Not included)
200W Solar Panels
EVO-30AB
Solar Charge
Controller
EVO-2212
EQUALIZATION
Push & Hold 5 sec: Start
Push & Hold 2 sec: Stop
PV+
PV–
BAT+
BAT–
BTS+
BTS –
Bulk/Absorption
Float
Equalization
TempFault
Fault
STATUS
Model
EVO-30AB
PWM Solar
Charge Controller
SBC-2-DC
ATC
Inline Fuse
20’ of #12 AWG Cable
supplied with each
Solar Panel Kit
Cable set with
ATC-30A Fuse,
5’ #10 AWG
SOLAR POWER BUNDLES | Installation Guide