Samsung AQ07XLN User manual

AQ07X Series
AQ09X Series
✴
✴
75'4ŏ5/#07#.
Split-type Air Conditioner
E••HNIK A
DB98-28220AER
(Cooling and Heating)

"
5CHGV[2TGECWVKQPU
6JGHQNNQYKPIUCHGV[RTGECWVKQPUOWUVDGVCMGPYJGPWUKPI[QWTCKTEQPFKVKQPGT
9#40+0)
4KUMQHGNGEVTKEUJQEMŖ%CPECWUGKPLWT[QTFGCVJŖ&KUEQPPGEVCNN
TGOQVGGNGEVTKERQYGTUWRRNKGUDGHQTGUGTXKEKPIKPUVCNNKPIQTENGCPKPI
Ŗ6JKUOWUVDGFQPGD[VJGOCPWHCEVWTGTQTKVUUGTXKEGCIGPVQTCUKOKNCT
SWCNKHKGFRGTUQPKPQTFGTVQCXQKFCJC\CTF
&74+0)12'4#6+10 X
 7UGTUQHVJKURTQFWEVCTGECWVKQPGFPQVVQCVVGORVTGRCKTQHVJKURTQFWEV
CVVJGKTQYPFKUETGVKQP+PUVGCFVJG[CTGTGSWGUVGFVQFKTGEVN[EQPVCEVC
FGUKIPCVGFUGTXKEGEGPVGTQTVJGQWVNGVCVYJKEJVJGRTQFWEVYCU
RWTEJCUGF
X  0GXGTURKNNCP[MKPFQHNKSWKFKPVQVJGWPKV5JQWNFVJKUJCRRGPWPRNWI
QTOCKPUYKVEJQHHVJGWPKVCPFEQPVCEVCPCWVJQTK\GFUGTXKEGEGPVGT
X  &QPQVKPUGTVCP[VJKPIDGVYGGPVJGCKTQWVNGVDNCFGUDGECWUGVJGKPPGT
HCPOC[DGFCOCIGFCPFEQWNFECWUGKPLWT[-GGREJKNFTGPCYC[HTQO
VJGWPKV
X &QPQVRNCEGCP[QDUVCENGUKPHTQPVQHVJGWPKV
X  &QPQVURTC[NKSWKFQHCP[MKPFKPVQVJGKPFQQTWPKV5JQWNFVJKUJCRRGP
UYKVEJQHHVJGDTGCMGTWUGFHQT[QWTCKTEQPFKVKQPGTCPFEQPVCEV[QWT
KPUVCNNCVKQPURGEKCNKUV
X  /CMGUWTGVJCVVJGWPKVKUEQTTGEVN[XGPVKNCVGFCVCNNVKOGU
&QPQVRNCEGENQVJKPIQTQVJGTOCVGTKCNUQXGTKV
X  +HVJGYKTGNGUUTGOQVGEQPVTQNYKNNPQVDGWUGFHQTCNQPIVKOGTGOQXG
VJGDCVVGTKGU+HCRRNKECDNG
X  9JGPWUKPICYKTGNGUUTGOQVGEQPVTQNVJGFKUVCPEGUJQWNFPQVDG
OQTGVJCPOGVGTUHTQOVJGCKTEQPFKVKQPGT+HCRRNKECDNG
& +5215+0)  1(  6*'  70+6
X  $GHQTGVJTQYKPIQWVVJGFGXKEGKVKUPGEGUUCT[VQRWNNDCEMVJGDCVVGT[
EGNNUCPFIGVTKFQHVJGOUCHGN[HQTTGE[ENKPITGCUQPU
X  9JGP[QWPGGFVQFKURQUGQHVJGWPKVEQPUWNV[QWTFGCNGT+HRKRGUCTG
TGOQXGFKPEQTTGEVN[TGHTKIGTCPVOC[DNQYQWVCPFEQOGKPVQEQPVCEV
YKVJ[QWTUMKPECWUKPIKPLWT[4GNGCUKPITGHTKIGTCPVKPVQVJGCVOQURJGTG
CNUQFCOCIGUVJGGPXKTQPOGPVU
X  2NGCUGTGE[ENGQTFKURQUGQHVJGRCEMCIKPIOCVGTKCNHQTVJKURTQFWEVKP
CPGPXKTQPOGPVCNN[TGURQPUKDNGOCPPGT
16*'45 X
 0GXGTUVQTGQTUJKRVJGCKTEQPFKVKQPGTWRUKFGFQYPQTUKFGYC[UVQ
CXQKFFCOCIGVQVJGEQORTGUUQT
X  6JGCRRNKCPEGKUPQVKPVGPFGFHQTWUGD[[QWPIEJKNFTGPQTKPHKTO
RGTUQPUYKVJQWVUWRGTXKUKQP;QWPIEJKNFTGPUJQWNFDGUWRGTXKUGFVQ
GPUWTGVJCVVJG[FQPQVRNC[YKVJVJGCRRNKCPEG
X  /CZEWTTGPVKUOGCUWTGFCEEQTFKPIVQ+'%UVCPFCTFHQTUCHGV[CPF
EWTTGPVKUOGCUWTGFCEEQTFKPIVQ+51UVCPFCTFHQTGPGTI[GHHKEKGPE[
4GIKUVGT[QWTRTQFWEVCVYYYUCOUWPIEQOINQDCNTGIKUVGT

"
◆PREPARING YOUR AIR CONDITIONER
■ Safety Precautions................................................................. 2
■ View of the Unit ..................................................................... 4
■
■
Remote
Heating Your
Control
Room ............................................................. 11
-
22
Buttons and Display .................................. 6
■ Inserting the Remote Control Batteries ................................. 7
◆OPERATING YOUR AIR CONDITIONER
■ Selecting the Automatic Operating Mode.............................. 9
■ Cooling Your Room ............................................................. 10
■Removing Excess Humidity................................................. 12
■ Airing Your Room.................................................................13
■ Changing the Room Temperature Quickly........................14
■ Adjusting the Air Flow Direction Vertically ...........................15
■ Adjusting the Air Flow Direction Horizontally......................15
◆PROGRAMMING YOUR AIR CONDITIONER
■ Setting the OnTimer ........................................................... 16
■ Setting the Off Timer ........................................................... 17
■ Selecting good'sleep mode ............................................ 18
◆RECOMMENDATIONS FOR USE
■ Operating Recommendations .............................................. 20
■ Temperature and Humidity Ranges..................................... 21
■
Operating Your Air Conditioner Without the Remote Control ........... 21
■ Solving Common Problems .................................................
23
■ Cleaning Your Air Conditioner .............................................
Contents
.
.
■Getting Started ...................................................................... 8
■Installation and maintenance................................................24
......

E-4
View of the Unit
Indoor Unit
The design and shape are subject to change according to the model.
Air Inlet
Air filter
(upper the panel front)
Air flow blades
(outlet)
Operation indicator
(GREEN)
Timer indicator
(GREEN)
Turbo indicator
(RED)
Power(On/Off) button
Temperature sensor

E-5
Outdoor Unit
Air Outlet
Air Inlet (Rear)
Connection Valve

E-6
Remote Control - Buttons and Display
Remote control
transmission indicator Mode selection button
(AUTO, COOL, DRY,
FAN, HEAT)
Turbo button
Swing button
On Timer button
Off Timer button
On/Off &
Timer Set/Cancel button
Fan speed adjustment
button
Temperature adjustment
buttons
Temperature setting
good'sleep mode indicator
Fan speed indicator
Air flow direction indicator
On Timer indicator
Off Timer indicator
Battery discharge indicator
good'sleep button
Operating mode indicator
(AUTO, COOL, DRY,
FAN, HEAT)
Turbo function indicator

+PUGTVKPIVJG4GOQVG%QPVTQN$CVVGTKGU
;QWOWUVKPUGTVQTTGRNCEGVJGTGOQVGEQPVTQNDCVVGTKGUYJGP
X;QWRWTEJCUGVJGCKTEQPFKVKQPGT
X6JGTGOQVGEQPVTQNFQGUPQVYQTMEQTTGEVN[
0QVG
X7UGVYQ###.48DCVVGTKGU
X&QPQVWUGQNFDCVVGTKGUQTFKHHGTGPVMKPFUQHDCVVGTKGUVQIGVJGT
X$CVVGTKGUOC[DGEQORNGVGN[FKUEJCTIGFCHVGTOQPVJUGXGP
KHVJG[JCXGPQVCEVWCNN[DGGPWUGF
2WUJVJGDCVVGT[EQXGTQPVJGTGCTQHVJGTGOQVGEQPVTQNYKVJ[QWT
VJWODKPVJGFKTGEVKQPQHVJGCTTQYCPFTGOQXGKV
+PUGTVVJGVYQDCVVGTKGUVCMKPIECTGVQTGURGEVVJGRQNCTKVKGU
X
QPVJGDCVVGT[YKVJQPVJGTGOQVGEQPVTQN
X
QPVJGDCVVGT[YKVJQPVJGTGOQVGEQPVTQN
%NQUGVJGEQXGTD[UNKFKPIKVDCEMWPVKNKVENKEMUKPVQRNCEG
"

)GVVKPI5VCTVGF
;QWJCXGLWUVRWTEJCUGFCURNKVV[RGCKTEQPFKVKQPGTCPFKVJCUDGGP
KPUVCNNGFD[[QWTKPUVCNNCVKQPURGEKCNKUV
;QWT1YPGTŏU+PUVTWEVKQPUEQPVCKPUXCNWCDNGKPHQTOCVKQPQPWUKPI[QWT
CKTEQPFKVKQPGT2NGCUGVCMGVJGVKOGVQTGCFKVCUKVYKNNJGNR[QWVCMGHWNN
CFXCPVCIGQHVJGWPKVŏUHGCVWTGU
6JGDQQMNGVKUQTICPK\GFCUHQNNQYU
X6JGHQNNQYKPIſIWTGUCTGUJQYPQPRCIGUHTQOVQ
+PFQQTCPFQWVFQQTWPKVU
4GOQVGEQPVTQNDWVVQPUCPFFKURNC[
6JG[YKNNJGNR[QWſPFVJGDWVVQPUCPFWPFGTUVCPFVJGU[ODQNUFKURNC[GF
X+PVJGOCPWCN[QWYKNNſPFCUGTKGUQHUVGRD[UVGRRTQEGFWTGUHQTGCEJ
HWPEVKQPCXCKNCDNG
6JGKNNWUVTCVKQPUKPVJGUVGRD[UVGRRTQEGFWTGUWUGVJTGGFKHHGTGPVU[ODQNU
24'55 275* *1.&&190
"

E-9
You can start the air conditioner in Auto mode from your remote
control. In the Auto mode, the cooling operation is selected
automatically. You can also raise or lower the temperature but not
the fan speed.
1If necessary, press the button.
Result: ◆ The operation indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected
when the unit was last used.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2If the
is not displayed at the top of the remote control,
press the button on the remote control one or more times until it
appears.
Result: ◆
The indoor unit beeps each time you press the button.
◆ The air conditioner runs in the Auto mode.
3To adjust the temperature, press the button one or more times until
the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result: ◆ Each time you press the button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
Note
You can change modes at any time.
Selecting the Automatic Operating Mode

E-10
You must select the Cool mode if you wish to adjust the:
◆ Cooling temperature
◆ Fan speed when cooling
5To control the direction of the air flow, refer to page 15.
Cooling Your Room
1If necessary, press the
button.
Result: ◆The operation indicator on the indoor unit lights up.
◆The air conditioner starts up in the mode selected
when the unit was last used.
◆The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
◆Plugged in
◆Stopped
lt will start up normally after three minutes.
2Ifthe is not displayed at the top of the remote control,
press the button on the remote control one or more times until it
appears.
Result: ◆
The indoor unit beeps each time you press the button.
◆The air conditioner runs in the Cool mode.
Note
You can change modes at any time.
3To adjust the temperature, press the button one or more times until
the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result: ◆Each time you press the button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆ The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature.
◆ If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
4Select the fan speed by pressing the button one or more times
until the required setting is displayed:
Automatic (rotated : ➡➡)
Low
Medium
High
Result: Each time you press the button, the indoor unit beeps.

;QWOWUVUGNGEVVJG*GCVOQFGKH[QWYKUJVQCFLWUVVJG
X*GCVKPIVGORGTCVWTG
X(CPURGGFYJGP*GCVKPI
+HPGEGUUCT[RTGUUVJG DWVVQP
4GUWNV X6JGQRGTCVKQPKPFKECVQTQPVJGKPFQQTWPKVNKIJVUWR
X6JGCKTEQPFKVKQPGTUVCTVUWRKPVJGOQFGUGNGEVGF
YJGPVJGWPKVYCUNCUVWUGF
X6JGKPFQQTWPKVDGGRU
+/2146#06
6JGCKTEQPFKVKQPGTKUſVVGFYKVJCRTQVGEVKQPOGEJCPKUO
VQRTGXGPVVJGWPKVHTQODGKPIFCOCIGFYJGPKVKUUVCTVGF
KOOGFKCVGN[CHVGTDGKPI
X2NWIIGFKP
X5VQRRGF
NVYKNNUVCTVWRPQTOCNN[CHVGTVJTGGOKPWVGU
+HVJG KUPQVFKURNC[GFCVVJGVQRQHVJGTGOQVGEQPVTQN
RTGUUVJG DWVVQPQPVJGTGOQVGEQPVTQNQPGQTOQTGVKOGUWPVKNKV
CRRGCTU
4GUWNV X
6JGKPFQQTWPKVDGGRUGCEJVKOG[QWRTGUUVJG DWVVQP
X6JGCKTEQPFKVKQPGTTWPUKPVJG*GCVOQFG
0QVG
;QWECPEJCPIGOQFGUCVCP[VKOG
6QCFLWUVVJGVGORGTCVWTGRTGUUVJG DWVVQPQPGQTOQTGVKOGUWPVKN
VJGTGSWKTGFVGORGTCVWTGKUFKURNC[GF
2QUUKDNGVGORGTCVWTGUCTGDGVYGGPu%CPFu%KPENWUKXG
4GUWNV X'CEJVKOG[QWRTGUUVJG DWVVQP
6JGVGORGTCVWTGKUCFLWUVGFD[u%
6JGKPFQQTWPKVDGGRU
X+HVJGTQQOVGORGTCVWTGTGCEJGUVJGUGVVGORGTCVWTG
UGNGEVGFVGORGTCVWTGu%VJGCKTEQPFKVKQPGTUVQRUJGCVKPI
DWVVJGHCPKUUVKNNQRGTCVKPI
X6JGCKTEQPFKVKQPGTUVCTVUJGCVKPIRTQXKFGFVJCVVJGTQQO
VGORGTCVWTGKUNQYGTVJCPVJGFGUKTGFVGORGTCVWTG
UGNGEVGFVGORGTCVWTGu%
5GNGEVVJGHCPURGGFD[RTGUUKPIVJG DWVVQPQPGQTOQTGVKOGU
WPVKNVJGTGSWKTGFUGVVKPIKUFKURNC[GF
4GUWNV X'CEJVKOG[QWRTGUUVJG DWVVQPVJGKPFQQTWPKVDGGRU
X(QTVJGſTUVVJTGGVQſXGOKPWVGUVJGHCPQRGTCVGUXGT[
UNQYN[WPVKNVJGCKTJCUDGGPUWHſEKGPVN[YCTOGF1PEGVJG
EQTTGEVVGORGTCVWTGJCUDGGPTGCEJGFVJGHCPKUCWVQOCVKECNN[
UGVVQVJGTGSWKTGFURGGF
6QEQPVTQNVJGFKTGEVKQPQHVJGCKTƀQYTGHGTVQRCIGU5
*GCVKPI;QWT4QQO
E-11
Automatic (rotated : ➡➡)
Low
Medium
High

ENGLISH
Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
1If necessary, press the
button.
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
IMPORTANT
The air conditioner is tted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2If the is not displayed at the top of the remote control,press the
button on the remote control one or more times until it appears.
Result:
The indoor unit beeps each time you press the button.
The air conditioner runs in the Dry mode.
Note
You can change modes at any time.
3To adjust the temperature, press the button one or more times until
the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result: Each time you press the button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
The fan is running in auto mode.
4To control the direction of the air flow, refer to pages 15.
E-12
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆

If the atmosphere in your room is stale, you can air the room using
the Fan feature.
1If necessary, press the
button.
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
2If the is not displayed at the top of the remote control,press the
button on the remote control one or more times until it appears.
Result:
The indoor unit beeps each time you press the button.
The air conditioner runs in the Fan mode.
The temperature is set automatically.
Note
You can change modes at any time.
3Select the fan speed by pressing the button one or more times
until the required setting is displayed:
Low
Medium
High
Result: Each time you press the button, the indoor unit beeps.
4To control the direction of the air flow, refer to pages 15.
Airing Your Room
E-13
◆
◆
◆
◆
◆
◆

Changing the Room Temperature Quickly
ENGLISH
The Turbo cooling/heating function is used to cool or heat your room as
quickly as possible.
Example : You have just come home and find that the room is very
hot. You wish to cool it down as quickly as possible.
The Turbo function operates for 30 minutes with the maximum settings before
returning automatically to the mode and temperature previously selected.
1If necessary, press the
button.
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
2Press the button.
Result:
The temperature and fan settings are adjusted automatically.
The air conditioner cools or heats the room as quickly as possible.
After 30 minutes, the air conditioner is reset automatically to the
previous mode, temperature and fan settings.
You can select the Turbo function in the Auto, Cool and Heat mode.
If you select this function in the Dry or Fan mode, it will return to
the Auto mode.
3If you wish to stop the Turbo function before the end of the 30-minute period,
press the
button one or more times until disappears.
Result: The air conditioner is reset automatically to the previous mode,
temperature and fan settings.
4To control the direction of the air flow, refer to pages 15.
IMPORTANT The air conditioner is fitted with protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
E-14
◆
◆
◆
◆
◆
◆
◆

E-15
Depending on the position of the indoor unit on the wall of your room,
you can adjust the position of the outer air ow blade on the bottom
of the unit, thus increasing the ef ciency of the air conditioner.
1Press the button one or more times as required.
Result: The outer blade is adjusted vertically.
2If you want the blade to move up and down automatically when the air
conditioner is operating, press the
button.
Result: The blade move up and down, around the base position set.
3To stop the blade moving up and down, press the
button again.
Note
If you switch the air conditioner... Then the blade is...
Off Closed completely.
On again
Set to the initial position powered.
Adjusting the Air Flow Direction Horizontally
Adjusting the Air Flow Direction Vertically
1 Adjust each set of inner blades to the required position, by pushing or
pulling them sideways.
There are two sets of inner air flow blades. Just as the outer air flow
blade can be adjusted vertically, the inner blades can be adjusted
horizontally.
When... Adjust the blade to face...
Cooling Upwards
Heating
Downwards.
RECOMMENDATION
E-15

The On Timer enables you to switch on the air conditioner automatically
after a given period of time. You can set the period of time from 0.5 hour
to 24 hours.
1To set the operating time, press the button one or more times until
the required time is displayed. Possible time is between 0.5 hour and
24 hour inclusive.
2Press the button to complete the setting.
Result:
The remaining time is displayed.
Blinking of the timer indicator on the remocon stops.
The selected mode and the temperature on the remocon display
disappear after 10 seconds.
The air conditioner will switch on automatically when the
counter displayed on the remote control reaches the set time
and disappears the On Timer setting.
3To select an operating mode in advance, press the button until the
desired mode is displayed at the top of the remote control.
Result: The air conditioner will run in the selected mode when it is
turned on.
To Cancel the On Timer
If you no longer wish to use the On Timer that you have set, you can
cancel it at any time.
1To cancel the On Timer, press the button one or more times until
the timer setting disappears.
2Press the button.
Note
If you want to turn on the air conditioner before the timer reaches
the setting time, press the button.
Setting the On Timer
E-16
◆
◆
◆
◆

The Off Timer enables you to switch off the air conditioner automatically
after a given period of time. You can set the period of time from 0.5 hour
to 24 hours.
1To set the operating time, press the
button one or more times until
the required time is displayed. Possible time is between 0.5 hour and
24 hour inclusive.
2Press the button to complete the setting.
Result:
The remaining time is displayed.
Blinking of the timer indicator on the remocon stops.
The air conditioner will switch off automatically when the
counter displayed on the remote control reaches the set time
and disappears the Off Timer setting.
Example
If you would like to turn the air conditioner on after 2 hours
and to operate it for 2 hours:
1. Press the button until ‘2 Hr’ is displayed.
2. Press the button.
3. Press the button until ‘4 Hr’ is displayed.
4. Press the button.
Note
You can see or change the setting mode and/or the temperature
by pressing the button or the button after setting the
Off Timer.
To Cancel the Off Timer
If you no longer wish to use the Off Timer that you have set, you can
cancel it at any time.
1To cancel the Off Timer, press the
button one or more times until
the timer setting disappears.
2Press the button.
Note
If you want to turn off the air conditioner before the timer reaches
the setting time, press the button.
Setting the off Timer
E-17
◆
◆
◆

To Cancel the good'sleep
If you no longer wish to use good'sleep that you have set, you can cancle
it at any time.
1press the
button to switch off the air conditioner.
2To cancel a selected good'sleep mode you can also press the
button, the ,the button, or button, the air conditioner
1Press the button one or more times until
is displayed on your
remote control.
Result:
◆ The indoor unit beeps.
◆ If good'sleep is selected after switching on the unit, the air
conditioner will run in Cool mode. During this period, the temperature
displayed is one you set for the Cool mode. If good'sleep is selected
before switch on the unit, the air conditioner starts running in
Cool mode and the temperature is set to 26°C.
◆ The fan is running in auto mode.
will run in cool mode.
be selected only when the air conditioner is "switched on"in cool mode.
button to
set Off Timer in the range from 0.5 hour to 12 hours.then press the
button
to confirm this selection, during the period of good'sleep mode , the possible
temperatures are between 16°C and 30°C inclusive, but the fan speed and
the direction of the air flow is nonadjustable.
Selecting good'sleep mode , as a result, the Off Timer will switch off the
air conditioner after 8 hours automatically, or you can press the
E-18
Selecting good'sleep mode
good'sleep mode helps users to fall asleep well after going to bed whether
being too hot to sleep or being awakened by coldness. The good'sleep mode can

Selecting good'sleep mode
E-19
f
f
f
f
Falling Asleep Stage :
This stage supports enviroment to quickly cool down. Together with
comfortable intermittent air, you will be able to fall asleep quickly.
The recommended temperature is set between 25oC ~ 27oC, and 26oC is
the most ideal temperature for comfortable sleep for cooling and 21oC ~ 23oC
for heating.
Airflow blades and fan speed are controlled automatically as the above 3 stages
in good'sleep mode.
Set Off timer in good'sleep mode over 5 hours. You feel disturbed sleep
if the good'sleep mode is set too short or long because the basic off timer is
set for 8 hours.If the good'sleep mode is set less than 4 hours, the operation
will be stopped.
After setting time, If the good'sleep mode is set over 5 hours, it will run as
Wake Up stage for the last one hours before stop.
Sound Sleep Stage :
This stage helps users to take deep sleep and keep the healthy skin by
controlling wavy temperature control and insensible air stream.
Wake Up Stage :
This stage supports comfortable intermittent air to the room to raise
human body temperature for refreshing wake up.
Set Temperature
When the set time is over 8 hours,
this section will be repeated.
Temp.
Time(hr.)
Heat mode
Temp.
Set temperature
Time(hr.)
Cool mode
To prevent excessive cooling/heating during sleep, the good'sleep mode
automatically modifies the temperature setting in according with the time
setting. Temperature and air current change according to the 3 stages;
Falling Asleep, Sound Sleep, Wake Up from good'sleep mode, and then
the air conditioner will automatically turn off when the set time has elapsed.
When the set time is over
8 hours, this section will be
repeated.

DB98-26492A(1)-E-1.indd 20
Operating Recommendations
E-20
When you useyour air conditioner, it is recommended that you read thefollowing:
Topic Recommendation
Common Air conditioner should be used only in the single closed room.
Effective air conditioner operation can be guarantee if all windows
and doorsin the room are closed.
War m ai r ci r cu l at i o n
Fr o st
High indoor and
outdoor temperatures
Po w e r f ai l u r e
Pr o t e ct i o n m ech an i sm
Heat i ng cap acit y
The heat pump inside the air conditioner absorbs heat from outside air
and brings it indoors. If the temperature of the outside air drops, the
air conditioner heats less. If the room is not warm enough, use an
additional heating appliance.
The air conditioner circulates warm air to heat your room. It will take some
to warm the air inyour room entirely after the air conditioner turns on.
Therefore, turn the air conditioner on in advance.
When you select the Heat mode, frost may from in the outdoor unit due
to low temperature and high humidity.
If this happens:
The heating operation is stopped.
The air conditioner defrost automatically for about 7 minutes.
After about 7 minutes, the air conditioner starts operating again normally.
If the both the indoor and outdoor temperatures are high when you select
the Heat mode, the fan and the compressor of the outdoor unit may stop
periodically. This is normal; wait until the air conditioner turns on again.
If a power failure occurs when the air conditioner is operating, the air
conditioner will turn off. When the power returns, the air conditioner will
start up again automatically.
When the air conditioner is started immidiately after being plugged in or
stopped, the normal operation starts up after 3 minutes for reason of protection.
f
f