Samsung YP-Z5AS - 4 GB Quick start guide

YP-Z5 Firmware Upgrade Instruction for
Windows Media Player 10 & 11

Z5F F/W Upgrade Instruction
NOTE: Before starting this process CHECK YOUR BATTERY STATUS.
This document describes temporary F/W upgrade method
Requirement
Requirement Requirement
Requirement
- Windows XP (SP1, SP2)
- Z5F F/W Version 2.28 (or above). The filename is Z5Update.dat
F/W Upgrade Procedure
F/W Upgrade Procedure F/W Upgrade Procedure
F/W Upgrade Procedure
1) Connect USB cable. The device will be connected as ‘Samsung YP-Z5’ see
bellow. When using Windows Media Player 11 first Explore the device, and
then select Format.

2) When formatting you will see the following windows. The top series with
Windows Media player 11 bottom series with Windows Media player 10.
3) After formatting Explore the device as shown below.
4) Copy the new F/W (2.28 or above) to the device. The filename is Z5Update.dat
• With WMP10 copy to the DATA Folder
• With WMP11 copy to ROOT Folder “Samsung YP-Z5 Storage”

5) Disconnect the USB cable. The following screen will come
up. Select Upgrade to initiate firmware upgrade. This will
power off the system.
6) Turn ON the unit. The system will automatically upgrade the
firmware. After finishing the upgrade, the new firmware will
be started automatically.
7) Check the version information in the Settings > System Info
> Version tab.