Samsung YP-NDU User manual

Digital Audio Player
http://www.samsungyepp.com
MP3 music file playback
3D sound effect
8-mode equalizer
Voice recording
32/64MB built-flash memory
Memory expansion slot
Remote Controller with backlight LCD
Data transfer with USB
FM Tuner
User's Guide
YP-NDU
Samsung Electronics America inc.
105 Challenger Road, Ridgefield Park, N.J. 07660
SERVICE DIVISION
TEL: 1-800-SAMSUNG (1-800-726-7864)
ndu COVER-SEA 11/17/00 8:57 AM Page 2

CREATING AND DELETING MP3 FILES
-Making MP3 files from an audio CD.............................................................45
-Deleting files..................................................................................................47
-File Replace..................................................................................................49
OTHERS
-SmartMedia Card..........................................................................................50
-Safety Precautions........................................................................................51
-Troubleshooting.............................................................................................52
-Security.........................................................................................................53
-Technical Specifications.................................................................................54
-Safety Information.........................................................................................55
-Warranty........................................................................................................57
CONTENTS
LISTENING TO THE SAMPLE MUSIC
SOFTWARE INSTALLATION AND OPERATION
PREPARING FOR USE
-Checking Parts................................................................................................4
-Parts Description.............................................................................................5
-Remote Controller...........................................................................................7
-Listening to music through yepp' TM.................................................................9
-Searching the MP3 files at a faster speed....................................................11
-Repeating Tracks/Section.............................................................................13
-Setting the Modes.........................................................................................14
-Using the Equalizer.......................................................................................15
-Using the 3D Sound......................................................................................16
-Voice Recording............................................................................................17
-Hold Function................................................................................................20
-Listening to FM Radio...................................................................................21
-Connecting yepp' TM to PC or Mac ..............................................................23
-Installing Software on PC..............................................................................25
-Installing Software on PC (Windows 2000)...................................................29
-Installing Software on Mac............................................................................31
-Formatting flash memory...............................................................................33
-Options..........................................................................................................36
-Sending files to yepp' TM ...............................................................................39
nduwemf(SEA) 11/22/00 2:37 PM Page 2

Digital Sound -
3 4
Checking Parts
Features
-
CD-quality sound.
MP3 refers to MPEG1 LAYER3. MP3 is a music file made of audio data compression
technology with no degradation of the original sound.
" " is an advanced digital audio player which doesn't need a cassette
tape or CD. You can download MP3 files from the Internet or PC
Communications and enjoy great sound any time, any place.
What is MP3?
What is ? USB cable
Remote
controller
Earphone Installation
software CD AAA alkaline batteries(1.5V) User's Guide
◆SmartMedia Card is not included.
Belt clip
Carrying
Case
nduwemf(SEA) 11/22/00 2:37 PM Page 4

Digital Sound -
65
Front Panel Rear Panel
Power On
/Play
/Pause button
Volume control button
Forward button
Connection cable terminal
Parts Description
Stop/Power Off button
Equalizer button
Reverse button
Microphone
SmartMedia
Card Slot.
Belt Clip
holder
SMC open
button
3D button
LCD
Voice Recording button
Repeat button
Mode/Section repeat
button
Erase button
Battery Installation
1Remove the battery
door by pushing on
the thumb recess in
the direction of the
arrow.
2Insert the batteries; paying
attention to the orientation
of the + and - ends of the
batteries. Replace the
battery door.
Main System
Main System
Main Remote controller/
Earphone jack
SMC Eject
Battery door
Hold switch
➡
➡
nduwemf(SEA) 11/22/00 2:37 PM Page 6

Digital Sound -
87
Remote Controller
Display Panel
Front Panel Rear Panel
Remote Controller Connection
1Insert the remote control plug
into the main controller jack on the
left side of the yepp player.
2Insert the earphone plug into
the earphone jack on the remote.
Remote Controller
Remote Controller
Remote controller
Main System
REW
button
LCD panel
Power On/Play
/Pause button
Mode button
EQ/REP button
FF button
Earphone Jack
Volume control
button
Section repeat
button (A↔B)
Hold switch
Belt Clip
Stop/Power Off
button
nduwemf(SEA) 11/22/00 2:37 PM Page 8

Digital Sound -
109
Listening to music through
TM
Insert batteries into the battery compartment, and then connect the remote controller and earphones correctly.
Turn on the Power
1
Playback
1Press the button on the yepp player
or the remote controller.
Control Volume
1Control volume with the volume
control button ( / ) on your
yepp player or remote controller.
Stop Music
1Press the Stop button ( )
of your yepp player or remote
controller to stop playing back
sound.
Power On/Play
/Pause button
Stop button
N
No ot te eTo pause playback, press the button. The mark
blinks on the remote controller display panel.
Press the button again to resume playback. N
No ot te eVolume can be controlled from 00 to 20.
Press to move up or down by 1 step.
Press and hold to move continuously.
N
No ot te eIf the unit is in the Stop mode for more than 3 minutes,
it will power off automatically.
Basic Functions
Basic Functions
Press the button on the yepp
player or remote controller.
➡
in one second.
➡
in one second.
Volume control
button
nduwemf(SEA) 11/22/00 2:37 PM Page 10

Digital Sound -
1211
Press the and buttons to move to the next track.
1To search within a song being played back:
●Press and hold the FF button( )while a song is being played back
to fast forward. Release the button to resume playback.
➡
➡
➡
➡
➡
➡
N
No ot te ePress and hold the REW button while a song is being played back to
move quickly backward.
2To skip to the next song while another
song is being played back:
●Press the FF button ( ) to move
one track forward.
3To search a song in stop mode:
●Press the FF button ( ) to move one
track forward. To play back the song that you
chose, press the Play button ( ).
●Press the REW button( )to move one track
backward.
N
No ot te eIf the REW button is pressed before the first 5 seconds of the track has played, the previous song will be repeated.
If the REW button is pressed after 5 seconds has played, the current song will be repeated.
Basic Functions
Basic Functions
Searching the MP3 files at a faster speed
FF button
REW button
nduwemf(SEA) 11/22/00 2:37 PM Page 12

14
Setting the Modes Repeating Tracks/Section
Digital Sound - Digital Sound -
13
Section
repeat button
1Press the A↔B button( )of your
remote control at the start point of
the track or section that you want to
repeat.
Then, 'B' blinks on the display panel.
1Each time the EQ/REP button ( ) of your remote controller is
pressed and held, the modes will change in the order of REP REP, ,
ALL, SHU
ALL, SHU and INT INT.
◆REP mode: Repeats current track.
◆ALL mode: Repeats all the tracks.
◆SHU mode: Enables random playback.
◆INT mode : Enables you to repeat the first 10 seconds of the tracks saved.
2Press the button again at the
end point of the track or section
that you want to repeat.
N
No ot te eThe section from point A to point B that you selected will automatically be repeated.
To cancel this function, press the A↔B button again.
While tracks/sections are repeated, the and buttons do not work.
Section Repeat
Section Repeat Mode Setting
Mode Setting
➡➡
EQ/REP
button
Press the A ↔ B button of your remote controller to repeat the track or section
that you selected. Setting 'Repeat Track' needs a minimum of two seconds of play time.
nduwemf(SEA) 11/22/00 2:37 PM Page 14

Using the Equalizer
Digital Sound -
15 16
Using the 3D Sound
Digital Sound -
1Press the 3D button( ) to add the Surround 3D sound effect to
four different modes (NORMAL NORMAL, CLASSIC CLASSIC, JAZZ JAZZ, ROCK ROCK).
The surround 3D sound is available only in the MP3 mode.
Equalizer Function
Equalizer Function
1Each time the EQ/REP button ( ) of your remote controller is
pressed, the equalizer modes will be changed in the order of
Classic
Classic, Jazz, Rock Jazz, Rock and Normal. Normal.
Normal mode is not indicated on the panel.
➡
◆ Press the 3D button( ) again to cancel the 3D mode.
Equalizer
button
3D button
nduwemf(SEA) 11/22/00 2:37 PM Page 16

18
Digital Sound -
Voice Recording
17
Recording voice messages
1Press the Mode button( ) on
the main unit to switch to
the voice mode. 1Use the FF( ) and REW buttons
( ) to select the message (V001,
V002...) you prefer. 2Press the button to playback
the selected message.
You can pause the track by pressing
the button once again.
2Press the REC button( ), and
the voice message will be recorded
through the microphone.
● Press the Stop button( ) to stop recording.
If you repeat this operation, the voice
messages will be recorded in the
sequence of V001, V002....V00N.
●Voice Mode can only be activated
in the stop mode.
N
No ot te e
●This feature allows you to easily record
lectures, interviews and conference
messages, etc.
●The player will automatically stop recording
when the memory becomes full.
●The voice messages are recorded on the
built-in memory. If the memory capacity is
low, they will be recorded on the Smart Media
Card (in the sequence of V001,V002...V00N).
●Be careful not to press the Erase button
because the erasing function may run.
●Voice recording is made only on the main
system.
N
No ot te e
●When you press the button
without selecting V001, V002...V00n,
you will hear the recorded message that
coincides with the number currently shown
on the LCD panel.
●Press the FF( )or REW button ( )
during playback to move forward or in
reverse at a faster speed.
Playing recorded voice messages
●Press the button again to resume
playback.
Mode button
REC
button
Stop
button
nduwemf(SEA) 11/22/00 2:37 PM Page 18

20
Hold Function
Voice Recording
Digital Sound - Digital Sound -
19 Stop button
Hold switch 1While the Hold switch ( ) on your
yepp player is on;
●Buttons on the yepp won't work.
Each time a button is pressed, "Hold"
will appear for a short time on the display.
Only the buttons
on your remote
controller will work.
Turning off the power.
●Press and hold Stop( ) for
1 second while all functions
have been stopped.
Then, "OFF" will appear on
your panel, and then be
cleared.
2While the Hold switch ( ) on your
remote controller is on;
●The mark will appear on the display
panel. None of the buttons on your remote
control will work.
The buttons on your
yepp will work.
Erasing recorded voice messages
1Use the FF( ) and REW buttons
( )to select the message (V001,
V002...) you want to erase. 2Press the Erase button ( ) for
at least 1 second and the
message "Erase?" will appear on
the LCD panel. Then press the
button to erase the selected
message.
N
No ot te e
●T o cancel the erasing function, press
the button.
●After the selected message is erased,
player will show the next message
number.
nduwemf(SEA) 11/22/00 2:37 PM Page 20

21 22
Digital Sound -
Listening to FM Radio
FM Radio
FM Radio
Mode button
Rewind button Forward button
To Search the FM Frequency Band
1Press the Mode button to switch to FM mode.
2Press and hold either REW or FF. The unit will automatically
search from station to station(Auto Search).
3To search manually in one step increments, press and release
either REW or FF.
N
No ot te e●In the FM mode, the LCD panel backlight is not turned on.
●In the FM mode, the screen display does not appear in the main system.
●Once the power is turned off, initialization will be made in the mp3 mode.
To set to FM mode, press the Mode button again. Stop
button
EQ/REP
button A↔B button
To Save a Radio Station
1At the radio station frequency that you want to save, press the
EQ/REP button.
2A saving location letter (a, b, c, d, e) blinks in front of the radio
station that the screen display shows. Press the A•B button to
choose one saving location. Then, press the EQ/REP button once
more to save.
N
No ot te e●Max. five stations (a, b, c, d, e) can be saved.
●You can replace one station with another at each saving location. But it is not possible to
delete a saved station.
●Press the Stop button for a moment to turn off the system.
W
Wa ar rn ni in ng g●When in the FM mode, do not attempt Format, Delete or Download.
●The saving location letters (a, b, c, d, e) blink each time the
A↔B button is pressed.
●Once a radio station is saved, you can move directly to the saved location
by clicking on the the A↔B button.
nduwemf(SEA) 11/22/00 2:37 PM Page 22

24
Connecting
TM
to PC or Mac
Digital Sound -
23
1Connect the USB cable to
the USB port of the computer.
2Turn the player on and connect the other end
of the cable to the download connector.
Minimum PC System
Requirements
● Pentium 133 MHz
● Windows 98/2000
● Mac OS 7.0
● 20 MB Free Disk Space
● CD-ROM Drive
(Optimum:8 X and more)
● Built-in USB Port
N
No ot te e
●Be sure to install the yepp´ TM Explorer before connecting your yepp´ TM to your PC or Mac.
When the message “Add new hardware wizard” appears on the screen, click [Cancel]
and then install the yepp´ TM Explorer.
●If the USB driver is not installed automatically, refer to page 29(PC only).
nduwemf(SEA) 11/22/00 2:37 PM Page 24

25 26
Digital Sound -
Installing Software on PC
This software lets
you listen to
MP3 music on your
computer
digitally and enables
you to encode your
CDs into MP3 Files.
1Click.
Click
2Click the next button on each successive window.
Install the other program
or download files
depending on your
requirements.
Click Click
Click
Insert the Installation CD into
the CD-ROM drive. The
picture to the right appears
when inserting the CD.
Yepp Explorer
nduwemf(SEA) 11/22/00 2:37 PM Page 26

Digital Sound -
2827
Installing Software on PC
Insert the Installation CD into
the CD-ROM drive. The
picture to the right appears
when inserting the CD.
1Click.
Click
2Click the next button on each successive window.
Install the other
program or download
files depending on
your requirements.
Click Click
Click Click
Click
Click
Click
Realjukebox
N
No ot te e●If the Real Network home page is not connected automatically
when the Realjukebox program has been installed, try to access
http://www.real.com.
nduwemf(SEA) 11/22/00 2:37 PM Page 28

29 30
Digital Sound -
If a USB port error occurs
after installing the yepp
explorer in Windows 2000,
do the following steps 1~3.
1Copy the secypusb. sys file from the
installation CD. 2Paste the secypusb. sys into 'Drivers' from the system32 folder in Windows 2000(System Root
Directory)(ex: / WinNT/ system/Drivers) 3Re-boot the computer.
W
WA AR RN NI IN NG G
● Even though the secypub. sys file is present in the existing folder, be sure to run Change File.
Installing Software on PC (Windows 2000)
nduwemf(SEA) 11/22/00 2:37 PM Page 30

31 32
Digital Sound -
Insert the Installation CD into
the CD-ROM drive. The picture
to the right appears when
inserting the CD.
2Click the button on each successive window.
Click
Click
After all installations are
complete, the yepp
explorer folder is created.
Execute the yepp´ TM
Explorer.
Double
Click
Double
Click
1Execute the yepp´ TM
Explorer.
● Double-click the yepp´ TM
Explorer icon.
▼yepp´ TM Explorer Folder
Installing Software on Mac
nduwemf(SEA) 11/22/00 2:37 PM Page 32

34
Formatting flash memory(PC)
Digital Sound -
33
1Execute the yepp´ TM Explorer. 2Click [File], [Format] and select
[Flash Memory].
N
No ot te e●Before formatting the flash memory or the SmartMedia Card, connect your yepp´TM to PC and click Refresh icon on the yepp´ TM Explorer.
●If the optional SmartMedia Card is installed in the yepp´ TM, file(s) can also be saved to the card by clicking Copy to
Copy to and selecting
SmartMedia Card
SmartMedia Card.
●You can also format the flash memory or the SmartMedia Card by pressing the right button on the mouse and selecting Format.
W
WA AR RN NI IN NG G
●Formatting Flash memory(or Smart Media Card) will delete all existing files.
● Double-click t he yepp´ TM Explorer icon on the desktop.
Yepp Explorer Realjukebox
1Connect your yepp'TM to PC and
execute the RealJukebox. 3Click Configure icon and Select Format_ Flash_Card/Format_Internal_Memory.
2Click/Double-Click through the following
items. Devices -->Samsung Ne....
Click
W
WA AR RN NI IN NG G
● Formatting Flash memory(or Smart Media Card) will
delete all existing files.
N
No ot te e●
Before formatting the flash(SmartMedia) Card or the Internal
(flash) memory, press F5 Key to refresh.
(Or click View↔Refresh in the Main menu)
nduwemf(SEA) 11/22/00 2:37 PM Page 34

Digital Sound -
35 36
Options
Digital Sound -
Formatting flash memory(Mac)
N
No ot te e●Before formatting the flash memory or the SmartMedia Card, connect your yepp´TM to PC and click Refresh icon on the yepp´ TM Explorer.
●If the optional SmartMedia Card is installed in the yepp´ TM, file(s) can also be saved to the card by clicking Copy to
Copy to and selecting
SmartMedia Card
SmartMedia Card.
W
WA AR RN NI IN NG G
●Formatting Flash memory(or Smart Media Card) will delete all existing files.
1Execute the yepp´ TM Explorer. 2Click [File], [Format] and select
[Flash Memory].
● Double-click the yepp´ TM Explorer icon in the HDD.
W
WA AR RN NI IN NG G
Install the USB driver in the following sequence:
"Select USB (setting option)"-> "Turn on the yepp"->
"Connect a cable to the PC"-
Then the message 'looking for a new device' appears and
simultaneously the USB driver is installed.
If the USB driver is not installed, even though you follow the above
instructions, contact your PC manufacturer or service center.
●Auto
The device has been initially set "Auto".
●USB
When the communication is not smooth in Auto, Select
USB.
Select when uploading the SC4 file on the form of the WAV file.
On PC(yepp Explorer)
Uploading Voice ( Click [File], [Copy to] and select [PC].)
When a voice file is transmitted to another person by E-mail,
receiver should install the mi-sc4.acm file atc://windows//system
to execute the file. The mi-sc4.acm file can be downloaded
from www.samsungyepp.com.
N
No ot te e●
If yepp Explorer is installed in your PC, mi-sc4.acm will
automatically be installed in c://windows//system.
nduwemf(SEA) 11/22/00 2:37 PM Page 36

37 38
Digital Sound -
Options
On PC(Realjukebox) On Mac
Check the Explorer is accessed.
Access is allowed only when Explorer is selected.
If Explorer is not selected, select Explorer and
click on the OK button.
Click
Installation of the USB Driver
1After installing RealJukebox,
connect the yepp to the PC.
2Execute RealJukebox.
3Click on Devices icon on
RealJukebox screen.
4Select Install Device.
5Follow the on-screen
instructions for
RealJukebox.
nduwemf(SEA) 11/22/00 2:37 PM Page 38