Sanctuary SA-PS1D User manual

IMPORTANT:
Please read this information and follow all safety rules carefully before
operating your safe. Failure to do so will void your warranty.
092321
HOME & OFFICE FIRE SAFES INSTRUCTION MANUAL
HOME & OFFICE FIRE SAFE

THIS MANUAL SERVICES THE FOLLOWING STYLE NUMBERS
TABLE OF CONTENTS
SA-PS1D
www.saproducts.com 1
IMPORTANT INFORMATION ............................................................................................... 2
1. REGISTRATION ................................................................................................................ 3
2. UNDERSTANDING YOUR SAFE ...................................................................................... 4
3. UNBOXING ...................................................................................................................... 4
4. INSPECTION .................................................................................................................... 4
5. OPENING YOUR SAFE ................................................................................................... 5
6. E-LOCK BATTERY INSTALLATION ..................................................................................... 6
7. E-LOCK SECURITY CODE SET UP ....................................................................................... 6
8. UNLOCKING YOUR SAFE .................................................................................................. 7
9 LOW BATTERY WARNING ................................................................................................8
10. E-LOCK QUIET MODE ..................................................................................................... 8
11. LOCKED OUT OF YOUR SAFE ....................................................................................... 8
12. PROPER PLACEMENT AND MOVING OF SAFE .............................................................. 9
13. SECURING YOUR SAFE ................................................................................................ 10
14. LOADING YOUR SAFE ............................................................................................... 11
15. KEEPING YOUR SAFE DRY ......................................................................................... 11
16. MAINTAINING HINGES AND INTERNAL MECHANISMS .............................................. 11

2
DISCLAIMER - READ BEFORE SAFE SETUP
WEAPON STORAGE
SAFETY
Thank you for choosing a Sanctuary safe to protect your valuables. We are commit-
ted to securing, organizing and protecng your most important documents,
valuables and keepsakes.
If you experience problems or challenges with your safe, please contact us.
Many issues can be quickly resolved without the product being returned.
Be sure to keep backup keys stored in a safe place away from unauthorized users
If you choose to ulize this safe to store a firearm always follow proper firearm and
local laws when storing a firearm.
SA Consumer Products strongly recommends that you do not store loaded firearms.
Always follow the firearm safety rules set out by the firearm’s manufacturer.
A Sanctuary safe or any other firearm storage device cannot take the place
of other safety procedures including advising children of the dangers of firearms.
SA Consumer Products and its distributors of the Sanctuary safes do not
recommend, suggest, advise, promote, or otherwise condone the ownership
or use of firearms. We believe the decision to own or use a firearm is a serious
decision that should only be made by an adult who has carefully considered
the risks and benefits of such a decision.
PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR
SANCTUARY SAFE.
DO NOT LOCK THIS MANUAL OR THE BACKUP KEYS IN YOUR SAFE.
Contact Customer Service at [email protected] or [phone]

3
www.saproducts.com
REGISTRATION INFORMATION
PURCHASE DATE:
PURCHASE PRICE (BEFORE TAX):
MODEL NUMBER:
SERIAL NUMBER:
KEY NUMBER (IF APPLICABLE):
1. REGISTRATION
RETAILER NAME:
Please ensure you register your safe by vising our website. Locate the
“contact” buon on the top header on the home page. Select registraon
from the drop down menu.
By registering your Sanctuary safe we will be able to expedite and address
any problems or challenges you may have which would otherwise require a
notary leer and proof of payment.
The informaon you record onto this page will be required in the event you
cannot access the contents of your Sanctuary safe. Please fill out all the required
informaon below and retain for your records and safe keeping.
PLEASE HAVE THIS INFORMATION READY PRIOR TO CALLING FOR TECHNICAL
ASSISTANCE AT:
Contact Customer Service at [email protected] or [phone]

SA-PS1D
Knob
Locking
Bolts
Reset
Button
2. UNDERSTANDING YOUR SAFE
Override Entry
(Underneath
Key Cover)
Electronic
Keypad
4. INSPECTION
3. UNBOXING
Make sure to inspect your safe for shipping damage before accepng delivery.
If you find any damage, please contact the delivery company (or carrier) immediately.
Any damage not noted upon delivery must be reported within fieen (15) days
or there will be no recourse. Any noted damage at the me of delivery must be
resolved with the delivery company and/or retailer. Shipping damage is not
warrantable by SA Consumer Products.
WARNING: SAFES ARE HEAVY AND CAN BE UNSTABLE ON UNEVEN SURFACES.
PLEASE ENSURE EXTRA CAUTION WHEN DEALING WITH OR MOVING UNSECURED
SAFES.
Remove the packaging. Carefully remove the box, ensuring not to damage the
safe and/or injure yourself.
4
Top Shelf Battery
Compartment
Mounting
Holes

1.
3.
Step 1
Step 2
Step 3
2.
LOCK UNDER
KEY COVER
Turn the key clockwise from
12 to 3 o’clock to unlock
your safe.
Locate the override key
aached to the product
packaging. Remove the
backup key cover carefully
by placing a flat end screw
driver into the slot and pry
it upwards.
5. OPENING YOUR SAFE
5
Turn the knob on the door
clockwise to grant access to
your safe.
Warning: Do not store
your back-up keys inside
of the safe.

6. E-LOCK BATTERY INSTALLATION
Step 1
1.
WARNING: The baeries must be inserted with the correct polarity. Exhausted
baeries must be removed from the product and discarded safely. Do not mix old
and new baeries. Do not mix alkaline or standard (carbon – zinc)baeries.
Do not use rechargeable (nickel –
cadmium)baeries.
Important: It is necessary to re-program your safe with a new security code you
have personally selected to provide maximum household security. Be careful,
in choosing your new security code, you’ll want to be sure that you can operate
the unit quickly without making an error.
7. E-LOCK SECURITY CODE SETUP
Step 1
1.
2.
6
Locate the baery compartment
on the top of the door panel.
Insert the baeries in the proper
orientaon and order. Keypad
will beep when baeries are
successfully installed. Replace
baery cover.
Input your new 3-8 digit code in
3 seconds, each input will result
in 1 beep and 1 green light flash.
Reset
Buon
Step 1
Locate and remove the red cap
covering the reset buon on
the inside of the door panel.
Push the buon to begin the
process of seng your own
unique entry code. There will
be one beep and one green
light flash.
Step 2
1X green light
and 1X beep
++
+ +
-
-
--

8. UNLOCKING YOUR SAFE
3.
1.
2.
3.
7. E-LOCK SECURITY CODE SETUP (continued)
7
Press “LOCK” to confirm. There will be
2 beeps with a flashing green light. It
means the new code was successful.
4. If the red light flashes twice and
beeps, the code failed. Press the
reset buon again and repeat the
code programming sequence.
Press your new code (3-8 digits),
each input results in a green light
flash and one beep.
Step 1
Step 1
Step 1
Step 1
1X green light
and 1X beep
2X green lights
and 2X beeps
3X red lights
and 3X beeps
Unsuccessful,
Try Again:
Successful:
Step 1
Step 2
Step 1
Step 3
2X red lights
and 2X beeps
Unsuccessful,
Try Again:
Step 1 Step 4
If the red light flashes 3 mes with
3 beeps, the operaon has failed.
Please enter your code again.
Step 1
Step 3
2X green lights
and 2X beeps
Successful:
Press “LOCK” to confirm, there will
be 2 beeps and the green light flashes
twice. This means the operaon is
correct. Turn the knob clockwise
to open the door.

Customer Service - [phone]
11. LOCKED OUT OF YOUR SAFE
In the event you have forgoen the security code your primary acon will be to use
your backup keys in order to gain access to your safe and follow the E-Lock Security
Setup Code instrucons, starng at step 2 of acvang the reset buon.
Note: Factory pass code is “1-5-9-LOCK”
If you have lost your backup keys, you will need to contact customer service at the
number below. Proof of purchase is required to replacement keys.
8. UNLOCKING YOUR SAFE (Continued)
9. LOW BATTERY WARNING
10. E-LOCK QUIET MODE
8
Note: If 3 invalid code aempts are made in succession, this will cause 5 beeps while
the red light flashes 5 mes. The user will be locked out for 60 seconds. You can sll
use your backup key at anyme to open the safe.
If invalid code is entered again, you will hear 5 beeps while the red light flashes 5
mes and the user will be locked out for 5 minutes.
Note: 1. In the factory sengs, the sound has been turned on.
2. During the self-locking, no operaon is available.
By acvang the E-lock quiet mode, the safe will
no longer make audible sounds when interacng
with safe, allowing for silent access.
You can mute/unmute the keypad by entering
the “CLEAR” buon with 1 green light flash.
This E-Lock is equipped to alert you when the baeries are
low by illuminang the yellow light (center) on the keypad
Always test the baeries when installing or replacing. If the
yellow light comes on when a buon is pressed you know
the baeries are not fully charged.
LOW BATTERY
WARNING

WARNING: SAFES ARE VERY HEAVY AND AWKWARD TO HANDLE. PLEASE USE
THE UTMOST CARE IN MOVING THE SAFE. UTILIZING A TRAINED PROFESSIONAL
WITH PROPER MOVING EQUIPMENT IS HIGHLY RECOMMENDED.
1. To maximize burglary protecon and stability, securing the safe to the floor
is recommended.
2.
HELPFUL: TO DETERMINE WHETHER YOUR SAFE WILL MAKE IT THROUGH
DOORWAYS, STAIRS OR CORNERS TAKE THE EMPTY SAFE BOX AND SEE IF IT
WILL FIT ALL THE WAY THROUGH TO ITS FINAL LOCATION.
1. The safe should be installed adjacent to a side wall with minimal space on
either side of the safe. Wherever possible, the safe should be flat against the
wall and floor. Remove the baseboard and/or wall trim if necessary.
2. Always ensure the safe is in an isolated and dry area. Never place the safe in
direct contact with a wet floor. When installing your safe on a concrete floor,
use of a moisture/protecve barrier is highly recommended. Failure to do so,
or exposing the safe to chemicals or other adverse environments, may void
the warranty.
3. If your safe seems unlevel, you may need to shim the boom of the safe to
prevent the door from swinging open too quickly, or closing on itself.
SA Consumer Products recommends that you store your safe in a closet, office,
basement, bedroom or any other locaon that is convenient for you but out of
direct line of sight from prying eyes.
12. PROPER PLACEMENT AND MOVING OF SAFE
9

WARNING: YOUR SAFE IS DESIGNED TO SUPPORT ITSELF WHEN THE DOOR IS
OPENED. HOWEVER, CAUTION SHOULD BE USED TO AVOID TIPPING. WHILE SECURING
YOUR SAFE BE SURE TO HAVE A SECOND PERSON HOLD AND STABILIZE THE SAFE
TO KEEP IT FROM TIPPING, CAUSING INJURY, AND/OR DAMAGE TO THE SAFE AND
SURROUNDING STRUCTURES. FAILURE TO DO SO WILL COMPROMISE THE SAFETY,
SECURITY AND WARRANTY OF THE SAFE.
13. SECURING YOUR SAFE
TOOLS NEEDED TO BOLT SAFE TO A CONCRETE SURFACE
DRILL / HAMMER DRILL
DRILL BIT – 3/16 ” ( for installing into concrete with provided hardware)
WRENCH- 7/16 ” (10MM) SOCKET
HAMMER
10
Use the hardware provided or consult your hardware retailer for fastening
hardware for your parcular mounng surface.
Open your safe door to provide access to the factory drilled bolt down holes.
To secure your safe to the floor it will first be necessary to drill pilot holes in
the floor surface.
Drill the appropriate diameter and depth of pilot holes based on the type of
hardware being used and the type of floor surface. For the hardware provided
(concrete floor installaon) we recommend using a hammer drill and 3/16”
concrete drill bit to drill the four corresponding holes in the concrete floor.
Secure the safe by threading the 4 provided anchor bolts through the factory
drilled mounng holes (2 on the back and 2 on the floor). Secure and ratchet
down ght.
1.
2.
3.
4.
5.

1. Store documents or heat sensive items in the boom of the safe for greatest
protecon against fire damage.
2. Store ammunion separately from valuables.
3. Do not put anything in your safe that will put pressure against the door when
it is closed.
4.
We recommend placing a moisture/protecve barrier between your safe
and concrete floor to prevent any moisture, mildew and rust damage to the safe.
Installing your safe in a place with climate control (heat in the winter and cooling
in the summer) is highly recommended. In areas of high humidity or frequent
temperature fluctuaons (garages) it is recommend to take appropriate
precauons to ward against moisture damage. We strongly encourage the use
of an internal dehumidifier and/or desiccants to protect your contents from
rust or mildew. Internal dehumidifiers should not be in direct contact with
the side or back walls.
The hinges and internal locking mechanism are permanently lubricated, thus
needing no maintenance. Opening the door panel of your safe may void your
warranty. Always consult our customer service experts prior to doing so.
14. LOADING YOUR SAFE
15. KEEPING YOUR SAFE DRY
16. MAINTAINING HINGES AND INTERNAL MECHANISMS
When loading guns into your safe please take extra cauon.
11

SA Consumer Products, Inc. will repair or replace, at their sole
discretion, any Sports Afield Safe damaged by fire, forced entry,
forced attack for the lifetime of the original owner.
SA Consumer Products, Inc. will repair or replace, at their sole
discretion, any Sports Afield Safe with defective parts, paint
or lock for three years of the the original owner purchase date.
If SA Consumer Products, Inc. deems a replacement safe is to be
sent, they will pay the freight costs to ship the replacement safe
to the original owner.
This three year warranty is limited to the safe and expressly
excludes any loss associated with the contents of the safe.
SA Consumer Products, Inc. reserves the right to receive full
evidence of your misfortune, such as a police report and/or
homeowners statement of coverage. This warranty is not valid
outside of the United States and Canada.
Proof of registration and copy of sales receipt must be on file
at the time of claim. Visit our website at www.saproducts.com
to register your safe.
Lifetime warranty only applies to the original owner of the safe.
SA Consumer Products, Inc. shall only be responsible and liable
when the safe is used in compliance with the directions specified
in your new Sports Afield Safe Owner’s Manual.
SA Consumer Products, Inc. requires that specific guidelines be
followed for repair. The safe will be repaired in-home if possible
(to include parts and labor); however, if factory replacement is
necessary (at SA Consumer Products, Inc.’s sole discretion), the
replacement will be shipped freight prepaid, curbside delivery.
This warranty is inclusive and is in lieu of any and all other
warranties, express or implied. Specifically excluded are the
warranties of merchantability and fitness for a particular purpose.
This warranty is limited to the safe itself and/or its value and
does not include consequential damages of any kind including,
but not limited to, the contents in and of the safe.