Santec E-Series User manual

E-SERIES SERIES
SQUARE COLLECTIONS
TOWEL RING
MODEL: 2464SQ10
2464SQ75
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE
Important : Please register your product online at www.santecfaucet.com within
30 days of purchase. Santec reserves the right to request additional documents
before servicing warranty requests.
01 02
Installation Instructions
Place the trim parts against the assigned wall location. Make sure that the ring is leveled. Mark the ring
post ange position and remove the trim.
1.
Using the Allen key provided, remove the mounting post from the ring post. Press the mounting post
against ring post position on the wall and mark the screw hole positions.
NOTE: MAKE SURE THE ALLEN SCREW HOLE ON THE MOUNTING POST IS FACING DOWN
WHEN SECURING TO WALL.
2.
WALL
INSTALLING ON WOODEN SURFACE
For wooden surface, the mounting post can be
secured by screwing the screws directly into the wall.
INSTALLING ONTO DRYWALL SURFACE
Using a drill, pre-drill holes for the anchors. Insert the
anchors into the wall. The mounting post can be
secured by screwing the screws into the anchors.
INSTALLING ONTO A SOLID SURFACE
Measure the dimensions carefully. Using a drill,
pre-drill the holes. Secure the mounting post by
screwing the screws into the wall.
ring post mark
mounting post
913
16
"
23
4
"
17
16
"
7
8
"
87
16
"

03
Installation Instructions
Press the ring post against the mounting post. Align the ring post and secure it by tightening the set
screw.
3.
Check the ring post to make sure it is rmly secured. If not, tighten the set screw with the Allen key.4.