Santec KLASSICA 9565KL User manual

KLASSICA COLLECTION
MODEL: 9565KL
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE
Important : Please register your product online at www.santecfaucet.com within
30 days of purchase. Santec reserves the right to request additional documents
before servicing warranty requests.
0 1
MODEL: 9565KR
MODEL: 9565KT
PAPER HOLDER

02
9565KL, KR, KT _ _
PA R TS BREAK DOWN
LEF T
ROL L E R
PO S T
RIGHT
R O L L E R
POST
P O ST FLANGE WASHERS (2)
MOUNTING HARDWARE POSTS (2)
MOUNTING S C R E WS (4)
D R Y WALL T O GGLES ( 4 )
ALLEN K E Y
R O L L E R
SPRIN G
S E T SCREWS ( 2 )
SOL I D WALL ANCHORS (4)

03
PAPER HOLDER
Mark the four screw hole positions by using the Mounting Hardware
Post.
Using a drill,pre-drill holes for thetoggles.
Fold the Toggle’s leg and insert it intothe wall.
The Mounting Hardware Posts can be secured by screwing the Screws
into the Toggles.
For wooden surface, the Mounting Hardware Posts can be secured by
screwing the screws directly into the wall.
Installing On Drywall
Installing On WoodenSurface
9565KL, KR, KT _ _

04
PAPER HOLDER
Using the Allen key provided, loosen the Ring
Paper Post’s Set Screw.
Slip the Ring Paper Post with the Post Flange
Washer onto the Mounting Hardware Post.
Secure the Ring Paper Post by tightening the Set
Screw.
Mark the four screw hole positions by using the Mounting Hardware
Post.
Using adrill, pre-drill the holes.
Insert Anchors into the wall.
Secure the Mounting Hardware Posts by screwing the Screws into the
Anchors.
Installing On Solid/Hard Surface
Securing In Position
9565KL, KR, KT _ _

WARNING : Do not clean yourSANTECproduct with ammonia (Window cleaner), bleach, soaps, acids,
abrasives, harsh polishes, harsh cleaners, a coarse surfaced cloth, coarse sponge, or any type of scouring
Polished & Satin 24K Gold:The Karat mark states the percentage of pure gold -- 24K is 100 percent gold. As one of
the Earth's most precious metals, gold is the most supple and malleable of all metals. Gold-plated faucets scratch easily. To
clean, wipe down with a dry soft cloth after each use. Gold surfaces should be coated with a thin layer of non-abrasive carnauba
wax or liquid car wax up to 3 or 4 times per year. This will prevent water spotting and water deposit buildup. We recommend
using SANTEC’s Polish which has been formulated to clean and seal, leaving behind a protective coating that will resist
tarnishing and improvewater repellency.
Antique Bronze : Antique bronze simulates the antiquity of Old-World craftsmanship with a golden base color and a blend
of dark undertones. To clean, wipe down with a dry soft cloth after each use. Antique Bronze should be coated with a thin layer
of non-abrasive carnauba wax or liquid car wax up to 3 or 4 times per year. We recommend using SANTEC’s Polish which has
been formulated to clean and seal,leavingbehind a protectivecoating that will resist tarnishing andimprove water repellency.
Oil Rubbed Bronze :Oil-rubbed bronze simulates the antiquity of Old-World craftsmanship with its warm, dark brown
color and copper undertones. To clean, wipe down with a dry soft cloth after each use. Oil-rubbed bronze should be coated with
a thin layer of non-abrasive carnauba wax or liquid car wax up to 3 or 4 times per year. We recommend using SANTEC Polish
which has been formulated to clean and seal, leaving behind a protective coating that will resist tarnishing and improve water
repellency.
Polished Chrome:
use. A non-abrasive all-metal cleaner can then be applied to restore the shine. The surface can also be coated with a thin layer of non-abrasive
carnauba wax or liquid car wax. This will prevent water spotting and water deposit buildup. We recommend using SANTEC’s Polishwhich
has been formulated to clean and seal, leaving behind a protective coating that will resist tarnishing and improve water repellency.
Polished and Satin Nickel
Thank you for making SANTEC a part of your lifestyle and luxury spa experience. Our products have been created as works of
CLEAR CO ATED F I N ISHES
N O N-CLEAR COATED FINISHE S
FINISH CARE INFORMATIO N
PLEASE REGISTER YOUR PRODUCT ONLINE FOR WARRANTY SERVICES
www.santecfaucet.com/registration
SANTEC
SANTEC
A non-abrasive all-metal cleaner can then be applied to restore the shine. The surface can also be coated with a thin layer of non-abrasive
carnauba wax or liquid car wax. This will prevent water spotting and water deposit buildup. We recommend using SANTEC’s Polishwhich
has been formulated to clean and seal, leaving behind a protective coating that will resist tarnishing and improve water repellency.
:use.

This warranty does not cover:
SANTEC res erves the right to examine any product claimed defective prior to any warranty claim being accepted or processed,
o
state.
Damage due to negligence, accident, abuse, improper installation, or improper maintenance such as, but not limited to: heat
from soldering during installation, the use of plumber’s putty, damage from tools used during installation, the use or exposure
to chemicals or cleaning products either abrasive or non-abrasive, or the use of any cleaning tool or product other than a
altered or used in a manner not typical for the product.
Loss, damages, or expense, incidental or consequential whatsoever, originating from the purchase, installation, use, repair,
failure, or replacement of any
SANTEC pro ductorpart, allowed by law.
Commercial and/or Industrial installationsand use of the product.
This warranty does not include labor, travel charges, or any costs incurred for repair, removal, installation, servicing,
diagnosing, or handling of either defective or replacement parts.
1.
2.
3.
4.
5.
SANTEC is committed to enhancing your bathroom experience by creating luxury products that will provide enduring
satisfaction. Every effort has been made to satisfy the highest standards of design and production, to create lasting peace of
mind for our customers. We provide the following limited warranties on ourproducts:
This warranty extends to the original consumer purchaser only and extends for as long as the original purchaser owns the
product and the home in which the product is installed.
Please read ‘WHAT IS COVERED BY OUR WARRANTY’ and ‘EXCLUSIONS AND LIMITATIONS OF WARRANTY’ sections to
understand what is and what is not covered.Please have ready the proof of purchase (original sales receipt), description of the
problem, and carefully package the product or defective part with postage prepaid. Then, please contact your local
SANTEC
Showroom or write to SANTEC Technical Services.
LIFET I ME LIMITE D WARRANTY
LENGTH OF WA RRANTY & WHO IS COVERED BY O U R WARRANTY
WHAT IS COVERED BY OUR WA RRANTY
EXCLUSIONS ANDLIMITATIONS OF WARRANTY
TO OB TAIN WARRANTY SERVICE
SANTEC
Access should be provided to the roman tub valves for future service or repair to valves and piping. Under no
circumstances will Santec Faucet, Inc. be liable for anycosts associated with the removal of materials for future
access to the tub valves or piping for service or repair.
1.
2.
3.
Limited wa rranty agains t manufacturing defects an d tarnish to the o riginal purchaser w ith the
exclusion of kitchen drain a ssemblies which, due to the nature of t heir use, a r e not warra nted.
manufacturin g defects and tarnish to the original purchaser with th e exclusion of kitche n and
pop-up dr ain assemblies which, due to the nature of their u se, are n ot warra n ted. Kitchen
pr oducts carry a three (3) yearlimited warranty.
Cartridges: Santec Cartridges car ry a lifetime limited warranty against m anufacturing defects for
th e life of the p roduct to the original purchaser.
Parts: Santec part s carry a ten (1 0) year limited warranty against m anufacturin g defects, to the