Santec KATANA E Series User manual

E-SERIES: KATANA COLLECTION
PRESSURE BALANCEDWITH DIVERTER/TRIM ONLY
MODEL: 4735SQ
4735SR
K E EP THIS INST R U CTIONBOOKLET FOR FU T U R E REFERENC E
0 1
*4735SQ
*4735SR

0 2
Specications
Description
This product is precision engineered to provide satisfactory performance provided it is installed and
operated in accordance with our recommendations contained in this manual. In order to fully enjoy the
comfort, safety, and the reliability of your pressure balancing valve, be certain to familiarize yourself with the
contents of this manual.
Minimum operating pressure 20 psi
Maximum operating pressure 145 psi
Maximum test pressure 500 psi
Hot and cold water inlets ½" IPS
Shower outlet ½" IPS
Flow capacity 5 USgpm @ 50 psi
WALL LINE
78"
(914 mm) (1981 mm)
FLOOR
LINE
½”
½”
33"
Min 36"
Trim
plate
Handle
Set screw
Allen
key
Foam
strip
Sleeve
Finished Wall
Plate
screws
Plate
cover
(838 mm)
Diverter
sleeve Diverter
knob
Bell

Thread the diverter knob through the sleeve onto the valve-
0 3
Trim
TRIM PLATE & PLATE COVER
Fit sleeve onto valve until it bottoms out.
Place foam strip around the inner edge of the shower plate.
Press the shower plate against the wall.
Screw the 2 plate screws through the plate holes and onto the
valve’s screw holes. Tighten both screws rmly.
Fit the plate cover over the sleeve and press it all the way into
the trim plate.
-
-
-
-
-
DIVERTER
Thread the diverter sleeve onto the valve-
HANDLE
Insert the handle onto the valve stem. Turn the handle
clockwise until it reaches the end. Reposition the handle to
Using the provided Allen key, insert the set screw onto the
handle, then press the handle against the valve’s stem tighten
rmly.
Adjust the height of the handle if it is scraping against the
shower plate.
Insert the plug into the handle set screw hole.
-
-
-
-
Plate cover
Handle
Set screw
Allen key
Bell
Trim plate
Sleeve
Finished wall
Plate screws
Trim plate
C O LD
WARM
WARMER
HOT
Sleeve
Handle
Sleeve
Diverter
knob
Diverter
Sleeve
Diverter
knob
Diverter
Sleeve
Bell