Sanyo CZP2900TX User manual

Instruction
Manual Colour Television
sq//’/
CZP2900TX
TELETEXT
STEREO NICAM decoder is built in
~Table of contents
Page
Technical data .................. (1)
Main supply ..................... (1)
Aerial connection ............... (1*2)
General operation ............... (2)
Tuning
Automatic tuning .............. (3)
Manual tuning ................. (3)
Remote control .................. (4)
Operation of main remote
control key ....... (5-6)
“Teletext use
Page selection ................ (7)
Sub coded page access ......... (7)
Page
Hold .......................... (8)
Oouble letter height .......... (8)
Concealed information ......... (8)
Alarm clock ................... (8)
News flash .................... (8)
Up dated page ................. (8)
FLOF/LIST ..................... (9)
Memory of TEXT pages .......... (9)
VCR use ......................... (lo)
Audio monitor terminal .......... (lo)
External speaker connection .,,,. (10)
21-pin terminal ................. (11)
S-YHS VCR connections ........... (12)
this TV set.

Operating instructions
These are the important features of your colour TV set.
cNatural and bri IIiant colour reproduction and easy service.
QUsing the 57 function infra-red remote control transmitter, the TV set can comfortably be adjusted from your
arm chair.
#Excel lent reception of distant stations because of the ful Ielectronic UHF/VHF tuner, stabi Iized by An.
(AFT =Automatic fine tuning )
cUp to 30 broadcast stations in your reception area can be automatical Iylocated by the frequency tuning system
and stored in the memory.
oPeritelevision socket (CENELEC standard 21-pin terminals is provided, so aVCR, video disc player or other AV
apparatus can be connected.
OComplete functional safety because of automatic control of important parts and the use of modern transistors
and ICs.
Technical data
Power source ............ AC 230V, 50Hz
Power consumption ....... CENELEC normal operating condition 100W
Television system ....... System B/G
Colour system ........... PAL
Receiving channel ....... VHF 1*11
UHF 21-69
Aerial input impedance .. 750hm
AV terminal
Audio monitor out ...RCA type x2(R/L)
21-pin socket .......
S-terminal ..........
Audio input .........
Picture tube ...........
High voltage ............
Audio output ............
Dimensions ..............
CENELEC standard
S-VHS VCR standard
RCA type x2(R/L)
68cm diagonal, 110 degree
27 kV stabilized
15W x2
683(W) X599(H) X500(D)
Mains supply
tThe TV set is prepared for amains voltage 230 volts, 50 Hz, AC.
#Connect the power cord of the TV set to awal Ioutlet.
When the TV set is not to be used for an extended period of time, it is advisable to disconnect the power cord
from the power outlet.
WARNING! High voltages are used in the operation of this set. Refer service to qualified service personnel.
Aerial connection
The type of aerial required depends on factors such as the site, its distance and direction from
the transmitter, local interference etc. Your dealer wi II advice you the best type of aerial to used.
.In case 75 ohm (coaxial cable) is used for aerial input. Connect cable with IEC connector to aerial socket.
oIncase 300 ohm feeder is used for aerial socket as shown in the figure and connect feeder to tha terminal
of the adaptor.
J
300-750hm
matching box
F
To the aerial socket
3000hm ribbon ‘
-1-

Aerial connection
For all aerial circuit problems plesse consult your local
Equivalent to DIN 45 325 for combined
U/V aerial with 75 ohms coaxial cable.
Aerial plug
General operation
dealer.
Iltlllllltllltllllllllllllllllllll
Programme UP/DOWN Main ON/OFF switch
Press this button (+) or (-), and TV will step When the TV is switched on,
up or step down to the next programme position. the programme position number
The selected programme number wi II appear on is displayed on the bottom
the bottom of the screen. Iright of the screen.
*lvwlOEO -VOLUME +-PmOQ +moPOWER
-.. —.—.
D
/J“- “‘ ‘ “0’7 “] --
Y
iTV/AV switch Volume Stereo indicator Stand-by &
Increase or decrease Remote control
the sound level. accept indicator
1Programme search
&I\
a,
0“6
SEARCH
66
CONT MEMO
I\
Head phone Contrast Memory
Whi Ie using this, TV set speaker
is automatical Iyswitched off.
-2-

How to assign TV channel to programme position
This TV set 30 programme positions to enable you to assign 30 TV stations.
You can assign the desired TV broadcast stations to the programme positions.
After this, if you assign “00” number to al Ithe vacant positions, they can be skipped when
you select TV station with search key, you can select only live TV stations you assigned.
Automatic tuning Programme and TV channel number on the screen changes as fol lows:
Select the position No. you desire ❑Press the channel search
(from 0-29) with programme +P1 + key of TV set and select 4
n
P1
UP/DOWN key of TV set or remote TV station you desire. C31 (Channel No. )
control programme selection 1?
UP/OOWN key. II u
++++=+ 444 Press the memory key of TV set.
tu
❑ ❑(Your desired TV
P2 @@*Press Programme *C=* PI station is set on
UP/DOWN key. C31 the programme 1)
Note: When you select the programme number, you can input with remote control programme key:
1. One digit: Press remote control programme number (e.g. 1, 2, 3... )
2.TWO digits: First W= “-/--” key, then press 2digits of programme number (e.g. -/--, 1, 2or -/--, 2, 5)
Manual tuning Programme and TV channel number on the screen changes as follows:
Select the position No. you desire ❑First press CS key, then
(from 0.29) with programme + ~ 1 + input TV channel number+ ❑
P1
UP/DOWN key of TV set or remote (e.g. CS, 3, 1)with c--
control programme selection remote control key.
UP/DOWN key. (From 1to 9, input u
Cs, 01, ... 09 )
T
?n
P1
?C31 (Channel No. )
91I
4+4=$4=+.+4 u
fPress the memory key of TV set.
tu
uP2 *c=c= Press Programmeeec=
I_l
P1 ( Your desired TV
UP/DOWN key. C31 station is aet on
the programme 1)
Note: When using aVCR connected to the aerial socket, it would be better to select programme position “O”.
Because, when you select “O” position, the characters of “VCR” are indicated at the bottom right corner of
the TV main screen.
EVCR
-3-

Remote control
BATTERY INSTALLATION
1. Remove the battery cover by sliding it in direction of arrow.
2. Install two “AA” 1.5V batteries so that the (+) and (-) marks
on the batteries match the (+) and (-) marks inside the unit.
3. Close the battery cover.
Note: Replace the batteries when the TV set is showing the following
symptoms: Operation is unsteady or erratic, sometimes the transmitter
does not control the TV. Discharged batteries may leak and damage the
unit. The normal life of batteriea should be about nine months.
Remote control key for TV use
CANCEL (~) \
PROGRAMME Up(A)
\
PROGRAMME DOWN (T)=
PROGRAMMENUMBER
--i
FINETUNING(<>) —
BRIGHTNESS(O) —
SOUNDBALANCE( _)—
BASS(2)~
TREBLE( J)’
TV/AV SWITCH~
1
&& I
Operation of main remote control key
STATUS (~)
/DIGIT (- I
>CHANNEL
,VOLUME
I.
::
-)
SELECTION (CS)
-)
STATUS ~
When the STATUS key is pressed, the sound mode, the programme number
and the channel number of the TV station being received at the time
are displayed on the screen for about six seconds.
Note: If the selected TV station is also transmitting teletext, then
the time will also be displayed on the top right of the screen for
approximately six seconds,
—COLOR(@)
~NORMALIZATION (“+ )
=MUTE (m)
\
\
POWER (~)
\
BILINGUAL I/Ii
\
MONOKTEREO (~)
STEREO WIDE (@~ )
STATUS
11:00:25
STEREO
P21
C68
-4-

SOUND MUTE ~
Whi Ie talking on telephone, you can mute the TV sound by pressing mute
key. To switch the sound back on, press it again.
SOUND MUTE
SI
SOUNO
-------- ------ red
DISPLAY BAR
When you press the volume button, colour saturation button, brightness button, balance button, bass button,
and treble button of the remote control transmitter, the control indicator bar appears on the bottom of the
screen during pressing and for six seconds after releasing.
Each control level is indicated by the position of the green thick bar on the dashed Iinc.
When the TV set is in AV mode, both the character and the indicator bar are displayed on the TV screen too.
Note: The volume, colour, brightness, balance, bass, and treble control levels are maintained in the memory
even if the power is switched off.
VOLUME (minimum) VOLUME (maximum)
BRIGHT (minimum) BRIGHT (maximum)
BASS (minimum) BASS (maximum)
NORMALIZATION +-+
Brightness ,colour, bass and treble are set to the optimum level
automatically.
COLOUR (minimum) COLOUR (maximum)
mm
BALANCE (left side) BALANCE (right side)
mm
TREBLE (minimum) TREBLE (maximum)
mn
SOUND BALANCE ~
—
Press the (~ )key to increase sound from the right speaker and
press the (~)key to increase sound from the left speaker. So,
press it to?he point where the sound volumes of both speakers
become identical.
STEREO WIDE @@
If this key is pressed, amore ambient stereo sound is heard, and
“)WIDE(” is displayed on the screen. Press again to normal position.
NORMALIZATION
n
NORMAL
----- +8+----- white
,OUND WIDE
1STEREO
>WIDE< yellow
-5-

L
Mom /STEREO v
When receiving stereo sound, the stereo indicator
If this key is pressed, monaural sound is heard,
indicator goes out. Press again
STEREO SOUND
m
STEREO
BILINGUAL 1/11
When receiving bilingual sound,
to stereo sound.
MONAURAL
illuminates.
and stereo
SOUND
El
MONO
*C=**+
yellow
the stereo indicator illuminates.
If this key is pressad, the main or the sub sound is heard, and the
selected sound (1 or 11) is displayed on the screen by green colour,
DIRECT PROGRAMME SELECTION (The 0-29 programme )-/--
For selection of programma position 0-9, press the corresponding
button. If the required programme is more than 10, for example 23,
first press “-/--” button and enter 2, then 3,
CHANNEL SELECTION (The 01-99 channel )CS
Press the “CS’) button once to switch channel selection operation.
Using the Oto 9selection buttons, salect the channel number of
the desired TV station. Example 45, first press “CS” button. enter
4, then 5.
FINE TUNING < >
You can adjust the fine tuning by pressing the fine tuning button
on the R/C transmitter.
OFF TIMER @
Press the off timer button on the R/C transmitter, “-00 --120”
number is indicated on the top left of tha screen. Repeated
pressing of the button changes the number in 30 minutes staps. For
example, “-90” means that TV is switched off after 90 minutes. Just
one minute before switching off, “-01” and programme number you are
watching, are displayed on the screen.
off timer -lt-
–<>+
—-+
Ooy Oay
0000 aE
D-a I/n
000+
–?+
00+0
Ob&I m
Right speaker
D“ 1~Main channel
sound
I
~.d
left speaker (Mono mode)
BILINGUAL SOUND
El
1/11 green
OFF TIMER
El
-90
Note: This TV set incorporates the sleep timer function, which automatically switches off the TV set and
switches it to the stand-by mode about 10 minutes after aTV broadcast finishes or there is no longer aTV signal.
Thereafter, the TV set will not switch on even if aTV signal is input. To switch the TV set on, uae the main
switch or the ramote control transmitter.
-6-

TELETEXT use
SWITCHING TO THE TELETEXT PAGE.
Press the TV/MIX/TEXT button, then the screen changes
as follows:
E*””B+””E
?u
tBack to TV programme u
++++++++++++++++++
Page selection
OIRECT PAGE ACCESS
1
=<
>T
oo~
00
P-a
00
–?+
00
-4+
00
TW3 se -
00
o—c
—P—W*
Oq
&o
Apage can be selected with the O-9 buttons. For example, to display page 120 press buttons 1, 2 and O. The selected
page number wi II appear on the screen.
UP-DOWN PAGE ACCESS
If a page is displayed on the screen and you want to read the fol lowing page, you can press th~ UP button instead of
select ing the page number. To bring back the previous page press the DOWN button. If you keep the UP or DOWN button
pressed the page numbers wi II run up or down until you release the button.
The page number wi II change as fol lows by pressing the UP-OOWN button.
(+) P200==PP201+P202 .... P299dP200dP201 w
(-) p200~p299~p298 .... p201+P200aP299
Note: Inthe FLOF/Ll ST mode, you can access the pages directly. (See FLOF/Ll ST on page 9)
Sub-coded page access
For Teletext information which is longer than one page, it may take some time for the automatic changing of sub
pages to reach the sub page you require. It is possible, however, to enter the sub-page you require and then
continue watching the normal television picture unti Ithe correct sub-page is reached.
A. Select the required page using the page selection button.
B. Press the SUB button. The character “S” and sub code digits “****” will be displayed in top left of the
screen.
C. Enter the desired sub-page number before figure “S****” disappears, For example, if you want to select
sub-page 10, you must press O, 0, 1 and Obutton.
Then the character “+” is displayed fol lowing the page number,
D. Press the CANCEL to return to normal television programme. When the correct sub-page is reached the page
number wi II appear on the normal television picture.
E. Press the TEXT button to display the stored page.
F. To clear the sub-coded page you must enter anew page number.
Note: It is not possible to select another television station during asub-page access operation,
-7-

VIEWING TV WHILE SEARCHING FOR APAGE
Insome cases it can take some time to look for apage. Inthe IPS61 P301 I
interval you can view TV by pressing the CANCEL button. When the page
arrives, the page number will appear on the normal TV picture. Press
TEXT button to display the page.
Note: When you press the CANCEL button, the green “>“mark is
displayed at the top right of the screen. While this “>“mark is
diplayed you can not select another TV channel.
HOLO
If the teletext information is longer than one page, the pages are
automatically changed. The automatic page changing can be cancel led
by pressing the HOLD button. The word “HOLD” then appears on the top
of the screen. Normal operation is restored by pressing the HOLO
button again or entering a page number.
00UBLE LETTER HEIGHT
Either the top or bottom half of the display can be expanded by
pressing the SIZE button. When the SIZE button is pressed for the
first time, the top half of the display is expanded, If it is pressed
once again, the bottom half of the display is expanded. To return the
display to normal-sized characters, this button should be pressed a
third time.
DISPLAYING CONCEALED INFORMATION
In one of the lists of contents you may find the heading “QUIZ”
(concealed information). If you have selected the relevant page number
questions will appear on the screen. You can find out the correct
answer to the questions by pressing the REVEAL button. Press the
REVEAL button again to make the answers disappear.
ALARM CLOCK
The Alarm Clock function can be set to operate at any requested time
reminding viewers to carry out aspecific task, i.e. making a phone
call at aspecified time.
First select either page 196( BBC1) or page 296( BBC2), using the page
selection buttons. Press the SUB button, S**** will appear on the
top of the screen. Select the time at which you require the alarm
call. Example, for acall at 8.15 PM, press buttons 2015, watching
that S**** changes to S20:15. Then press the CANCEL button to
continue watching normal TV programmed. At 8:15 PM the words “ALARM
CLOCK” in large letters will appear on the screen. Press the TEXT
button to return to normal teletext operation. It is not possible to
select another TV programme when in the CANCEL mode.
L
NEWS FLASH
If you select the news flash page and view the TV programme by
pressing the CANCEL button, the moment news comes in, the word “NEWS
FLASH” and the news appears over the normal TV picture. If you want to
make the news disappear press the CANCEL button again. To recall the
news press the TEXT button,
Note: It is not possible to select another TV station during aNEWS
FLASH. You should first switch back to TV reception by pressing the TV
button. You can, however, change both the picture and sound settings,
UPDATED PAGES
There are pages which are updated as events progress, such as sports
results, news reports and traffic information. If you have selected
one of the above pages from the list of contents and you want to view
television but still be kept informed about the other events, press
the CANCEL button, The page will disappear and the TV station which
will broadcast this will appear in the screen. As soon as this page is
updated, the page number will appear on the normal TV picture. To
display the updated page on the screen press the TEXT button, The page
will disappear when the CANCEL button is pressed again.
CANCEL ITEXT I
Normal TV
picture +
TEXT
—SPORT –
— —
Hold TEXT 11:0S:20
HOLD NEWS
TELETEXT
SIZE OISPLAY ISIZE
E
TELETEXT
El
QUIZ 7
Piee awe:..
TELETEXT
I
Set Alarm Call
❑
News Flash
❑
P300
Sport
Football
E
~DISPLAY
SIZE
QUIZ ?
+ANSWER !
REVEAL
+
Time
CANCEL
.zee FouND
ALARM CLOCK
TV
Alarm Call
+Normal TV
+picture
TEXT
CANCEL
Psoo
+Normal TV
+picture
-8- TEXT

Note: It is not possible to select another TV station during an
UPDATE. You should first switch back to TV reception by pressing the
TV button. You can, however, change both the picture and sound
settings.
FLOF AND LIST (FLOF: Ful Ilevel one feature )
When abroadcasting station provides FLOF service, you can access the
text pages you desire quickly and easi Iy.
FLOF
Inthe text mode, FLOF mode can be selected by pressing FLOF/Ll ST
button.
Then the index page which the broadcasting station provides, appears
on the screen. At the bottom of the screen, red, green, yel low and
cyan letters and “F“lettars are indicated.
You can select aprogramme out of four programmed, by pressing one of
the coloured buttons on the R/C transmitter.
For example, when pressing red, the red colour programme is selected.
Inthe same way, you can select the programme which is indicated at
the bottom of the screen by pressing the colour button,
To get back to the initial index page, press the “INDEX” button.
LIST
Inthe LIST mode, the four coloured page numbers and “L“letter are
indicated on the bottom of the screen. The number on the left side is
enclosed by ared frame. First, input the page number you desire, into
each coloured position using the digit buttons, then press the “STORE”
button within two seconds.
When the page number is memorized, the four coloured numbers change
into white frame momentari Iy.
After you memorize the four page numbers, you can select the page you
desire by pressing the red, green, yel low or cyan button.
Even if you select another page by inputting anew page number, (See
direct page selection ), the memorized pages return after switching
power off or changing the programme position
button.
NON FLOF SERVICE
When the station does not have FLOF service,
or pressing the INDEX
and you press the FLOF
mode button, the INOEX page (P1OO )is automatically displayed.
At the bottom of the screen, the four page numbers 100, 199, 101, 102
are also displayed.
Then, when you select arandom page number out of the displayed four
pages by pressing acolour button, the text of that page is displayed.
The selected page minus one, plus one, and plus two page numbers are
displayed but their display order is at random. Of course at any time
you can select new pages by inputting new page numbers.
MEMORY OF THE TEXT PAGES
When you assign abroadcasting station which is providing aTEXT
service to some programme positions of your TV set, four pages of TEXT
can be memorized on each programme position 0-15.
(To memorize the TEXT pages, see “LIST mode “) If it is required to
have more than four instant text pages avai Iable from the same text
service, tune the necessary number of programme positions to the same
TV channel.
i.e. TV programme position O.... page,300,301,302,303
1.... page,304,305,306,307
2.... page,308,309,310,311
$,
!,
I
I(
i5... page,411,4i2,413,414
FLOF mode
TEXT INDEX
FNews Sport TVguide Weather
Red’ Green Yellow Cyan
NEWS
FNews Sport Citynews Travel
Red’ Green Yellow Cyan
LIST mode
F
k
Red’ Grwn Yellow Cyan
Red frame
d
The memory capacity is 16 lwogramme positions and four pages per each position.
-9-

VCR use
For VCR use set the TV/VCR switch to “VCR” position.
STOP BUTTON
Use to stop the
PLAY BUTTON
Use to playback
FFICUE
movement of the tape.
the tape. CHANNEL UPIDOWN —
Use to advance the tape at fast speed, or in order
to playback the tape at fast speed.
REW/REV IEW
Use to rewind the tape, or in order to playback
the tape in reverse at fast speed.
RECORO
Use to record on the tape. Press two buttons at the same time.
PAUSE/STILL
Use to temporarily stop (Pause) the tape when recording,
or in order to see astill image during playback.
PROGRAMME UP 00WN +/-
Use to change the programming position for the VCR. REWIND/REVIEW—
RECORD—
Note: This remote control transmitter has been designed especially
to be used in conjunction with selected SANYO VCR’S.
bSome SANYO VCR’s may have their own functions, so please refer to
the individual instruction booklet when using this remote control
with SANYO VCR’s to ensure compatibility.
Audio terminal
D-a
00
–>+
00
–6+
00
H-H-c
-\&
More powerful sound can be enjoyed by using your audio apparatus. Connect the audio
signal source from audio-monitor-out terminal to the Iine-in or aux terminal of the
audio apparatus.
Next, adjust the volume control on the audio apparatus to your desired volume level.
(The sound is not affected by the volume control on the TV, therefore set to a
minimum volume level ).
External speaker connection
w
Rear panel
Speaker selection
‘“H
—VCR/TVSWITCH
/‘My
—FAST/CUE
>PAUSE/STILL
\sop
Note: Inthis case, set “Speaker selection” switch to the “EXT” position.
Connect R/L speaker to R/L terminal respectively.
-1o-

21 pin terminal
Apersonal computer, VCR, video disc player or other AV equipment
can be connected to the 21-pin socket on the rear of the TV set.
QThe connector (CENELEC standard 21-pin type )should be wired as
iIlustrated below.
tThe 21-pin plug with cable is obtainable from your local dealer.
QFor this connection and adjustment, refer to the operating
instructions for the personal computer etc.
CONNECTiON
The specification of the 21-pin connector is as follows:
Pin No. Signal
1. Audio output (right channel) 0.5 Vrms/under lK ohm
2. Audio input (right channel) 0.5 Vrms/upper 10k ohm
3. Audio output (left channel) 0.5 Vrms/under lk ohm
4. Earth (audio)
5. Earth (blue)
6. Audio input (left channel) 0.5 Vrms/upper 10k ohm
7. Blue (B) input 0.7 Vp-p/75 ohm
8. Function switching (TV/EXT. )L: O-2V, H: 10e12V
9. Earth (green)
10.
11. Green (G) input 0.7Vp-p/75 ohm
12.
13. Earth (red)
14. Earth
15.Red (R) input
16. Fast blanking
17. Earth (video)
18. Earth
19. Video sync. output
20. Video sync. input
21. Earth (case)
0.7Vp-p/75 ohm
L: O-O.4V, H: 1-3V
lVp-p/75 ohm
lVp-p/75 ohm
USE OF THE 21-PIN TERMINAL
If the 21-pin terminal is used for connection of video equipment,
audio equipment or apersonal computer, note the following points.
A. Use of video equipment
For playback of VCR tapes or video disc, use equipment which has a
pin-8 input function signal.
When equipment which has this function signal is used, the TV set
is automatically switched to the video mode, and the remote-control
unit cannot be used for TV/VIDEO switching.
For VCR recording, the existence or not of the function signal has
no effect. When the equipment which does not have this function
signal is used, TV aet should be switched to AV mode by pressing
TV/AV button.
B. Use of the personal computer
The personal computer must be the type which has apin-8 function
signal and a pin-16 fast signal (TV/RGB switching), Apersonal
computer which does not have these two signals cannot be used. If
the personal computer has RF output terminal, it can be used making
the connection to the aerial terminal.
El
Pe,,.,..lc.mD”,,# (m., o.lc.u, ,wm..l,
-11-

S-VHS VCR connections
S-VHS VCR is designed with ahighly advanced techniques. So the visual quality of S-VHS VCR is better than the
other popular VHS VCR. S-VHS VCR can be enjoyed by using S-terminal.
Example of S-VHS VCR connection
S-terminal in
NIT ml
E“l ,,T
I
~A.dioout ~S-terminalout
RL
-S-VHS VCR
Input terminals
Inorder to watch the playback from the S-VHS VCR, the output termimal of the VCR in use must be connected to the
S-terminal in and Audio-in terminals and then select the video mode with TV/AV key.
If the audio signal from the VCR is stereo, be sure to connect the right and left channels to the respective right
and left Audio-in terminals. If the external audio signal is amonaural one, connect it to the right or left
terminal of Audio-in. Then select the monaural mode and the audio channel in the TV set with the remote control
mono/stereo and I/1 Ikey.
Prior to connecting the S-VHS VCR, be sure to careful Iyread the instruction booklet of the equipment involved.
-12-

4
Part No.3P1O198 D!3YV Suy’tlwio
SANYO Electric Co., Ltd. ,