Saso CS-10N User manual

Safe/ATM Detector
CS-10N
Installation Instructions
•Features
- Compact Design
- Non Polarity Output
•Function
- Dual Tamper Switch
1P t
Note: This sensor is designed to detect intrusion and to initiate an alarm,
it is not a burglar-preventing device. Maker is not responsible for damage, injury or
losses caused by accident, theft, acts of God (including inductive surge by lightening),
abuse, misuse, abnormal usage, faulty installation or improper maintenance.
1
.
P
ar
t
s
①Joint ②Sensor ③Bracket
Mounting
Hole LED magnetic Mounting plate
2. Installation
Tamper S/W Tamper S/W
Setting
Hole
①Install bracket using tape. ③Install joint part using tape and/or screw
3. Alarm Setting
1) Alarm Setting On 2) Alarm Setting Off
SAFE SAFE

4. Wiring
①
①
②
③
④
⑤
⑥
NO Color Use NO Color Use
1 Red + 12v 4 Blue Normal Close
2 Black GND 5 Yellow Normal Open
3 Green Common 6 YL/WH Normal Open
Sensitivity Adjustment
Adjust by rotating the switch
5. Sensitivity Adjustment
DOWN
UP
6. Specifications & Dimension
Model
Voltage
Current
Temperature
Ot tT
CS-10N
DC 9.6 ~ 15V
30mA(MAX)
-10℃~ 55℃
DCtt1C
O
u
t
pu
t
T
ype
Detection
LED
Tamper S/W
Install Site
Material
Weight
Dimension
D
ry
C
on
t
ac
t
1C
4M (9.8N시)
Before Detection : ON / After Detection: OFF
Dual Tamper
Inddor
ABS Resin
Sensor:170g, Bracket:55g, Joint:85g
Joint : 62x89x28mm, Sensor : 62x118x28mm
(WxLxH) Bracket : 73x120x15mm
* Caution : Please refer to the instruction manual to ensure proper operation of the product.
Specifications and designs are subject to change without prior notice for improvement.