Saso SASO-SH10 User manual

Shock Detector
SASO
-
SH10
Installation Manual
SASO
-
SH10
•Features
- Compact Design
- Dry Contact Relay Output
- Digital Filtering
•Functions
- Tamper Switch
- Reset Function with Timer
- Sensitivity Adjustment Function
Note : This sensor is designed to detect intrusion and to initiate an alarm,
it is not a burglar-preventing device. We are not responsible for damage, ,injury
or losses caused byaccident, theft, natural disasters, abuse, misuse, abnormal usage,
faulty installation or improper maintenance.
1. Installation
①Unscrew the bottom and
open the cover ②Install detectors using tape and/or screws ③Install detectors between the pillars
.
Detectors
2. Parts
Itllti Hl
LED Tamper Switch
Tamper Switch
I
ns
t
a
ll
a
ti
on
H
o
l
e
Front Back
3. Functions
Reset Time
First Shock
ON : Setting
Reset Time
A few seconds after the initial shock, the detectors resets DIP 1 Off)
OFF : Alarm

4. Wires
①
②Color
RED
BLACK
GREEN
Use
VCC(12V)
GND
Common
③
④
⑤
⑥
NO
1
2
3
NO
4
5
6
Color
BLUE
YELLOW
YL/WH
Use
Normal Close
Normal open
Normal open
Adjust sensitivity on the PCB
5. Sensitivity Adjustment
Increase
Sensitivity
Decrease
Sensitivity
6. Operation
1. Detector operates when more than 2 shocks are detected
2. The second shock must follow within 20 seconds after the initial shock
3.Tamper switch prevents intruders removing detector from wall
4. Alarm sound will go off when the wire is cut
7. Cautions
1. Install detector with minimizin
g
the len
g
th of cables. Check the tam
p
er switch o
p
erates.
8. Specifications
Voltage
Current DC 9.6 ~ 15V
33mA
(
Max
)
gg p p
2. Avoid installing detectors where frequent vibrations occur.
Temperature
Output
Detection Range
Install Site
Material
Weight
Dimension
()
-10℃~ 55℃
SPDT tYPE
4M (9.8N)
Inddor
ABS Resin
90g
62x89x27mm
62
27
89
* Caution : Please consult the instruction manual to ensure safe and proper operation of the product.
Specification and design are subject to change without prior notice for improvement.
62
27