SCAN 22 User manual

SCAN 22
S
C
A
N
S
C
A
N
S
C
A
N
S
C
A
N
INSTRUCTIONS FOR
INSTALLATION AND USE
This manual is accompanied by a pam-
phlet with General Instructions for
Installation. 10.04 - GB
Approved according to DIN 18891

Ceramic smoke deflector
In order to dismount the ceramic smoke deflector, lift up the
plate and take it down while holding it at an angle.
You have chosen a product from one of Europe's leading
manufacturers of wood-burning stoves. We are convinced
that your stove will be to your full satisfaction and give you
many hours of pleasure if you follow the advice and instruc-
tions of this manual.
Please read this manual as well as the General
Instructions for Installation before beginning the
installation.
Congratulations on your new SCAN
stove!
SCAN
S
C
A
N
2
4
3
1
1 Ashtray. The ashtray is placed below the combustion
chamber. Attention! Be careful when you empty ashes
from the stove. There may be embers left for up to 24
hours after the stove was last used!
2 Handle for shaking grate. The stove is equipped
with a shaking grate. When you activate the grate
handle, the ashes from the combustion chamber are
emptied into the ashtray.
3 Regulation for primary air. Turn the air valve in
order to open. The primary air is used when lighting
and refuelling the stove. It should always be closed
during continuous firing.
4 Regulation for combustion air. Push the button
sideways. Left position is closed and right position is
open. The air is used for the combustion and
regulates the output of the stove.
Adjustment of the air
SCAN 22
The ashtray, shaking grate, and primary air should
always be closed during continuous firing.
Wood / briquettes Fuel kg/h (beechwood
max. 20% humidity)
SCAN 22 2,2 kg
Combustion air % 100
Primary air % 0-25

S
C
A
N
S
C
A
N
Adjustment of the handle
You can adjust the handle by loosening the screw
opposite the handle. The vertical position of the hand-
le can be adjusted with the other screw.
Accessories
For this model you can have the following accessories:
SCAN
S
C
A
N
Handle
The door is opened by turning the handle counter-
clockwise.
Adjustment screws
The stove has two adjustment screws
on the bottom that can be used for
levelling the stove.
Self-closing door (BA 1)
The door is prepared with a self-closing function at the facto-
ry. If you tighten the spring with the hexagon spanner, the door
will close automatically when you let go of it.
• Soapstone top plate
• Baking-compartment door
• Connection piece for fresh-air
intake
• Steel floor plate
• Small grill
SCAN 22
Data for calculation of the chimney
Stove
model
SCAN
Connecting
adaptor
mm
1
Density of
flue gas
flow
g/s
2
Flue gas
tempera-
ture
oC
3
Minimum
draft
Pa
4
Density of
flue gas
flow
g/s
5
Flue gas
temperature
oC
6
Minimum
draft
Pa
7
0,8
Minimum
draft
Pa
22 150 21 250 10 6 350 14 11
With closed doorsWith open doors
Column 2 and 5 show the flue gas temperature in the connecting adaptor
Column 3 and 6 show the lowest/minimum draft in Pa by rated value
Column 7 shows the lowest/minimum draft in Pa by 0.8 x rated value
The stove can be prepared for an external air supply where
fresh air is let directly into the combustion chamber (must be
mounted from the factory).

Krog Iversen & Co. A/S - DK-5492 Vissenbjerg
180
530
530
890
742
200
Warranty Conditions
All SCAN wood-burning stoves and inserts are made of first-class material
and are subject to a strict quality control before they leave the factory.
However, if an error should occur, we back all SCAN wood-burning stoves
and inserts with an extensive, five-year limited warranty.
See also the General Instructions for Installation delivered with your
stove for more details.
Technical info
Rated output: 7 kW
Min./max.: 3 - 9 kW
Weight: 130 kg
Connection piece, diameter: int. 135 mm / ext. 148 mm
*
**
*To the middle of the rear outlet
**Connection piece to fresh air intake
Distances to flammable materials
(mm)
Production number
Write the production number of your
stove here so that you have it at hand in
case you need to contact us.
You can choose between several floor plates in
different shapes and dimensions for your stove.
Please contact your local authorities concern-
ing the security distances needed.
SCAN 22
200
Base plate
Radiation area
500
300
800
800
You should read this manual as well as the General Instructions for Installation before beginning the installation.