SCAN 87 User guide

87
ASSEMBLY AND INSTRUCTIONS MANUAL SCAN 87
UK SCAN
UK - ASSEMBLY AND INSTRUCTIONS MANUAL
SCAN 87

2
87
UK SCAN
You have purchased a product by one of Europe’s leading manufacturers of
wood-burning stoves, and we are sure that you will have years of pleasure from your
purchase.
To make the best possible use of your stove, it is important that you
follow our advice and instructions. Read through this Assembly and Instruction
Manual carefully before you start to assemble your stove.
CONGRATULATIONS
ON YOUR NEW SCAN
WOOD-BURNING STOVE
SCAN 87
FLOOR
SCAN 87
WALL

3
TABLE OF CONTENTS
¬¬ TECHNICAL DATA 4
Installation 4
Safety 4
Technical data and dimensions 5
Dimension sketch and minimum distances 6
Type plate 8
Product registration number 8
¬¬ ASSEMBLY 9
Tools needed for mounting of the stove 9
Loose parts 9
Additional accessories 9
Disposal of packaging 9
Fresh air intake 9
Closed combustion system 10
Existing chimney and pre-fabricated element chimney 10
Connection between built-in stove and steel chimney 10
Requirements for chimney 11
Distance to furniture 11
Safety distance 11
Removal of packaging 12
Fitting the slingbar 14
Removal of transport safety 14
Door (Self-closing) 15
Mounting of wall-hung model 16
Mounting of external air supply on the wall fitting 18
Height adjustment of stove 19
Fitting the flue connection piece 21
Disassembly of top plate in top outlet 23
Mounting of cleansing lid 23
Heat-storage system 24
Mounting of combustion chamber 25
Load-bearing foundation 27
Floor plate 27
¬¬ INSTRUCTIONS FOR USE 28
CB-technology (Clean Burn) 28
Primary air 28
Secondary air 28
Baffle plate 28
Ash container 28
¬¬ INSTRUCTIONS FOR HEATING 30
Environmentally-friendly firing 30
Lighting 30
Continuous operation 31
Warning about over-firing 31
Using the stove in various weather conditions 31
Firing in the spring or autumn 31
The function of the chimney 31
Chimney fire 32
General notes 32
¬¬ HANDLING OF THE FUEL 33
Selecting wood/fuel 33
Preparation 33
Storing 33
Moisture 33
Use of the following as fuel is illegal 33
Calorific value of the wood 33
¬¬ MAINTAINANCE 34
Sweeping the chimney and cleaning the stove 34
Checking the stove 34
Servicing 34
Combustion chamber lining 34
Gaskets 34
Painted surfaces 34
Removal of baffle plates and combustion chamber lining 35
Disposal of stove parts 35
Cleaning the glass 36
¬¬ TROUBLESHOOTING 37
¬¬ WARRANTY 38

4
TECHNICAL DATA
INSTALLATION
¬ The house owner is responsible for ensuring that installation and assembly are in accordance with national and local building
regulations as well as the information provided in this Assembly and Instruction Manual
¬ When you install any kind of fireplace or stove, you must inform the local building and housing authorities. In addition you are
obliged to have the installation inspected and approved by a local chimney sweep prior to commissioning
¬ To ensure best-possible functionality and safety for your installation, we advise you to call a professional fitter. Your Scan
Dealer will be able to recommend a qualified fitter in your area. For information on Scan Dealers, please go to
www.scan-stoves.com
SAFETY
Any changes made to the product by the dealer, fitter or user could result in the product and safety functions not functioning as
intended. The same applies to the fitting of accessories or extra equipment not supplied by Scan A/S. This could also be the case
if parts that are necessary for the operation and safety of the stove are dismantled or removed.
YOU GET THE BEST USE OF
THE STOVE BY USING
A TOP-DOWN
LIGHTING METHOD
SEE
"INSTRUCTIONS FOR HEATING"
PLEASE NOTE!

5
TECHNICAL DATA AND DIMENSIONS
The stove can take logs up to 50 cm (vertically placed).
Intermittent operation in this context means normal use of
a wood-burning stove. In other words, you should let the fire
die down until only the embers are left before refueling.
This stove is produced in accordance with type approval for
the product, which also covers the product’s Assembly and
Instruction Manual.
The Declaration of Performance (DoP) is available from
www.scan-stoves.com
Test in compliance with EN 13240
CO Emission at 13% O20,07 %
CO Emission at 13% O2929 mg/Nm3
Dust @ 13% O227 mg/Nm3
Nox@ 13% O296 mg/Nm3
Efficiency 84 %
Energy efficiency index 112
Energy efficiency class A+
Nominel output 11,5 kW
Chimney temperature EN 13240 168 °C
Temperature in flue conn. piece 202 °C
Amount of smoke 12,9 g/sec
Sub-pressure EN 13240 12,7 Pa
Recommended sub-pressure in
connecting piece 18 Pa
Required combustion air supply 38 m3/h
Fuel Wood
Fuel consumption 3,2 kg/h
Amount of fuel 2,55 kg
Amount of fuel, max. 4,8 kg
Surface treatment Senotherm
Max. wood length 40 cm*
Weight Scan 87 approx. 273 kg
Weight Scan 87 wall-hung approx. 250 kg
Connecting piece internal diameter 194 mm
Connecting piece external diameter 198 mm
Fresh air connection piece external diameter 125 mm
Approval type Intermittent fuelling**
Materials
Stainless steel plate
Cast iron
Ceramic stone/vermiculite
Glass
*
**

6
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087001.idw
90087001
Målskitse - fritstående
13-07-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
549
628
632
1886 630
154*
1712
533*
1832***
100
254
699
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087002.idw
90087002
Målskitse - fritstående (afstand til brændbart)
16-10-2019 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
500
X
Y
1300**
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087004.idw
90087004
Målskitse - væghængt (afstand til brændbart)
02-02-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
X
Y
1300**
500
350
900
900
360°
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087006.idw
90087006
Opstillingstegning (afstand til brændbart materiale)
02-02-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
913
647
300
1289
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087003.idw
90087003
Målskitse - væghængt
13-07-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
628
680
138*
1317
1437***
154*150
304
699
549
240
1491
DIMENSION SKETCH AND MINIMUM DISTANCES
Scan 87 - freestanding Scan 87 - wall-hung Flammable ceiling and floor
All distances are in mm. All distances are minimum distances * Connection of fresh-air intake Ø 125 mm ** Min. distance to furniture/flammable material *** Height to the beginning of flue connecting piece at top outlet
Floor plate
X / Y according to national laws and regulations
Flammable material
Radiation zone

7
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087005.idw
90087005
Opstillingstegning (afstand til brændbart materiale)
02-02-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
50*
800
304*
680*
1146
900
900
360°
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087006.idw
90087006
Opstillingstegning (afstand til brændbart materiale)
02-02-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
913
647
300
1289
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087008.idw
90087008
Opstillingstegning (afstand til brandmur)
02-02-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
768
1148
150
494
1520
1520
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087007.idw
90087007
Opstillingstegning (afstand til brandmur)
02-02-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
500
304
680
1480
1693
800
50
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087007.idw
90087007
Opstillingstegning (afstand til brandmur)
02-02-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
500
304
680
1480
1693
800
50
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087007.idw
90087007
Opstillingstegning (afstand til brandmur)
02-02-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
500
304
680
1480
1693
800
50
MINIMUM DISTANCES
Flammable material Fire wall, e.g. 50 mm Jøtul Firewall, 110 mm brick or other material with corresponding fireproof and insulating abilities
All distances are in mm. All distances are minimum distances * Half-insulated chimney / shielded flue pipe (The requirements to the chimney and the flue pipe in terms of safety distances must be met)
Minimum distance to flammable materials
Minimum distance to flammable wall protected by a fire wall

8
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087033.idw
90087033
Scan 87 typeskilt
20-10-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
Typeplate
PRODUCT REGISTRATION NUMBER
All Scan wood-burning stoves are provided with a product registration number. Please make a note of this number at the rear
page of this manual; you will always need to quote it when contacting your dealer or Scan A/S.
The product registration number is located at the rear of the stove.
Type plate
Product
registration number
Product registration number
TYPE PLATE
All Scan wood-burning stoves are fitted with a type plate that specifies the approval standards and the distance to flammable
materials.
The type plate is located at the rear of the stove.

9
ASSEMBLY
TOOLS NEEDED FOR MOUNTING OF THE STOVE
¬ Spirit level ¬ Combo wrench 10 mm
¬ Cutting nippers ¬ 3 allen keys (2,5 mm, 4 mm & 5 mm)
LOOSE PARTS
In the stoves combustion chamber you will find the following loose parts:
¬ Glove ¬ 1 connecting piece for fresh air inlet
¬ 1 flue connection piece 180 mm (int. flue pipe) ¬ 1 flue connection piece 190/200 mm (int./ext. flue pipe)
¬ Seal for the connecting piece ¬ Dekor plate for top plate
¬ Top back plate ¬ Screw M5x16 mm (Only used in Norway)
¬ Baffle plates ¬2 pins for baffle plates
¬ Slingbar
ADDITIONAL ACCESSORIES
¬ Small shaped floor plate in glass ¬ Large shaped floor plate in glass
¬ Heat accumulating stones (6 items approx. 100 kg) ¬ Cleansing lid for rear outlet
¬ Fresh air adapter rear (wall-hung)
DISPOSAL OF PACKAGING
Your Scan stove may come supplied with the following packaging:
Wood packaging The wood packaging can be reused and after final use can be incinerated as a CO2neutral
product or sent for recycling
Foam Send for recycling or waste disposal
Plastic bags Send for recycling or waste disposal
Stretch/plastic film Send for recycling or waste disposal
FRESH AIR INTAKE
In a well-insulated house, the air used up by the burning process has to be replaced. This particularly applies to houses with
mechanical ventilation. There are different ways of making sure that an air exchange takes place. The most important thing is to
ensure that there is a supply of air to the room where the wood stove is located. The external wall vent must be located as close
to the wood stove as possible, and you must be able to close it when you are not using the wood stove.
National and local building regulations must be followed with regard to the connection of fresh-air intake.

10
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087011.idw
90087011
Scan 87 produktregistreringsnummer
04-11-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087010.idw
90087010
Scan 87 friskluft
04-11-2021 KEN
Scan 87
VÆGT:
AREAL:
537,44 kg
48038358 mm^2
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068058.idw
90068058
klargøring til vægbeslag
12-05-2015 hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
EXISTING CHIMNEY AND PRE-FABRICATED ELEMENT CHIMNEY
If you intend to connect your stove to an existing chimney, it makes sense to contact an authorised Scan dealer, or a local chim-
ney sweep, for advice. These experts will also let you know if your chimney needs renovating.
¬ When connecting a pre-fabricated element chimney, follow the manufacturer’s connection instructions for the
relevant chimney type.
CONNECTION BETWEEN BUILT-IN STOVE AND STEEL CHIMNEY
Your Scan dealer, or local chimney sweep, can advise you on choosing a make and type of steel chimney. This ensures that the
chimney will match your wood-burning stove.
If you want external combustion
air via a wall, remove the cover
plate at the rear of the stove with
a pair of cutting pliers
External
combustion air
via wall
External
combustion air
via floor
CLOSED COMBUSTION SYSTEM
You should use the closed combustion system for the wood-burning stove if you live in a newly-built, airtight home.
External combustion air is connected through a ventilation pipe via the wall or floor.
We recommend mounting a valve in the ventilation pipe in order to avoid condensate in the stove and the pipe system, when the
stove is not in use. It can also be an advantage to insulate the ventilation pipe.
Minimum Ø 125 mm ventilation pipe, maximum length: 6 metres with a maximum of one bend. We recommend smooth steel
pipes.
Connecting piece for fresh air inlet is loose in the stove.
If the external combustion air is connected at the rear, the dismounted plate must be mounted on the hole for external air in the
bottom of the stove. For wall-mounted model (wall) a special fresh air adapter (accessory) is used.
NOTE: if the stove has a fresh air connexion or closed combustion, the ventilation pipe must be open, when the stove is in use!

11
REQUIREMENTS FOR CHIMNEY
The chimney must have a minimum internal diameter of 180 mm (200 mm is recommended) and have a T400 designation, with G
for the soot fire test. The length should be min. 4,5 metres.
If the chimney is fitted with a smoke extractor, it must be possible to adjust it to a suitable draft.
The requirements to the chimney and the flue pipe in terms of safety distances must be met.
¬ Choosing the wrong length or diameter of chimney could impair functionality
¬ Always comply exactly with the instructions provided by the chimney supplier
DISTANCE TO FURNITURE
Distance to furniture from glass: 1300 mm.
You should however assess whether furniture or other items might become excessively dry due to being too close to the stove.
SAFETY DISTANCE
European, national and local regulations concerning safety distances for wood-burning stoves must be complied with.
The stove must be set up so that the stove itself, the flue pipe, and the chimney can all be cleaned.

12
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087051.idw
90087051
Scan 87 - Afmontage fra transportpalle
13-09-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
21
43
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087048.idw
90087048
Scan 87 - Palle
13-09-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087051.idw
90087051
Scan 87 - Afmontage fra transportpalle
13-09-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087052.idw
90087052
Scan 87 - Afmontage fra transportpalle
13-09-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087049.idw
90087049
Scan 87 - Afmontage fra transportpalle
13-09-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
REMOVAL OF PACKAGING
Check that the stove is not damaged before starting to install it.
The stove comes attached to a wooden pallet on delivery. The packaging is stable enough for the unpacked stove to be laid down.

13
6
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087055.idw
90087055
Scan 87 - Afmontage fra transportpalle
19-01-2022 KEN
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087054.idw
90087054
Scan 87 - Afmontage fra transportpalle
19-01-2022 KEN
VÆGT:
AREAL:
N/A
N/A
5
7
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087055.idw
90087055
Scan 87 - Afmontage fra transportpalle
19-01-2022 KEN
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087054.idw
90087054
Scan 87 - Afmontage fra transportpalle
19-01-2022 KEN
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087053.idw
90087053
Scan 87 - Afmontage fra transportpalle
17-01-2022 KEN
VÆGT:
AREAL:
N/A
N/A
8
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087055B.idw
90087055B
Scan 87 - Afmontage fra transportpalle
19-01-2022 KEN
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087055B.idw
90087055B
Scan 87 - Afmontage fra transportpalle
19-01-2022 KEN
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087017.idw
90087017
Scan 87 - Topplade af og pakning sættes pårøgstuds
17-01-2022 KEN
VÆGT:
AREAL:
N/A
N/A
REMOVAL OF PACKAGING
Screws are saved
for mounting the
flue connection piece

14
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087077.idw
90087077
Scan 87 - Afmontage af transportsikring
30-09-2021 KEN
Scan 87
VÆGT:
AREAL:
539,68 kg
48194104 mm^2
2
1
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087077.idw
90087077
Scan 87 - Afmontage af transportsikring
30-09-2021 KEN
Scan 87
VÆGT:
AREAL:
539,68 kg
48194104 mm^2
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087047.idw
90087047
Scan 87 - Løfteåg
19-01-2022 KEN
VÆGT:
AREAL:
538,86 kg
48244513 mm^2
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087047.idw
90087047
Scan 87 - Løfteåg
19-01-2022 KEN
VÆGT:
AREAL:
538,86 kg
48244513 mm^2
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087047.idw
90087047
Scan 87 - Løfteåg
19-01-2022 KEN
VÆGT:
AREAL:
538,86 kg
48244513 mm^2
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087017.idw
90087017
Scan 87 - Topplade af og pakning sættes pårøgstuds
17-01-2022 KEN
VÆGT:
AREAL:
N/A
N/A
FITTING THE SLINGBAR
If you want to lift Scan 87 with a crane, the included slingbar can be used.
IN THE TOP OUTLET
REMOVAL OF TRANSPORT SAFETY
The stove comes with clamped weights.
These must be released when the stove is placed in the right place.
Remove 2 screws on each inside of the stove with a
10 mm open-end spanner
Lift the top plate off the stove
Slingbar

15
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087046.idw
90087046
Scan 87 - vægtlodder
19-01-2022 KEN
VÆGT:
AREAL:
538,86 kg
48244513 mm^2
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087046.idw
90087046
Scan 87 - vægtlodder
19-01-2022 KEN
VÆGT:
AREAL:
538,86 kg
48244513 mm^2
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087046.idw
90087046
Scan 87 - vægtlodder
19-01-2022 KEN
VÆGT:
AREAL:
538,86 kg
48244513 mm^2
DOOR (SELF-CLOSING)
The door is delivered without self-closing function (Bauart 1). Adjustment is made by removing or adding weights.
If you want a self-closing door, you can remove half of the weight discs in each inside of the stove from the counterweight.
Remove transport safety
- is not to be remounted

16
1
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087060.idw
90087060
Scan 87 - væghængt
17-02-2020 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087061.idw
90087061
Scan 87 - vægophæng
14-07-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
Min. 82 mm
1028 mm
40 mm
Min. 257 mm
Min. 1200 mm
Min. 1510 mm
1400 mm
Lift the wall bracket off the stove.
Draw a vertical line on the wall (you can use a spirit level).
Use this line for the mounting of the wall fitting
MOUNTING OF WALL-HUNG MODEL
Installation must be planned and executed in accordance with
national and local building regulations.
The stove must only be fitted to a non-flammable wall. There
must be no form of flammable component in the wall.
To ensure correct installation we recommend that a building
expert and a local chimney sweep be commissioned to plan
and outline the installation with a view to subsequent
approval.
For wall installation we recommend using the wall brackets
supplied.
If a chimney is installed on top of a wall-hung model, the
chimney must be fully self-supporting. It must not rest on
the wood-burning stove. There must be a distance of at least 6
mm between the first section and the flange on the flue collar.
Please consult a specialist.
Scan A/S disclaims all liability for the installation of
wall-hung wood-burning stoves.

17
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068058.idw
90068058
klargøring til vægbeslag
12-05-2015 hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
x x
3
2
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087071.idw
90087071
Scan 87 - vægophæng
12-05-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087071.idw
90087071
Scan 87 - vægophæng
12-05-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
4
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087072.idw
90087072
Scan 87 - vægophæng
12-05-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087072.idw
90087072
Scan 87 - vægophæng
12-05-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIM.:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Bygningsdele\Skruetrækker.ipt
Plade, st. 240
Skruetrækker
18-01-2006 sr
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3 NR.:
5
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087072.idw
90087072
Scan 87 - vægophæng
12-05-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
Min.
82 mm
Now hook the stove onto the wall fitting on the wall
If you want an external air supply, it should be mounted
on the wall bracket now. (See instructions in this
manual at page 18).
Measure from the vertical line.
Drill the necessary holes and mount the wall bracket with
the screws
MOUNTING OF WALL-HUNG MODEL
Rejust
If you want a rear outlet, see page 21 in this manual

18
2
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087075.idw
90087075
Scan 87 - væghængt friskluftsstuds
17-06-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087073.idw
90087073
Scan 87 - væghængt friskluftsstuds
17-06-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087074.idw
90087074
Scan 87 - væghængt friskluftsstuds
17-06-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087075.idw
90087075
Scan 87 - væghængt friskluftsstuds
17-06-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
1
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087078.idw
90087078
Scan 87 - væghængt friskluft
15-09-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087078.idw
90087078
Scan 87 - væghængt friskluft
15-09-2021 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 87\90087083.idw
90087083
Scan 87 - væghængt friskluft
15-09-2021 KEN
VÆGT:
AREAL:
N/A
N/A
MOUNTING OF EXTERNAL AIR SUPPLY ON THE WALL FITTING
If you choose to connect the stove with fresh air as a rear outlet, the stove must be mounted to the wall with a fresh air adapter.
The fresh air adapter can be purchased from your local Scan dealer.
If you do not want an external air supply, it is not necessary to mount the duct tube or the connecting piece.
External
combustion air
via wall
Aire de
External
combustion air
via floor
(ACCESSORY)
Remove the cover in the rear outlet of the stove.
Fit the cover and fasten it to the bottom
Mount the fresh air adapter

19
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087014b.idw
90087014b
Scan 87 - hylde af
22-10-2019 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087013.idw
90087013
Scan 87 - hylde af
22-10-2019 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087015.idw
90087015
Scan 87 - justeringsnøgle
22-10-2019 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087015.idw
90087015
Scan 87 - justeringsnøgle
22-10-2019 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
2
3
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087013.idw
90087013
Scan 87 - hylde af
22-10-2019 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
1
4
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087015.idw
90087015
Scan 87 - justeringsnøgle
22-10-2019 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
A ( 1 : 4 )
A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087012.idw
90087012
Scan 87 - spjældknapper af
22-10-2019 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
A ( 1 : 4 )
A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087012.idw
90087012
Scan 87 - spjældknapper af
22-10-2019 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
5 mm
4 mm
2,5 mm
HEIGHT ADJUSTMENT OF STOVE
The stove has four adjustment screws under the stove. Use the adjustment screws to get the stove to stand straight and level.
NOTICE: It is very important that the stove is level to allow an optimal function of the door. Please note that once mounted the
stove can no longer be adjusted!
Remove the screws for the cover plate in the base
Adjust the adjustment screws
Adjustment screws
Lift off the front of the base
Remove the air damper buttons

20
6
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087014c.idw
90087014c
Scan 87 - hylde af
22-10-2019 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087014c.idw
90087014c
Scan 87 - hylde af
22-10-2019 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087014b.idw
90087014b
Scan 87 - hylde af
22-10-2019 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087014c.idw
90087014c
Scan 87 - hylde af
22-10-2019 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
A ( 1 : 4 )
A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 87\90087012.idw
90087012
Scan 87 - spjældknapper af
22-10-2019 KEN
Scan 87
VÆGT:
AREAL:
N/A
N/A
5
HEIGHT ADJUSTMENT OF STOVE
Lift the front of the base up and down into place and
the air damper buttons can then be put back on
Place the front of the base loosely so that the air
dampers are placed on each side of the reinforcement.
Afterwards place the air dampers into the damper holes