SCAN 65-1 User guide

SCAN A/S-DK-5492 VISSENBJERG
Product registration number
Scan 65-series
ASSEMBLY- AND INSTRUCTIONS MANUAL
Please indicate the product registration number at any enquiry
GB
Congratulations on your new Scan wood-burning stove
You have purchased a product by one of Europe’s leading manufacturers of wood-burning stoves, and we are sure that you will have years of
pleasure with your purchase. To make the best possible use of your stove, it is important that you follow our advice and instructions.
Read through this Assembly and Instruction Manual carefully before you start to assemble your stove.

2
Table of contents
Technical data........................................................................................................ 3
Installation
Safety
Technical data and dimensions
Dimension sketch
Type plate
Product registration number
Additional accessories
Loose parts
Assembly ................................................................................................................9
Remove packaging
Positioning your wood-burning stove
Distance to furniture
Distance to flammable materials, shown with insulated flue pipe
Distance to flammable materials, shown with un-insulated flue pipe
Distance to firewall
Height adjustment of stove
Load bearing foundation
Floor plate
Existing chimney and pre-fabricated element chimney
Connection between stove and steel chimney
Requirements for chimney
Connection with 90° elbow pipe
Connecting piece / top outlet
Connecting piece / rear outlet
Fitting the natural stones
Fresh air intake
Closed combustion system
Indicator for control of air supply
Scan 65 open plinth
Accessories ...........................................................................................................20
Heat accumulating stones
Fitting the top plate of natural stones
Instruction for use................................................................................................21
CB technique
Primary air
Secondary air
Baffle plates
Ash drawer
Handle for riddling grate
Instructions for heating...................................................................................... 22
The Clean Air Act 1993
Lighting
Handling fuel
Maintenance........................................................................................................24
Troubleshooting ..................................................................................................26
CONTENTS

3
TECHNICAL DATA
Installation
The house owner is responsible for ensuring that installation and
assembly are in accordance with national and local building regu-
lations as well as the information provided in this Assembly and
Instruction Manual.
When you install any kind of fireplace or stove, you must inform the
local building and housing authorities. In addition you are obliged
to have the installation inspected and approved by a local chimney
sweep prior to commissioning.
To ensure best-possible functionality and safety for your installation,
we advise you to call a professional fitter. Your Scan Dealer will be
able to recommend a qualified fitter in your area. For information on
Scan Dealers, please go to www.scan.dk.
The Scan 65-series consists of:
Safety
Any changes made to the product by the dealer, fitter or user
could result in the product and safety functions not functioning
as intended. The same applies to the fitting of accessories or extra
equipment not supplied by Scan A/S. This could also be the case if
parts that are necessary for the operation and safety of the stove are
dismantled or removed.
Scan 65-1
Steel sides
Scan 65-2
Steel sides
and side windows
Scan 65-1 LB
Steel sides
Scan 65-2 LB
Steel sides
and side windows
Scan 65-3
Natural stones
Scan 65-4
Natural stones
and side windows
Scan 65-5
Steel sides,
baking oven
Scan 65-6
Steel sides,
baking oven and
side windows
Scan 65-7
High Top,
natural stones
Scan 65-8
High Top,
natural stones and
side windows
Scan 65-9
High Top,
steel sides
Scan 65-10
High Top, steel sides
and side windows

4
senotherm
30 cm
65-1 /2 ca. 123 kg
65-3 ca. 180 kg
65-4 ca. 168 kg
65-5/6 ca. 162 kg
65-7 ca. 258 kg
65-8 ca. 246 kg
65-9/10 ca. 162 kg
144 mm
148 mm
65-1, 65-3, 65-5, 65-7 & 65-9
0,08
975
< 20
104
82
110
A+
6
221
300
5
12
15-18
13,3
2
1,5
65-2, 65-4, 65-6, 65-8 & 65-10
0,1
1221
< 20
117
79
106
A
6
240
305
6
12
15-18
12,5
2
1,5
4TECHNICAL DATA
Technical data Unit
CO Emission at 13% O2 %
CO Emission at 13% O2 mg/Nm3
Dust @ 13% O2 mg/Nm3
Nox @ 13% O2 mg/Nm3
Efficiency %
Energy efficiency index
Energy efficiency class
Nominel output kW
Chimney temperature EN 13240 °C
Temperature in connecting piece °C
Amount of smoke g/sek
Sub-pressure EN 13240 Pa
Recommended sub-pressure in connecting piece Pa
Required combustion air supply Nm3/h
Fuel Wood
Fuel consumption kg/h
Amount of fuel kg
Technical data Unit
CO Emission at 13% O2 %
CO Emission at 13% O2 mg/Nm3
Dust @ 13% O2 mg/Nm3
Nox @ 13% O2 mg/Nm3
Efficiency %
Energy efficiency index
Energy efficiency class
Nominel output kW
Chimney temperature EN 13240 °C
Temperature in connecting piece °C
Amount of smoke g/sek
Sub-pressure EN 13240 Pa
Recommended sub-pressure in connecting piece Pa
Required combustion air supply Nm3/h
Fuel Wood
Fuel consumption kg/h
Amount of fuel kg
Test in compliance with EN 13240
Technical data and dimensions
Materials Steel plate, cast iron,
galvanised sheet, vermicolite
Surface treatment
Max. wood length
Weight
Weight
Weight
Weight
Weight
Weight
Weight
Connecting piece internal diameter
Connecting piece external diameter
Approval type Intermittent fuelling*
*Intermittent operation in this context means normal use of a
wood-burning stove. In other words, you should let the fire die down
until only the embers are left before refueling.
This stove is produced in accordance with type approval for the
product, which also covers the product’s Assembly and Instruction
Manual.
The Declaration of Performance (DoP) is available from www.scan.dk

5
65-5, 65-6, 65-7, 65-8, 65-9 & 65-10
65-1, 65-2, 65-3 & 65-4
A-A ( 1 : 10 )
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 65\90065015.idw
90065015
Målskitse, Scan 65-1/2 Standard
17-01-2017 SR
Scan 65
VÆGT:
AREAL:
N/A
N/A
Top Bund
1132
490
210****
72
1012*
1111**
380
190
154
114
90***
A-A ( 1 : 10 )
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 65\90065015.idw
90065015
Målskitse, Scan 65-1/2 Standard
17-01-2017 SR
Scan 65
VÆGT:
AREAL:
N/A
N/A
Top Bund
1132
490
210****
72
1012*
1111**
380
190
154
114
90***
A-A ( 1 : 10 )
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 65\90065015.idw
90065015
Målskitse, Scan 65-1/2 Standard
17-01-2017 SR
Scan 65
VÆGT:
AREAL:
N/A
N/A
Top Bund
1132
490
210****
72
1012*
1111**
380
190
154
114
90***
A-A ( 1 : 10 )
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 65\90065015.idw
90065015
Målskitse, Scan 65-1/2 Standard
17-01-2017 SR
Scan 65
VÆGT:
AREAL:
N/A
N/A
Top Bund
1132
490
210****
72
1012*
1111**
380
190
154
114
90***
A-A ( 1 : 10 )
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 65\90065017.idw
90065017
Målskitse, Scan 65-5/6 Bagerum
17-01-2017 SR
Scan 65
VÆGT:
AREAL:
N/A
N/A
Top Bund
1433
490
154
114
92***
158210****
1098*
1415**
382
192
A-A ( 1 : 10 )
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 65\90065017.idw
90065017
Målskitse, Scan 65-5/6 Bagerum
17-01-2017 SR
Scan 65
VÆGT:
AREAL:
N/A
N/A
Top Bund
1433
490
154
114
92***
158210****
1098*
1415**
382
192
A-A ( 1 : 10 )
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 65\90065017.idw
90065017
Målskitse, Scan 65-5/6 Bagerum
17-01-2017 SR
Scan 65
VÆGT:
AREAL:
N/A
N/A
Top Bund
1433
490
154
114
92***
158210****
1098*
1415**
382
192
1433 (65-5/6 + 9/10)
1448 (65-7/8)
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 65\90065017.idw
90065017
Målskitse, Scan 65-5/6 Bagerum
17-01-2017 SR
Scan 65
VÆGT:
AREAL:
N/A
N/A
Top Bund
1433
490
154
114
92***
158210****1415**
382
192
A-A ( 1 : 10 )
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 65\90065019.idw
90065019
Målskitse, Scan 65-9/10 High top, stål
17-01-2017 SR
Scan 65
VÆGT:
AREAL:
N/A
N/A
Top Bund
490
154
114
92***
1433
382
192
158210****
1098*
1196**
65-9/10
1415** (65-5/6)
1201** (65-7/8)
1196** (65-9/10)
5
TECHNICAL DATA
Dimension sketch
* Centre rear outlet
** Height to the begin-
ning of the connecting
piece at top outlet
*** Fresh air intake bottom
**** Fresh air intake at the
back of the stove

6
65-1 LB & 65-2 LB
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 65\90065028.idw
90065028
Målskitse Scan 65-1/2 Low Base
27-06-2017 pcj
Scan 65
VÆGT:
AREAL:
798,50 kg
66175237 mm^2
DIM.: Scan A/S
490
1000
12150
979
880
154
114
90
190
380
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 65\90065028.idw
90065028
Målskitse Scan 65-1/2 Low Base
27-06-2017 pcj
Scan 65
VÆGT:
AREAL:
798,50 kg
66175237 mm^2
DIM.: Scan A/S
490
1000
12150
979
880
154
114
90
190
380
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 65\90065028.idw
90065028
Målskitse Scan 65-1/2 Low Base
27-06-2017 pcj
Scan 65
VÆGT:
AREAL:
798,50 kg
66175237 mm^2
DIM.: Scan A/S
490
1000
12150
979
880
154
114
90
190
380
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 65\90065028.idw
90065028
Målskitse Scan 65-1/2 Low Base
27-06-2017 pcj
Scan 65
VÆGT:
AREAL:
798,50 kg
66175237 mm^2
DIM.: Scan A/S
490
1000
12150
979
880
154
114
90
190
380
66
TECHNICAL DATA
TECHNICAL DATA
* Centre rear outlet
** Height to the begin-
ning of the connecting
piece at top outlet
*** Fresh air intake bottom
**** Fresh air intake at the
back of the stove
Dimension sketch
* Centre rear outlet
** Height to the begin-
ning of the connecting
piece at top outlet
*** Fresh air intake bottom
**** Fresh air intake at the
back of the stove
Dimension sketch

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064010.idw
90064010
Typeskilt og registreringsnummer
21-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
6
Scan 65-1 - 65-3 - 65-5 - 65-7 - 65-9
Freestanding room heater fired by solid fuel
Standard:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
EN 13240 Dop 90065600
Wood
Intermittent
EUR
Norway
Classification
Intermittent
Certificate/Standard
EN 13240
Approved by
RWE Power AG
Teknologisk Institut
Dust at 13% O2: < 20 mg/Nm³
Flue gas temperature: 300°C
Nominal heat output: 6 kW
Efficiency: 82%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Side: 350 mm - Back: 150 mm - Front: 1000 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlene Brennstoffe.
1000 05-2015
0,08% 975 mg/Nm³
Schweiz
Germany
RWE Power AG
RWE Power AG
Scan 65-2 - 65-4 - 65-6 - 65-8 - 65-10
Freestanding room heater fired by solid fuel
Standard:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
EN 13240 Dop 90065601
Wood
Intermittent
EUR
Norway
Classification
Intermittent
Certificate/Standard
EN 13240
Approved by
RWE Power AG
Teknologisk Institut
Dust at 13% O2: < 20 mg/Nm³
Flue gas temperature: 305°C
Nominal heat output: 6 kW
Efficiency: 79%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Side: 500 mm - Back: 150 mm - Front: 1000 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlene Brennstoffe.
1000 05-2015
0,10% 1221 mg/Nm³
Schweiz
Germany
RWE Power AG
RWE Power AG
65-2, 65-4, 65-6, 65-8 & 65-10
65-1, 65-3, 65-5,65-7 & 65-9
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064010.idw
90064010
Typeskilt og registreringsnummer
21-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
6500000
7
TECHNICAL DATA
(With side windows)
(Without side windows)
Type plate
Product registration number
Type plate
All Scan wood-burning stoves are fitted with a type plate that speci-
fies the approval standards and the distance to flammable materials.
The type plate is located at the rear of the stove.
Product registration number
All Scan wood-burning stoves are provided with a product registra-
tion number. You will always need to quote this number when con-
tacting your dealer or Scan A/S.
The product registration number is located at the rear of the stove.

7
8TECHNICAL DATA
Additional accessories
• Small shaped floor plate in glass or steel
• Large shaped floor plate in glass or steel
• Natural stones top plate for stove with rear outlet
• Natural stones top plate for stove with top outlet
• Heat accumulating stones (Scan 65-7, 65-8, 65-9 & 65-10)
Loose parts
The loose parts are located in the stove's ash drawer.
Scan 65, all types:
• Glove
• Seal
• 4 pcs. screws for fastening the connecting piece
• 1 pcs. indicator for control of air supply
• 1 pcs. screw M5x6, must be placed for United Kingdom.
Scan 65-3 and 65-4:
• 4,5 m gasket
Scan 65-7 and 65-8:
• 7 m gasket
Disposal of packaging
Your Scan stove may come supplied with the following packaging:
WOOD PACKAGING:
The wood packaging can be reused and after final use can be inciner-
ated as a CO2 neutral product or sent for recycling.
FLAMINGOTOP:
Send for recycling or waste disposal.
FOAM:
Send for recycling or waste disposal.
PLASTIC BAGS:
Send for recycling or waste disposal.
STRETCH FILM/PLASTIC FILM:
Send for recycling or waste disposal.

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064020.idw
90064020
Brændeovn påpalle
21-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064020.idw
90064020
Brændeovn påpalle
21-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064027.idw
90064027
Montage afdækningsknapper
11-07-11 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
89
Screws to be removed
Remove the screws securing the stove to the pallet.
Fit the plastic plugs from the service box
into the transport protection holes.
Remove the protection between the baffle plates, before taking the
stove into use!
Protection for baffle plates
Put back the upper plate on the pins, as the protection pushes the
plate upwards.
Pin for baffle plate
ASSEMBLY
Removal of packaging
Check that the stove is not damaged before starting to install it.
The stove comes attached to a wooden pallet on delivery.

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064003.iam
90064003
Opstilling mod brændbar væg, ovn med sideruder
28-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
50
500
250
250
778
536
745
240
513
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064043.iam
90064043
Opstilling mod brændbar væg, ovn uden sideruder
22-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
50
350
253
595
240
50
50
313
578
9
65-2, 65-4, 65-6, 65-8 & 65-10
65-1, 65-3, 65-5,65-7 & 65-9
10 ASSEMBLY
Distance to flammable materials, shown with insulated flue pipe
(With side windows)
Without side windows)
Positioning your wood-burning stove
The stove must be set up so that the stove itself, the flue pipe, and the
chimney can all be cleaned.
Distance to furniture: 1000 mm
You should however assess whether furniture or other items might
become excessively dry due to being too close to the stove.
National and local regulations governing safety distances for wood-
burning stoves must be complied with.
If the stove is to be connected to a steel chimney, the chimney require-
ments in terms of safety distances must be met.
Distance to flammable materials
These distances apply for an uninsulated flue pipe/insulated flue
pipe, all the way down to the stove, having a minimum of 30 mm
insulation.

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064050.iam
90064050
brændbar + uisoleret røgrør - Scan 64 med sideglas
23-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
150
500
536
250
778
250
340
745
513
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064049.idw
90064049
Brændbar + uisoleret røgrør - Scan 64 uden sideglas
23-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
150
350
340
595
100
363
628
100
324
10
65-2, 65-4, 65-6, 65-8 & 65-1065-1, 65-3, 65-5,65-7 & 65-9
11
ASSEMBLY
Distance to flammable materials, shown with un-insulated flue pipe
(With side windows)(Without side windows)

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064047.iam
90064047
Brandmur og isoleret røgrør - Scan 64 uden sideglas
29-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
50
50
100
50
50
700
700
960
700
700
253
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064047.iam
90064047
Brandmur og isoleret røgrør - Scan 64 uden sideglas
29-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
50
50
100
50
50
700
700
960
700
700
253
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064048.iam
90064048
Opstilling til brandmur, scan 64 med sideglas
25-08-11 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
800
760
700
860
860
100
100
50
300
50
324
11
65-2, 65-4, 65-6, 65-8 & 65-10
65-1, 65-3, 65-5,65-7 & 65-9
12 ASSEMBLY
Flammable material
Firewall
Flammable material
Firewall
(With side windows)
Without side windows)
Distance to firewall
110 mm brick or other material with a corresponding insulation
ability.
The distances presuppose the use of an insulated flue pipe with min.
30 insulation all the way to the stove.

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064004.idw
90064004
Scan 64 med lille gulvplade
29-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064016.idw
90064016
Scan 64 med stor gulvplade
29-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064044.idw
90064044
Justerskruer
10-08-11 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064044.idw
90064044
Justerskruer
10-08-11 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064053.idw
90064053
Ovn med vatterpas
04-12-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
12 13
ASSEMBLY
Large shaped floor plate in glass or steel
Ajustment screw
IT IS VERY IMPORTANT THAT THE STOVE IS LEVEL TO ALLOW AN
OPTIMAL FUNCTION OF THE DOOR. PLEASE NOTE THAT ONCE
MOUNTED THE STOVE CAN NO LONGER BE ADJUSTED!
Small shaped floor plate
in glass or steel
Height adjustment of stove
The stove has four adjustment screws under the stove. Use the adjust-
ment screws to get the stove to stand straight and level.
Load-bearing subsurface
All items in our product range come under the category of lightweight
fireplaces and stoves and do not normally require any reinforcement
of the beam structure. They can be positioned on ordinary beams/
floor.
However, you should make sure that the load bearing underlay can
bear the weight of the wood-burning stove and that of the chimney.
Floor plate
If you are erecting the stove on a flammable floor, you must comply
with the national and local regulations on the size of any non-flam-
mable subsurface required to cover the floor around the stove.
Your local Scan dealer can advise you on regulations concerning pro-
tection of flammable materials in the vicinity of your stove.
The floor plate’s function is to protect the floor and flammable mate-
rial against any sparks that may occur.
A floor plate can be made of steel or glass, but the stove can also be
erected on clinker concrete, natural stone or similar materials.
This Scan wood-burning stove has an integrated floor plate at the bot-
tom and can thus be erected directly on flammable material without
the need for further protection underneath the stove.

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064019.idw
90064019
Scan 64 med knærør
29-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
I:\Udvikling\TEGNING\Scan62\90063020.idw
90063020
Røgstuds med pakning
03-06-09 BC
Scan 63
VÆGT:
AREAL:
0,70 kg
93327 mm^2
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064013.idw
90064013
Afmontage topplade + røgstuds
30-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
13
14 ASSEMBLY
Connecting
piece
Ceramic
asket
Mount the ceramic gasket on the connecting piece
Lift the top plate and connecting piece off the stove.
Existing chimney and pre-fabricated element
chimney
If you intend to connect your stove to an existing chimney, it makes
sense to contact an authorised Scan dealer, or a local chimney sweep,
for advice.These experts will also let you know if your chimney needs
renovating.
When connecting a pre-fabricated element chimney, follow the manu-
facturer’s connection instructions for the relevant chimney type.
Connection between stove and steel chimney
Your Scan dealer, or local chimney sweep, can advise you on choos-
ing a make and type of steel chimney (we recommend using JØTUL’s
chimney system). This ensures that the chimney will match your
wood-burning stove. As a general rule, the length of the chimney
should not be less than 4metres, measured from the top of the stove.
Specific weather or installation conditions might require a different
length.
Choosing the wrong length or diameter of steel chimney could im-
pair functionality.
Always observe the chimney vendor‘s instructions precisely.
Requirements for chimney
The chimney must be labelled T400 and G for soot testing.
Connecting piece / top outlet
The stove is prepared from the factory for top outlet.
The connecting piece is placed loosely in the top outlet of the stove.
The gasket for the connecting piece and the screws for fastening the
connecting piece are in the stove’s ash drawer.

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064014.idw
90064014
Montage af røgstuds i topafgang
30-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064014.idw
90064014
Montage af røgstuds i topafgang
30-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
14
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
I:\Udvikling\TEGNING\Scan62\90063020.idw
90063020
Røgstuds med pakning
03-06-09 BC
Scan 63
VÆGT:
AREAL:
0,70 kg
93327 mm^2
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064013.idw
90064013
Afmontage topplade + røgstuds
30-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
15
ASSEMBLY
Connecting
piece
Ceramic
asket
Fasten the connecting piece with screws from the ash drawer and
replace the top plate.
4 pcs. M5X10 mm screw
Connection piece / rear outlet
The stove is prepared from the factory for top outlet.
The connecting piece is placed loosely in the top outlet of the stove.
The gasket for the connecting piece and the screws for fastening the
connecting piece are in the stove’s ash drawer.
Lift the top plate and connecting piece off the stove.

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064012.idw
90064012
Afmontage dækplade for bagafgang
30-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064012.idw
90064012
Afmontage dækplade for bagafgang
30-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064024.idw
90064024
Afmontage dækplade i varmeskjold
31-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064024.idw
90064024
Afmontage dækplade i varmeskjold
31-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064052.idw
90064052
Varmeskjold løftes af ovn
31-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
15
16 ASSEMBLY
Cut off the cover plate from the rear plate with cutting pliers at the
fastening points.
Fastening points
Lift the heat shield off the stove and cut the cover plate free using
cutting pliers at the fastening points and remove.

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064026.idw
90064026
Montage røgstuds bagafgang
11-07-11 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064025.idw
90064025
Afmontage dæksel for bagafgang
31-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064014.idw
90064014
Montage af røgstuds i topafgang
30-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064028.idw
90064028
Montage af dæksel i topafgang
30-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
16 17 ASSEMBLY
4 pcs. M5X10 mm screw
Fit the cover and tighten it. Replace the top plate.Remove the cover. This is to be used later as a seal and cover at the
top of the smoke outlet.
Fit the connecting piece with the four screws found in the stove’s ash
drawer. Hook the heat shield onto the stove.
Cover plate

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\CAD\Inventor 2015\Templates\Standard - Manual.idw
90065008
fedsten pakninger m ruder
24-08-2015 hms
Scan 65
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\CAD\Inventor 2015\Templates\Standard - Manual.idw
90065007
fedsten pakninger ht
24-08-2015 hms
Scan 65
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064046.idw
90064046
Scan 64-3 og Scan 64-4 m. isoleringsbånd f. fedtsten
29-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064046.idw
90064046
Scan 64-3 og Scan 64-4 m. isoleringsbånd f. fedtsten
29-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
17
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\CAD\Inventor 2015\Templates\Standard - Manual.idw
90065006
fedsten u rude
24-08-2015 hms
Scan 65
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
90065009
fedsten pakninger m ruder
24-08-2015 hms
Scan 65
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90065005.idw
90065005
fedtsten ht
24-08-2015 hms
Scan 65
VÆGT:
AREAL:
N/A
N/A
=
65-3 65-4
65-7 65-8
18 ASSEMBLY
The delivered gasket (4,5/7 m) should be cut in appropiate lengths
and sticked onto the sides of the stove as shown below.
Gasket
Fitting the natural stones
Some of the stoves are delivered with loose natural stone plates for
mounting on the sides of the stove.
It is a natural material, wherefore there might be differences in struc-
ture and form.
Each natural stone must be mounted with distance bushings and
screws which are already mounted in the stones.

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064032.idw
90064032
Montage af fedtstenssider
29-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064032.idw
90064032
Montage af fedtstenssider
29-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064051.idw
90064051
Frisklufttilførsel
29-08-12 bc
Scan 64
VÆGT:
AREAL:
N/A
N/A
18 19 ASSEMBLY
Hook the natural stone sides onto the stove.
Remove the cover plate at the back of the stove or the cover plate at
the bottom of the wood compartment store, as shown on page 15.
Connect outside air to the connection piece underneath the com-
bustion chamber.
External combustion
air via floor
External
combustion
air via wall
Fresh air intake
In a well-insulated house the air used for the combustion process
has to be replaced. This particularly applies to houses with mecha-
nical ventilation. There are different ways of making sure that air is
exchanged.The most important thing is to ensure that there is a sup-
ply of air to the room where the wood stove is located. The external
wall vent must be located as close to the wood stove as possible, and
you must be able to close it when you are not using the stove.
National and local building regulations must be followed with regard
to connection of a fresh air intake.
Closed combustion system
You should use the closed combustion system for the wood-burning
stove if you live in a newly-built, airtight home. External combustion
air is connected through a ventilation pipe via the wall or floor.
It must be possible to shut off the ventilation pipe with a valve, when
the stove is not in use. Minimum Ø100 mm ventilation pipe, maxi-
mum length: 6meters with a maximum of one bend.
If you want external combustion air via a wall, remove the cover plate
at the rear of the stove with a pair of cutting pliers. See the procedure
in this manual.
If the external combustion air is connected at the rear, the dis-
mounted plate must be mounted on the hole for external air in the
bottom of the stove.
NOTE: if the stove has a fresh air connection or closed combustion,
the ventilation pipe must be open, when the stove is in use.

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064041.idw
90064041
Låge med gennemsynssokkel
29-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064010.idw
90064010
Typeskilt og registreringsnummer
21-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064017.idw
90064017
Scan 64 med fedtstensplade for topafgang
29-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064018.idw
90064018
Scan 64 med fedtstenstopplade for bagafgang
29-08-12 BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
19
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\90065005.idw
90065005
varmeakkumulerende sten
15-10-2015 hms
Scan 65
VÆGT:
AREAL:
N/A
N/A
65-9 & 65-1065-7 & 65-8
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 65\90065014.idw
90065014
Scan 65 high varm akk.
17-01-2017 jm
Scan 65
VÆGT:
AREAL:
N/A
N/A
DIM.: Scan A/S
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 65\10065900_Manual.iam
10065900_Manual
22-05-2015 jwa
VÆGT:
AREAL:
N/A
N/A
NAVN: STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068058.idw
90068058
klargøring til vægbeslag
12-05-2015 hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 65\90065025.idw
90065025
Lukket spjæld 26-01-17
jm
Jotul F230
Weight: Area:
N/A N/A
Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 65\90065026.idw
90065026
Åben spjæld 26-01-17
jm
Jotul F230
Weight: Area:
N/A N/A
20 ASSEMBLY / ACCESSORIES
Cover plate to
be removed
Do not remove the
radiation plate
The vent for adjustment of the convection air is placed at the back
of the high top
ClosedOpen
Cut off this plate from the heat shield in order to make place for the
heat accumulating stones
Open plinth
If you want open plinth, remove the wood compartment door and its
stop as well as the large cover plate at the back of the stove.
Heat-storage stone
Heat-storage stones are made from a special material with a high
heating capacity. The stones are heated up during the firing and
gives off the heat again after the firing, which means that the stove
stays warm for a longer time.
Firing with the vent open will give a quicker heating. Firing with the
vent closed will extend the heating time of the stove.
Fitting the natural stone top
You can buy a natural stone top as an accessory. Place the stone top
on the steel top plate