SCAN 45 Mini User manual

SCAN 45
INSTRUCTIONS FOR
INSTALLATION AND USE
Maxi
Mini
MONTERINGSVEJLEDNING
med brugs- og fyringsanvisning
Indhold:
Generelle råd og anvisninger . . . . . . . . . .2-3
Reklamationsret
Type- og miljøgodkendelse
Udpakning
Tilbehør til din pejs
Montering af kakler og fedtsten
Kvalitetskontrol
Anmeldelsespligt
Skorstenstjek
Skorstensløsninger
Bærende underlag
Brændbar eller ikke brændbar væg
Gulvplade
Varmefordeling
Justerskrue
Typeskilt
Produktionsnr.
Servicepakke
Monteringsvejledning. . . . . . . . . . . . . . . . .4-7
Tilslutning til eksisterende/muret skorsten
Tilslutning topafgang til stålskorsten
Forbrændingsluft udefra
Brugs- og fyringsanvisning . . . . . . . . . . . 8-10
Vedligeholdelse af pejseovnen
Håndtering af brændsel
Optænding og fyring
Fejlsøgning . . . . . . . . . . . . . . . . . . . . . . . . 11
SCAN 3
BRUGSANVISNING
TildenneBrugsanvisninghørerogsåen
generelMonteringsvejledning.Udgave03.03-DK
MONTERINGSVEJLEDNING
medbrugs-ogfyringsanvisning
Indhold:
Generellerådoganvisninger..........2-3
Reklamationsret
Type-ogmiljøgodkendelse
Udpakning
Tilbehørtildinpejs
Monteringafkaklerogfedtsten
Kvalitetskontrol
Anmeldelsespligt
Skorstenstjek
Skorstensløsninger
Bærendeunderlag
Brændbarellerikkebrændbarvæg
Gulvplade
Varmefordeling
Selvlukkendelåge
Justerskrue
Typeskilt
Produktionsnr.
Servicepakke
Monteringsvejledning.................4-7
Tilslutningtileksisterende/muretskorsten
Tilslutningtopafgangtilstålskorsten
Forbrændingsluftudefra
Brugs-ogfyringsanvisning...........8-10
Vedligeholdelseafpejseovnen
Håndteringafbrændsel
Optændingogfyring
Fejlsøgning........................11
Tildennemonteringsvejledninghørerogsåen
separatbrugsanvisningfordenenkeltepejs.
Udgave02/03-DK
Til denne monteringsvejledninghørerogsåen
separat brugsanvisningfordenenkelte pejs.
Udgave 02/03 - DK
This manual is accompanied by a
pamphlet with General Instructions
for Installation.
Edition 06.11.09 - GB
Approved according to EN 13240

Clean combustion
The SCAN 45 uses the "CB technique"
(Clean-Burn) to ensure an optimally clean
combustion. The extra combustion air is pre-
heated and led into the combustion chamber
close to the ceramic smoke deflector
Ceramic smoke deflectors
Lift up the lower ceramic smoke deflector,
pull out the pins in the lateral combustion
chamber plates and remove the deflector. The
upper deflector is removed in the same way.
You have chosen a product from one of Europe's leading
manufacturers of wood-burning stoves. We are convinced
that your stove will be to your full satisfaction and give you
many hours of pleasure if you follow the advice and instruc-
tions of this manual.
Please read this manual as well as the General Instructions
for Installation before beginning the installation.
Congratulations on your new SCAN
stove!
3
5
1
4
1 Ashtray. When you open the door, you have access to the
ashtray, which is placed below the combustion chamber.
Attention! Be careful when you empty ashes from the stove.
There may be embers left for up to 24 hours after the stove
was last used.
2 Lid for ashtray. Under the ashtray you will find a lid to put
on top of the ashtray when you carry it out for emptying.
3 Handle for shaking grate. The stove is equipped with a
shaking grate. When you activate the grate handle, the
ashes from the combustion chamber are emptied into the
ashtray.
4 Regulation for primary air. Push the button sideways. Left
position is closed and right position is open. The primary
air is used when lighting and refuelling the stove. It should
always be closed during continuous firing.
5 Regulation for combustion air. Push the button sideways.
Left position is closed and right position is open. The air is
used for combustion and regulates the output of the stove.
.
2
SCAN 45
Wood / briquettes Fuel kg/h (beechwood
max. 20% humidity)
SCAN 45 1,6 kg
Combustion air % 100
Primary air % 25
Adjustment of the air
The ashtray, shaking grate, and primary air
should always be closed during continuous
firing.

Adjustment of the handle
The handle can be loosened and adjusted at the lower
closing hook by means of a hexagon spanner.
Accessories
For this model you can have the following accessories:
Handle
The handle is elegantly integrated on the moul-
ding below the door. Pull out the handle to open.
Adjustment screws
The stove has two adjustment screws on the bot-
tom that can be used for levelling the stove.
Self-closing door (BA 1)
The door is prepared with a self-closing function at the factory.
If you tighten the spring with the delivered hexagon span-
ner, the door will close automatically when you let go of it.
• Soapstone-top plate
• Cover for elbow 645 or 900 mm
• Connection piece for fresh-air intake
• Shaped floor plate (steel or glass)
SCAN 45
Please do not forget to remove the foil before
the first firing!
Data for calculation of the chimney
Stove
model
SCAN
Connecting
adaptor
mm
1
Density of
flue gas
flow
g/s
2
Flue gas
tempera-
ture
oC
3
Minimum
draft
Pa
4
Density of
flue gas
flow
g/s
5
Flue gas
temperature
oC
6
Minimum
draft
Pa
7
0,8
Minimum
draft
Pa
45 150 - - - 5 310 14 11
With closed doorsWith open doors
Column 2 and 5 show the flue gas temperature in the connecting adaptor
Column 3 and 6 show the lowest/minimum draft in Pa by rated value
Column 7 shows the lowest/minimum draft in Pa by 0.8 x rated value
The stove can be prepared for an external air sup-
ply where fresh air is let directly into the combus-
tion chamber (can also be done subsequently by
the authorized dealer).

Scan A/S - DK-5492 Vissenbjerg
157
195 831
970
410
410
157
395 1031
1170
410
410
Warranty conditions
All SCAN wood-burning stoves and inserts are made of first-class material and
are subject to a strict quality control before they leave the factory. However, if
an error should occur, we back all SCAN wood-burning stoves and inserts with
an extensive, five-year limited warranty.
See also the General Instructions for Installation delivered with your stove
for more details.
Technical info
Rated output: 5 kW
Min./max.: 2 - 7 kW
Weight: Mini 90 kg / Maxi 98 kg
Connection piece diameter: int. 135mm / ext. 148mm
**
*
**
*To the middle of the rear outlet
** Connection piece to fresh air intake
Distances to flammable materials (mm)
Maxi Mini
Production number
Write the production number of your
stove here so that you have it at hand
in case you need to contact us.
You can choose between several floor
plates in different shapes and dimensions
for your stove. Furthermore, you can have
a specially made, shaped floor plate for
the SCAN 45, which is to be placed in
front of the stove. Please contact your
local authorities concerning the security
distances needed.
SCAN 45
*
200
150
150
150
800
Base plate
Radiation
area
Radiation area
Base plate
800
500
500
You should read this manual as well as the General Instructions for Installation before beginning the installation.