SCANGRIP NOVA 2 CONNECT User manual

NOVA 2 CONNECT
03.6100C
2000 lm @ 100%
1500 lm @ 75%
1000 lm @ 50%
500 lm @ 25%
200 lm @ 10%
High efficiency
COB LED
165 lm/W 300-3000
lux @0.5m
16W 2.5-27h @12V
4.0 Ah battery
5.75-58h @18V
5.2 Ah battery
Compatible with
METABO / CAS
battery system
12V 4.0 Ah - 18V5.2 Ah
and 15 other
18V battery packs
by using the
SCANGRIP
CONNECTOR
-10°to +40°C
161x164x78 mm 720g
IK07
IP301m
Built-in power bank
with USB outlet to
charge mobile devices
//Powerbank
* go to scangrip.com to register
BOSCH
BOSCH GREEN
DEWALT
EINHELL
FEIN
FESTOOL
FLEX
HAZET
HIKOKI
INGERSOLL
MAKITA
MILWAUKEE
RIDGID
SNAP-ON
WÜRTH
Add the connector matching
your battery pack
JUST CONNECT
USB power bank:
5V DC / 1A

CAS BATTERY
12V 4.0 Ah
03.6120
CAS BATTERY
18V 5.2 Ah
03.6121
CAS CHARGER
03.6122
BATTERY, CHARGER, CONNECTORS AND
POWER SUPPLY ARE SOLD SEPARATELY
SCANGRIP CONNECTORs
for 18V battery packs
BOSCH - 03.6140C
BOSCH GREEN - 03.6141C
DEWALT - 03.6142C
EINHELL - 03.6143C
FEIN - 03.6144C
FESTOOL - 03.6153C
FLEX - 03.6145C
HAZET - 03.6146C
HIKOKI - 03.6147C
INGERSOLL - 03.6152C
MAKITA - 03.6148C
MILWAUKEE - 03.6149C
RIDGID - 03.6154C
SNAP-ON - 03.6151C
WÜRTH - 03.6150C
Accessories
POWER SUPPLY
03.6123C

NOVA 2 CONNECT
A
B
C
WARNING:
• Always respect applicable legislation for working with electrical equipment in order to reduce the
risk of accidents.
• Avoid looking directly into the beam of light, as this will result in dazzling.
• Do not use the lamp near a naked flame.
• The light source of this luminaire is not replaceable; when the light source reaches its end of life the
whole luminaire shall be replaced.
• Luminaire is only suitable for direct mounting on non-combustible surfaces.
USB POWER OUTLET:
• Built-in USB power outlet to charge mobile devices.
• Output: 5V, 1A
USE:
• To turn the lamp on or off, press the A button.
• To increase the brightness, press the B button.
• To decrease the brightness, press the C button.
• When the brightness level is changed, the new value is
saved, and the lamp will start at that level the next time it is turned on.
BATTERY COMPLIANCE:
• The work light is designed to be used with Metabo CAS batteries.
• The lamp is also compatible with 3rd party 18V batteries by using the SCANGRIP CONNECT system.
• It will accept the following battery voltages; 12Vand 18V.
• It is possible to use a Scangrip power supply instead of a battery.
WARNING - RISK OF FIRE:
• Minimum distance from lighted objects 0.1m
Discarded electrical products must not be disposed of together with household waste. Please
use recycling facilities. Ask your local authority or retailer for advice on recycling.
0.1m
UK