Schlage S-480 User manual

Before using
Product components 4
Front of lock 5
Back of lock 6
How to replace batteries 7
How to apply emergency power 7
Touch-pad & random security function 8
How to change mode 9
Basic function
NORMAL MODE
Register PIN code in normal mode 10
Register card/fob in normal mode 10
Delete all card/fobs in normal mode 11
SAFETY MODE
Register code in safety mode 12
Register card/fob in safety mode 13
Delete card/fob in safety mode 14
Delete individual card/fob 14
Guest PIN mode (Temporary use) 15
Manager code in safety mode 16
Change manager card/fob 16
BASIC FUNCTION
How to open from outside 17
How to lock the door from outside 18
How to lock the door from inside 18
How to set auto/manual locking system 18
Open or close with thumb-tum 19
Open or close with button from inside 19
Hold or release the entry code
or card/fob 19
User Manual Index
Applications
How to set double locking function 20
Auto-locking system 20
Auto-relocking system 20
How to control volume level 21
Warning against unwarrented entry 22
Warning against unauthorised entry 22
System reset 23

4.
Product Components
1.
2. 3.
4.
5.
10.
6. 7. 8.
9.
(4-1)
Installation
template
User manual
No. Product specification
1. Front assembly 71.8mm (W) x 163.6mm (H) x 18.4mm (D) Incl. rubber gasket
2. Back assembly 154mm (W) x 93mm (H) x 37mm (D) Incl. rubber gasket
3. Strike 76mm (W) x 140mm (H) x 28mm (D)
4. Strike spacer 31mm (W) x 140mm (H) x 2mm (D) lEA
31mm (W) x 140mm (H) x 4.5mm (D) 3EA
Using for height of strike
5. Card/fob 2x Card, 2x Fob, 2x Patch
6. Battery 4 pcs (1.5V, “AA” size, LR6 Alkaline) 77mm (W)
7. Mounting plate 77mm (W) x 87mm (H) x 3mm (D)
8. User manual Main user manual
9. Installation template Use for making hole at the door
10. Screw 5 x 60mm 2EA: For back cover
5 x 30mm 2EA: For back cover
5 x 29mm 4EA: For inner upper part
4 x 30mm 12EA: For front/back plate
4 x 19mm 12EA: For front/back plate
TH M5 x 60mm
TH M5 x 30mm
OH M5 x 29mm
FH T4 x 30mm
FH T4 x 19mm
11. Door thickness For 40-50mm
(4-1) Dead Bolt Guider: Should remove after finishing installation.

5.

6.

7.
•
•
•
•
•
•

8.
NOTE
• Do not wear gloves during operation for touch pad.
• When you use random security coding function, actual code should be entered at
the end.
• Please use soft cloth when you clean touch pad.

9.
•
•
•
•
•
•
•
•
•

10.
•
•
•
•
•
•

11.
NOTE
• Previous card/fob memory is deleted automatically after registration of new card.
• To register multiple entry codes, press new entry codes successively and press [*].
• To finish registration, please press [*] one more time.
• Max. 50 cards/fobs can be registered.
• For higher security, please use cards which are supplied by Schlage.

12.
•
•
•
•
•
•

13.
NOTE
• To register multiple cards/fobs, repeat process to input new registration number
and touch with new card/fob successively.
• To finish registration, please press
[*] one more time.
• Registration number shall be two digits. (01 - 50) (Ex: 1 => 01, 2 => 02, etc.)

14.
NOTE
• To use this function, manager has to remember the exact registration number of
each user card.
• If there is no card data on certain registration number, alarm will sound.

15.
•
•
•
•

16.
•
•
•
•
•

17.

18.

19.