SeaView ADA-F2 User manual

INSTALLATION
INSTRUCTIONS
For Seaview Modular Top Plate:
ADA-F2
WWW.SEAVIEWGLOBAL.COM
Refer to website for most up to
date instructions and videos.

3/16” = 4.763mm
PARTS INCLUDED
x1
#12 x 1”
x6
5/16 x 1-1/4”
x4
TOOLS NEEDED
1

Insert rubber gasket onto
the top of the Seaview
mount. (Rubber gasket
included with Seaview
Mount.)
Place the ADA-F2 ontop of
the mount.
Secure the ADA-F2 with the
four bolts using an allen
3/16” wrench.
1
2
3
5/16 x 1-1/4”
x4
2

Mount the FLIR M100 or
M200 to the top of the
adapter provided by FLIR.
Secure the FLIR M100 or
M200 to the adapter with
the hardware specied
by your electronics
manufacturer.
Place the FLIR camera ontop
of the ADA-F2 top plate.
Make sure that the six holes
on the adapter line up with
the six holes on the top
plate.
4
5
6
3

Secure the adapter to the
ADA-F2 top plate using
the provided six #12 x 1”
screws with a philips head
screwdriver.
The four holes on the
back of the ADA-F2 are
for securing the optional
Seaview Light Bar to the top
plate.
12 x 1”
7
8
x6
4

5
This page is intentionally left blank.

6
This page is intentionally left blank.

Tel: [phone]
www.seaviewglobal.com
EUROPEAN OFFICE
Tel: [phone]
www.seaviewprogress.com 3-062618