SeaView LTB-SF User manual

INSTALLATION
INSTRUCTIONS
For Seaview Light Bars:
LTB-SF, LTB-SF2
WWW.SEAVIEWGLOBAL.COM
Refer to website for most up to
date instructions and videos.

PARTS INCLUDED
LTB-SF2 PARTS
X1
X4
1⁄4-20x1”
X4
5⁄16”x3”
X4
5⁄16”x1”
X4
#12x1”
X6
X8
X1 Part #SVFA3
LTB-SF PARTS
X1
X4
5⁄16”x3”
X4
X8
X1 Part #SLADAPT3X1
X6
X6
M6 - 16mm
X4
1/4 - 20 x 1”
X4
5/16” x 1”

5/32 = 4mm
TOOLS NEEDED

Install your light, adapter
or box onto the light bar by
following the instructions
that came with the optional
accessory.
Insert the four nuts into
the adapter plate. This has
most likely been done for
you.
Using a philips head
screwdriver screw in
the six #12x1” screws
to secure the camera
to the adapter plate.
(For #LTB-SF2 only)
#12 x 1”
1
2
3A

Secure the camera or
search light assembly
to the light bar using
the four 1/4-20x1”
bolts and nylon
shoulder washers.
Using a philips head
screwdriver screw in
the six M6 - 16mm
bolts to secure
the camera to the
adapter plate. (For
#LTB-SF only)
3B
1/4-20x1”
4A
M6 - 16

Insert the light bar into the
light bar hole located on the
back of the Seaview mount.
5
4B Secure the camera or search light assembly to the light bar
using the four 1/4-20x1” bolts and nylon shoulder washers.
1/4-20x1”

Using the four
5/16x1” bolts and
nylon shoulder
washers, secure the
light bar by bolting it
to the top plate.
5/16x1”
6A
When using the Seaview #SP1-MOD or #SP2-MOD Spreader
Kits use the 5/16x3” bolts.
6B

Tel: [phone]
www.seaviewglobal.com
EUROPEAN OFFICE
Tel: [phone]
www.seaviewprogress.com 4-41892019